Re: [PATCH 6/7] dt-bindings: iio: sx9360: Add precharge resistor setting

[Jonathan Cameron <jic23@kernel.org>]

On Tue, 15 Mar 2022 10:30:41 -0700
Gwendal Grignou <gwendal@chromium.org> wrote:

> Allow configure the resistance used during precharge.
> 
> Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
> ---
>  .../bindings/iio/proximity/semtech,sx9360.yaml           | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
> index 63e1a1fd00d4c..a0f8a454481db 100644
> --- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
> +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
> @@ -61,6 +61,14 @@ properties:
>        UINT_MAX (4294967295) represents infinite. Other values
>        represent 1-1/N.
>  
> +  semtech,input-precharge-resistor:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    default: 0
> +    description:
> +      Pre-charge input resistance in kOhm.
Another one to make in ohms and give it appropriate prefix so we don't need
the ref line.

Thanks,

Jonathan

> +    minimum: 0
> +    maximum: 30
> +
>  required:
>    - compatible
>    - reg
> @@ -85,5 +93,6 @@ examples:
>          semtech,resolution = <256>;
>          semtech,proxraw-strength = <2>;
>          semtech,avg-pos-strength = <64>;
> +        semtech,input-precharge-resistor = <4>;
>        };
>      };