Re: [PATCH net-next v2 2/3] dt-bindings: mscc: Add RGMII RX and TX delay tuning

[Vladimir Oltean <vladimir.oltean@nxp.com>]

On Wed, Apr 26, 2023 at 04:13:12PM +0530, Harini Katakam wrote:
> From: Harini Katakam <harini.katakam@xilinx.com>
> 
> Add optional properties to tune RGMII RX and TX delay. The current
> default value in the Linux driver, when the phy-mode is rgmii-id,
> is 2ns for both. These properties take priority if specified.
> 
> Signed-off-by: Harini Katakam <harini.katakam@amd.com>
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
> v2:
> - Updated DT binding description and commit for optional delay tuning
> to be clearer on the precedence
> - Updated dt property name to include vendor instead of phy device name
> 
>  Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
> index 0a3647fe331b..2b779bc3096b 100644
> --- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
> +++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt
> @@ -33,6 +33,8 @@ Optional properties:
>  			  VSC8531_DUPLEX_COLLISION (8).
>  - load-save-gpios	: GPIO used for the load/save operation of the PTP
>  			  hardware clock (PHC).
> +- mscc,rx-delay		: RGMII RX delay. Allowed values are 0.2 - 3.4 ns.
> +- mscc,tx-delay		: RGMII TX delay. Allowed values are 0.2 - 3.4 ns.

We have rx-internal-delay-ps and tx-internal-delay-ps in the common
ethernet-phy.yaml, there is no need for a custom property.