[PATCH V2 0/4] Add Video Clock Controller driver for SM8550

[PATCH V2 0/4] Add Video Clock Controller driver for SM8550

[Jagadeesh Kona]

Add bindings, driver and DT node for video clock controller on SM8550.
Also, add support to configure PLL_TEST_CTL_U2 register for ole pll.

Depends on [1] for SM8450 videocc YAML file
[1] https://patchwork.kernel.org/project/linux-clk/list/?series=750683

Jagadeesh Kona (4):
  clk: qcom: clk-alpha-pll: Add support to configure PLL_TEST_CTL_U2
  dt-bindings: clock: qcom: Add SM8550 video clock controller
  clk: qcom: videocc-sm8550: Add video clock controller driver for
    SM8550
  arm64: dts: qcom: sm8550: Add video clock controller

 .../bindings/clock/qcom,sm8450-videocc.yaml   |   4 +-
 arch/arm64/boot/dts/qcom/sm8550.dtsi          |  13 +
 drivers/clk/qcom/Kconfig                      |  10 +
 drivers/clk/qcom/Makefile                     |   1 +
 drivers/clk/qcom/clk-alpha-pll.c              |   2 +
 drivers/clk/qcom/clk-alpha-pll.h              |   1 +
 drivers/clk/qcom/videocc-sm8550.c             | 470 ++++++++++++++++++
 7 files changed, 500 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/qcom/videocc-sm8550.c

-- 
2.40.1

[PATCH V2 1/4] clk: qcom: clk-alpha-pll: Add support to configure PLL_TEST_CTL_U2

[Jagadeesh Kona]

The lucid ole pll reuses lucid evo ops but it has an additional test
control register which is required to be programmed, add support to
program the same.

Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
---
Changes since V1:
 - Removed redefining ole ops same as evo ops

 drivers/clk/qcom/clk-alpha-pll.c | 2 ++
 drivers/clk/qcom/clk-alpha-pll.h | 1 +
 2 files changed, 3 insertions(+)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index b9f6535a7ba7..f81c7c561352 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -55,6 +55,7 @@
 #define PLL_TEST_CTL(p)		((p)->offset + (p)->regs[PLL_OFF_TEST_CTL])
 #define PLL_TEST_CTL_U(p)	((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U])
 #define PLL_TEST_CTL_U1(p)     ((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U1])
+#define PLL_TEST_CTL_U2(p)     ((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U2])
 #define PLL_STATUS(p)		((p)->offset + (p)->regs[PLL_OFF_STATUS])
 #define PLL_OPMODE(p)		((p)->offset + (p)->regs[PLL_OFF_OPMODE])
 #define PLL_FRAC(p)		((p)->offset + (p)->regs[PLL_OFF_FRAC])
@@ -2096,6 +2097,7 @@ void clk_lucid_evo_pll_configure(struct clk_alpha_pll *pll, struct regmap *regma
 	clk_alpha_pll_write_config(regmap, PLL_TEST_CTL(pll), config->test_ctl_val);
 	clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U(pll), config->test_ctl_hi_val);
 	clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U1(pll), config->test_ctl_hi1_val);
+	clk_alpha_pll_write_config(regmap, PLL_TEST_CTL_U2(pll), config->test_ctl_hi2_val);
 
 	/* Disable PLL output */
 	regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index d07b17186b90..6ff0d08eb938 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -125,6 +125,7 @@ struct alpha_pll_config {
 	u32 test_ctl_val;
 	u32 test_ctl_hi_val;
 	u32 test_ctl_hi1_val;
+	u32 test_ctl_hi2_val;
 	u32 main_output_mask;
 	u32 aux_output_mask;
 	u32 aux2_output_mask;
-- 
2.40.1

[PATCH V2 2/4] dt-bindings: clock: qcom: Add SM8550 video clock controller

[Jagadeesh Kona]

Add compatible string for SM8550 video clock controller.

Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
---
Changes since V1:
 - Reused SM8450 videocc YAML for SM8550
 - Reusing SM8450 videocc bindings header file for SM8550

 .../devicetree/bindings/clock/qcom,sm8450-videocc.yaml        | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
index fe1fda77b835..f1c6dd50f184 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml
@@ -17,7 +17,9 @@ description: |
 
 properties:
   compatible:
-    const: qcom,sm8450-videocc
+    enum:
+      - qcom,sm8450-videocc
+      - qcom,sm8550-videocc
 
   reg:
     maxItems: 1
-- 
2.40.1

[PATCH V2 3/4] clk: qcom: videocc-sm8550: Add video clock controller driver for SM8550

[Jagadeesh Kona]

Add support for the video clock controller for video clients to be able
to request for videocc clocks on SM8550 platform.

Co-developed-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
---
Changes since V1:
 - No changes.

 drivers/clk/qcom/Kconfig          |  10 +
 drivers/clk/qcom/Makefile         |   1 +
 drivers/clk/qcom/videocc-sm8550.c | 470 ++++++++++++++++++++++++++++++
 3 files changed, 481 insertions(+)
 create mode 100644 drivers/clk/qcom/videocc-sm8550.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 927aa5983464..5b67f86bb93b 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -925,6 +925,16 @@ config SM_VIDEOCC_8250
 	  Say Y if you want to support video devices and functionality such as
 	  video encode and decode.
 
+config SM_VIDEOCC_8550
+	tristate "SM8550 Video Clock Controller"
+	select SM_GCC_8550
+	select QCOM_GDSC
+	help
+	  Support for the video clock controller on Qualcomm Technologies, Inc.
+	  SM8550 devices.
+	  Say Y if you want to support video devices and functionality such as
+	  video encode/decode.
+
 config SPMI_PMIC_CLKDIV
 	tristate "SPMI PMIC clkdiv Support"
 	depends on SPMI || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 1960ad8e8713..c53d6dbe4972 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -128,6 +128,7 @@ obj-$(CONFIG_SM_TCSRCC_8550) += tcsrcc-sm8550.o
 obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
 obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
 obj-$(CONFIG_SM_VIDEOCC_8450) += videocc-sm8450.o
+obj-$(CONFIG_SM_VIDEOCC_8550) += videocc-sm8550.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
 obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
 obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/videocc-sm8550.c b/drivers/clk/qcom/videocc-sm8550.c
new file mode 100644
index 000000000000..e2400fe23e60
--- /dev/null
+++ b/drivers/clk/qcom/videocc-sm8550.c
@@ -0,0 +1,470 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,sm8450-videocc.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "common.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+	DT_BI_TCXO,
+};
+
+enum {
+	P_BI_TCXO,
+	P_VIDEO_CC_PLL0_OUT_MAIN,
+	P_VIDEO_CC_PLL1_OUT_MAIN,
+};
+
+static const struct pll_vco lucid_ole_vco[] = {
+	{ 249600000, 2300000000, 0 },
+};
+
+static const struct alpha_pll_config video_cc_pll0_config = {
+	/* .l includes RINGOSC_CAL_L_VAL, CAL_L_VAL, L_VAL fields */
+	.l = 0x44440025,
+	.alpha = 0x8000,
+	.config_ctl_val = 0x20485699,
+	.config_ctl_hi_val = 0x00182261,
+	.config_ctl_hi1_val = 0x82aa299c,
+	.test_ctl_val = 0x00000000,
+	.test_ctl_hi_val = 0x00000003,
+	.test_ctl_hi1_val = 0x00009000,
+	.test_ctl_hi2_val = 0x00000034,
+	.user_ctl_val = 0x00000000,
+	.user_ctl_hi_val = 0x00000005,
+};
+
+static struct clk_alpha_pll video_cc_pll0 = {
+	.offset = 0x0,
+	.vco_table = lucid_ole_vco,
+	.num_vco = ARRAY_SIZE(lucid_ole_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+	.clkr = {
+		.hw.init = &(const struct clk_init_data) {
+			.name = "video_cc_pll0",
+			.parent_data = &(const struct clk_parent_data) {
+				.index = DT_BI_TCXO,
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_lucid_evo_ops,
+		},
+	},
+};
+
+static const struct alpha_pll_config video_cc_pll1_config = {
+	/* .l includes RINGOSC_CAL_L_VAL, CAL_L_VAL, L_VAL fields */
+	.l = 0x44440036,
+	.alpha = 0xb000,
+	.config_ctl_val = 0x20485699,
+	.config_ctl_hi_val = 0x00182261,
+	.config_ctl_hi1_val = 0x82aa299c,
+	.test_ctl_val = 0x00000000,
+	.test_ctl_hi_val = 0x00000003,
+	.test_ctl_hi1_val = 0x00009000,
+	.test_ctl_hi2_val = 0x00000034,
+	.user_ctl_val = 0x00000000,
+	.user_ctl_hi_val = 0x00000005,
+};
+
+static struct clk_alpha_pll video_cc_pll1 = {
+	.offset = 0x1000,
+	.vco_table = lucid_ole_vco,
+	.num_vco = ARRAY_SIZE(lucid_ole_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID_OLE],
+	.clkr = {
+		.hw.init = &(const struct clk_init_data) {
+			.name = "video_cc_pll1",
+			.parent_data = &(const struct clk_parent_data) {
+				.index = DT_BI_TCXO,
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_lucid_evo_ops,
+		},
+	},
+};
+
+static const struct parent_map video_cc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_VIDEO_CC_PLL0_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_0[] = {
+	{ .index = DT_BI_TCXO },
+	{ .hw = &video_cc_pll0.clkr.hw },
+};
+
+static const struct parent_map video_cc_parent_map_1[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_VIDEO_CC_PLL1_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_1[] = {
+	{ .index = DT_BI_TCXO },
+	{ .hw = &video_cc_pll1.clkr.hw },
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs0_clk_src[] = {
+	F(720000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+	F(1014000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+	F(1098000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+	F(1332000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+	F(1600000000, P_VIDEO_CC_PLL0_OUT_MAIN, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 video_cc_mvs0_clk_src = {
+	.cmd_rcgr = 0x8000,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = video_cc_parent_map_0,
+	.freq_tbl = ftbl_video_cc_mvs0_clk_src,
+	.clkr.hw.init = &(const struct clk_init_data) {
+		.name = "video_cc_mvs0_clk_src",
+		.parent_data = video_cc_parent_data_0,
+		.num_parents = ARRAY_SIZE(video_cc_parent_data_0),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_video_cc_mvs1_clk_src[] = {
+	F(1050000000, P_VIDEO_CC_PLL1_OUT_MAIN, 1, 0, 0),
+	F(1350000000, P_VIDEO_CC_PLL1_OUT_MAIN, 1, 0, 0),
+	F(1500000000, P_VIDEO_CC_PLL1_OUT_MAIN, 1, 0, 0),
+	F(1650000000, P_VIDEO_CC_PLL1_OUT_MAIN, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 video_cc_mvs1_clk_src = {
+	.cmd_rcgr = 0x8018,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = video_cc_parent_map_1,
+	.freq_tbl = ftbl_video_cc_mvs1_clk_src,
+	.clkr.hw.init = &(const struct clk_init_data) {
+		.name = "video_cc_mvs1_clk_src",
+		.parent_data = video_cc_parent_data_1,
+		.num_parents = ARRAY_SIZE(video_cc_parent_data_1),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static struct clk_regmap_div video_cc_mvs0_div_clk_src = {
+	.reg = 0x80c4,
+	.shift = 0,
+	.width = 4,
+	.clkr.hw.init = &(const struct clk_init_data) {
+		.name = "video_cc_mvs0_div_clk_src",
+		.parent_hws = (const struct clk_hw*[]) {
+			&video_cc_mvs0_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_regmap_div video_cc_mvs0c_div2_div_clk_src = {
+	.reg = 0x8070,
+	.shift = 0,
+	.width = 4,
+	.clkr.hw.init = &(const struct clk_init_data) {
+		.name = "video_cc_mvs0c_div2_div_clk_src",
+		.parent_hws = (const struct clk_hw*[]) {
+			&video_cc_mvs0_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_regmap_div video_cc_mvs1_div_clk_src = {
+	.reg = 0x80ec,
+	.shift = 0,
+	.width = 4,
+	.clkr.hw.init = &(const struct clk_init_data) {
+		.name = "video_cc_mvs1_div_clk_src",
+		.parent_hws = (const struct clk_hw*[]) {
+			&video_cc_mvs1_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_regmap_div video_cc_mvs1c_div2_div_clk_src = {
+	.reg = 0x809c,
+	.shift = 0,
+	.width = 4,
+	.clkr.hw.init = &(const struct clk_init_data) {
+		.name = "video_cc_mvs1c_div2_div_clk_src",
+		.parent_hws = (const struct clk_hw*[]) {
+			&video_cc_mvs1_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_branch video_cc_mvs0_clk = {
+	.halt_reg = 0x80b8,
+	.halt_check = BRANCH_HALT_SKIP,
+	.hwcg_reg = 0x80b8,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x80b8,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "video_cc_mvs0_clk",
+			.parent_hws = (const struct clk_hw*[]) {
+				&video_cc_mvs0_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvs0c_clk = {
+	.halt_reg = 0x8064,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8064,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "video_cc_mvs0c_clk",
+			.parent_hws = (const struct clk_hw*[]) {
+				&video_cc_mvs0c_div2_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvs1_clk = {
+	.halt_reg = 0x80e0,
+	.halt_check = BRANCH_HALT_SKIP,
+	.hwcg_reg = 0x80e0,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x80e0,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "video_cc_mvs1_clk",
+			.parent_hws = (const struct clk_hw*[]) {
+				&video_cc_mvs1_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvs1c_clk = {
+	.halt_reg = 0x8090,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8090,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "video_cc_mvs1c_clk",
+			.parent_hws = (const struct clk_hw*[]) {
+				&video_cc_mvs1c_div2_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc video_cc_mvs0c_gdsc = {
+	.gdscr = 0x804c,
+	.en_rest_wait_val = 0x2,
+	.en_few_wait_val = 0x2,
+	.clk_dis_wait_val = 0x6,
+	.pd = {
+		.name = "video_cc_mvs0c_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc video_cc_mvs0_gdsc = {
+	.gdscr = 0x80a4,
+	.en_rest_wait_val = 0x2,
+	.en_few_wait_val = 0x2,
+	.clk_dis_wait_val = 0x6,
+	.pd = {
+		.name = "video_cc_mvs0_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.parent = &video_cc_mvs0c_gdsc.pd,
+	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL,
+};
+
+static struct gdsc video_cc_mvs1c_gdsc = {
+	.gdscr = 0x8078,
+	.en_rest_wait_val = 0x2,
+	.en_few_wait_val = 0x2,
+	.clk_dis_wait_val = 0x6,
+	.pd = {
+		.name = "video_cc_mvs1c_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+};
+
+static struct gdsc video_cc_mvs1_gdsc = {
+	.gdscr = 0x80cc,
+	.en_rest_wait_val = 0x2,
+	.en_few_wait_val = 0x2,
+	.clk_dis_wait_val = 0x6,
+	.pd = {
+		.name = "video_cc_mvs1_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.parent = &video_cc_mvs1c_gdsc.pd,
+	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE | HW_CTRL,
+};
+
+static struct clk_regmap *video_cc_sm8550_clocks[] = {
+	[VIDEO_CC_MVS0_CLK] = &video_cc_mvs0_clk.clkr,
+	[VIDEO_CC_MVS0_CLK_SRC] = &video_cc_mvs0_clk_src.clkr,
+	[VIDEO_CC_MVS0_DIV_CLK_SRC] = &video_cc_mvs0_div_clk_src.clkr,
+	[VIDEO_CC_MVS0C_CLK] = &video_cc_mvs0c_clk.clkr,
+	[VIDEO_CC_MVS0C_DIV2_DIV_CLK_SRC] = &video_cc_mvs0c_div2_div_clk_src.clkr,
+	[VIDEO_CC_MVS1_CLK] = &video_cc_mvs1_clk.clkr,
+	[VIDEO_CC_MVS1_CLK_SRC] = &video_cc_mvs1_clk_src.clkr,
+	[VIDEO_CC_MVS1_DIV_CLK_SRC] = &video_cc_mvs1_div_clk_src.clkr,
+	[VIDEO_CC_MVS1C_CLK] = &video_cc_mvs1c_clk.clkr,
+	[VIDEO_CC_MVS1C_DIV2_DIV_CLK_SRC] = &video_cc_mvs1c_div2_div_clk_src.clkr,
+	[VIDEO_CC_PLL0] = &video_cc_pll0.clkr,
+	[VIDEO_CC_PLL1] = &video_cc_pll1.clkr,
+};
+
+static struct gdsc *video_cc_sm8550_gdscs[] = {
+	[VIDEO_CC_MVS0C_GDSC] = &video_cc_mvs0c_gdsc,
+	[VIDEO_CC_MVS0_GDSC] = &video_cc_mvs0_gdsc,
+	[VIDEO_CC_MVS1C_GDSC] = &video_cc_mvs1c_gdsc,
+	[VIDEO_CC_MVS1_GDSC] = &video_cc_mvs1_gdsc,
+};
+
+static const struct qcom_reset_map video_cc_sm8550_resets[] = {
+	[CVP_VIDEO_CC_INTERFACE_BCR] = { 0x80f0 },
+	[CVP_VIDEO_CC_MVS0_BCR] = { 0x80a0 },
+	[CVP_VIDEO_CC_MVS0C_BCR] = { 0x8048 },
+	[CVP_VIDEO_CC_MVS1_BCR] = { 0x80c8 },
+	[CVP_VIDEO_CC_MVS1C_BCR] = { 0x8074 },
