From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: linux-arm-msm@vger.kernel.org, andersson@kernel.org,
agross@kernel.org, krzysztof.kozlowski@linaro.org
Cc: patches@linaro.org, Konrad Dybcio <konrad.dybcio@linaro.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 8/9] arm64: dts: qcom: sm6375-pdx225: Configure SMD RPM regulators
Date: Tue, 15 Nov 2022 16:27:26 +0100 [thread overview]
Message-ID: <20221115152727.9736-9-konrad.dybcio@linaro.org> (raw)
In-Reply-To: <20221115152727.9736-1-konrad.dybcio@linaro.org>
Configure regulators present on the Xperia 10 IV that are reachable
via SMD RPM.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../qcom/sm6375-sony-xperia-murray-pdx225.dts | 182 ++++++++++++++++++
1 file changed, 182 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
index c830124cb483..0f1ddfa28c89 100644
--- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
+++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -106,6 +106,188 @@ &qupv3_id_1 {
status = "okay";
};
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pm6125-regulators";
+
+ pm6125_s5: s5 {
+ regulator-min-microvolt = <382000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ pm6125_s6: s6 {
+ regulator-min-microvolt = <320000>;
+ regulator-max-microvolt = <1374000>;
+ };
+
+ pm6125_s7: s7 {
+ regulator-min-microvolt = <1574000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ /*
+ * S8 is VDD_GFX
+ * L1 is VDD_LPI_CX
+ */
+
+ pm6125_l2: l2 {
+ regulator-min-microvolt = <1170000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ pm6125_l3: l3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm6125_l4: l4 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm6125_l5: l5 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3050000>;
+ };
+
+ pm6125_l6: l6 {
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ pm6125_l7: l7 {
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm6125_l8: l8 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ pm6125_l9: l9 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ pm6125_l10: l10 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ };
+
+ pm6125_l11: l11 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ };
+
+ pm6125_l12: l12 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ pm6125_l13: l13 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1980000>;
+ };
+
+ pm6125_l14: l14 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ };
+
+ pm6125_l15: l15 {
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3544000>;
+ };
+
+ pm6125_l16: l16 {
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ };
+
+ /* L17 is VDD_LPI_MX */
+
+ pm6125_l18: l18 {
+ regulator-min-microvolt = <830000>;
+ regulator-max-microvolt = <920000>;
+ };
+
+ pm6125_l19: l19 {
+ regulator-min-microvolt = <1624000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ pm6125_l20: l20 {
+ regulator-min-microvolt = <1624000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ pm6125_l21: l21 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3400000>;
+ };
+
+ pm6125_l22: l22 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <3544000>;
+ };
+
+ pm6125_l23: l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3400000>;
+ };
+
+ pm6125_l24: l24 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <3544000>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,rpm-pmr735a-regulators";
+
+ /*
+ * S1 is VDD_MX
+ * S2 is VDD_CX
+ */
+
+ pmr735a_l1: l1 {
+ regulator-min-microvolt = <570000>;
+ regulator-max-microvolt = <650000>;
+ };
+
+ pmr735a_l2: l2 {
+ regulator-min-microvolt = <352000>;
+ regulator-max-microvolt = <796000>;
+ };
+
+ pmr735a_l3: l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pmr735a_l4: l4 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ pmr735a_l5: l5 {
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <824000>;
+ };
+
+ pmr735a_l6: l6 {
+ regulator-min-microvolt = <504000>;
+ regulator-max-microvolt = <868000>;
+ };
+
+ pmr735a_l7: l7 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ };
+ };
+};
+
&tlmm {
gpio-reserved-ranges = <13 4>;
};
--
2.38.1
next prev parent reply other threads:[~2022-11-15 15:29 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20221115152727.9736-1-konrad.dybcio@linaro.org>
2022-11-15 15:27 ` [PATCH v3 1/9] dt-bindings: arm-smmu: Allow 3 power domains on SM6375 MMU500 Konrad Dybcio
2022-11-15 15:52 ` Krzysztof Kozlowski
2022-11-18 13:38 ` Will Deacon
2022-12-05 20:56 ` Bjorn Andersson
2022-12-06 9:56 ` Will Deacon
2022-11-15 15:27 ` [PATCH v3 2/9] arm64: dts: qcom: pmk8350: Allow specifying arbitrary SID Konrad Dybcio
2022-11-15 15:27 ` [PATCH v3 3/9] arm64: dts: qcom: sm6375: Add GPI DMA nodes Konrad Dybcio
2022-11-15 15:27 ` [PATCH v3 4/9] arm64: dts: qcom: sm6375: Add pin configs for some QUP configurations Konrad Dybcio
2022-11-15 15:27 ` [PATCH v3 5/9] arm64: dts: qcom: sm6375: Add QUPs and corresponding SPI/I2C hosts Konrad Dybcio
2022-11-15 15:27 ` [PATCH v3 6/9] arm64: dts: qcom: sm6375-pdx225: Enable QUPs & GPI DMA Konrad Dybcio
2022-11-15 15:27 ` [PATCH v3 7/9] arm64: dts: qcom: sm6375-pdx225: Add PMIC peripherals Konrad Dybcio
2022-11-15 15:27 ` Konrad Dybcio [this message]
2022-11-15 15:27 ` [PATCH v3 9/9] arm64: dts: qcom: sm6375-pdx225: Configure Samsung touchscreen Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221115152727.9736-9-konrad.dybcio@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox