public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH] arm64: dts: rockchip: Add RTC support for RK3588
@ 2023-04-04 11:58 Shreeya Patel
  2023-04-04 12:03 ` Christopher Obbard
  0 siblings, 1 reply; 2+ messages in thread
From: Shreeya Patel @ 2023-04-04 11:58 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, heiko
  Cc: devicetree, linux-arm-kernel, linux-rockchip, linux-kernel,
	kernel, Shreeya Patel

Add DT node to enable RTC support on RK3588 board.

Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
---
 .../boot/dts/rockchip/rk3588-rock-5b.dts      | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 95805cb0adfa..a32bfa8d914a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -27,6 +27,31 @@ vcc5v0_sys: vcc5v0-sys-regulator {
 	};
 };
 
+&i2c6 {
+	status = "okay";
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+	};
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
 &sdhci {
 	bus-width = <8>;
 	no-sdio;
@@ -42,3 +67,5 @@ &uart2 {
 	pinctrl-0 = <&uart2m0_xfer>;
 	status = "okay";
 };
+
+
-- 
2.30.2


^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2023-04-04 12:09 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-04-04 11:58 [PATCH] arm64: dts: rockchip: Add RTC support for RK3588 Shreeya Patel
2023-04-04 12:03 ` Christopher Obbard

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox