[PATCH v3 3/9] arm64: dts: qcom: sm6375: Add GPI DMA nodes

[Konrad Dybcio <konrad.dybcio@linaro.org>]

Add nodes for GPI DMA hosts on SM6375.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6375.dtsi | 40 ++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 9b1a497e5ca7..62a64dd731a0 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -567,6 +567,46 @@ rpm_msg_ram: sram@45f0000 {
 			reg = <0 0x045f0000 0 0x7000>;
 		};
 
+		gpi_dma0: dma-controller@4a00000 {
+			compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x04a00000 0 0x60000>;
+			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0x16 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
+		gpi_dma1: dma-controller@4c00000 {
+			compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x04c00000 0 0x60000>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <10>;
+			dma-channel-mask = <0x1f>;
+			iommus = <&apps_smmu 0xd6 0x0>;
+			#dma-cells = <3>;
+			status = "disabled";
+		};
+
 		usb_1: usb@4ef8800 {
 			compatible = "qcom,sm6375-dwc3", "qcom,dwc3";
 			reg = <0 0x04ef8800 0 0x400>;
-- 
2.38.1