+	[VIDEO_CC_MVS0C_CLK_ARES] = { 0x8064, 2 },
+	[VIDEO_CC_MVS1C_CLK_ARES] = { 0x8090, 2 },
+};
+
+static const struct regmap_config video_cc_sm8550_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x9f4c,
+	.fast_io = true,
+};
+
+static struct qcom_cc_desc video_cc_sm8550_desc = {
+	.config = &video_cc_sm8550_regmap_config,
+	.clks = video_cc_sm8550_clocks,
+	.num_clks = ARRAY_SIZE(video_cc_sm8550_clocks),
+	.resets = video_cc_sm8550_resets,
+	.num_resets = ARRAY_SIZE(video_cc_sm8550_resets),
+	.gdscs = video_cc_sm8550_gdscs,
+	.num_gdscs = ARRAY_SIZE(video_cc_sm8550_gdscs),
+};
+
+static const struct of_device_id video_cc_sm8550_match_table[] = {
+	{ .compatible = "qcom,sm8550-videocc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, video_cc_sm8550_match_table);
+
+static int video_cc_sm8550_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+	int ret;
+
+	ret = devm_pm_runtime_enable(&pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(&pdev->dev);
+	if (ret)
+		return ret;
+
+	regmap = qcom_cc_map(pdev, &video_cc_sm8550_desc);
+	if (IS_ERR(regmap)) {
+		pm_runtime_put(&pdev->dev);
+		return PTR_ERR(regmap);
+	}
+
+	clk_lucid_evo_pll_configure(&video_cc_pll0, regmap, &video_cc_pll0_config);
+	clk_lucid_evo_pll_configure(&video_cc_pll1, regmap, &video_cc_pll1_config);
+
+	/*
+	 * Keep clocks always enabled:
+	 *	video_cc_ahb_clk
+	 *	video_cc_sleep_clk
+	 *	video_cc_xo_clk
+	 */
+	regmap_update_bits(regmap, 0x80f4, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x8140, BIT(0), BIT(0));
+	regmap_update_bits(regmap, 0x8124, BIT(0), BIT(0));
+
+	ret = qcom_cc_really_probe(pdev, &video_cc_sm8550_desc, regmap);
+
+	pm_runtime_put(&pdev->dev);
+
+	return ret;
+}
+
+static struct platform_driver video_cc_sm8550_driver = {
+	.probe = video_cc_sm8550_probe,
+	.driver = {
+		.name = "video_cc-sm8550",
+		.of_match_table = video_cc_sm8550_match_table,
+	},
+};
+
+static int __init video_cc_sm8550_init(void)
+{
+	return platform_driver_register(&video_cc_sm8550_driver);
+}
+subsys_initcall(video_cc_sm8550_init);
+
+static void __exit video_cc_sm8550_exit(void)
+{
+	platform_driver_unregister(&video_cc_sm8550_driver);
+}
+module_exit(video_cc_sm8550_exit);
+
+MODULE_DESCRIPTION("QTI VIDEOCC SM8550 Driver");
+MODULE_LICENSE("GPL");
-- 
2.40.1

[PATCH V2 4/4] arm64: dts: qcom: sm8550: Add video clock controller

[Jagadeesh Kona]

Add device node for video clock controller on Qualcomm SM8550 platform.

Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
---
Changes since V1:
 - Sorted DT node by unit address
 - Reused SM8450 videocc header file for SM8550

 arch/arm64/boot/dts/qcom/sm8550.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 6e9bad8f6f33..bef33b253813 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8450-videocc.h>
 #include <dt-bindings/clock/qcom,sm8550-gcc.h>
 #include <dt-bindings/clock/qcom,sm8550-tcsr.h>
 #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
@@ -2385,6 +2386,18 @@ opp-202000000 {
 			};
 		};
 
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,sm8550-videocc";
+			reg = <0 0x0aaf0000 0 0x10000>;
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_VIDEO_AHB_CLK>;
+			power-domains = <&rpmhpd SM8550_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sm8550-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
-- 
2.40.1

Re: [PATCH V2 2/4] dt-bindings: clock: qcom: Add SM8550 video clock controller

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 261 bytes --]

On Wed, May 24, 2023 at 08:22:01PM +0530, Jagadeesh Kona wrote:
> Add compatible string for SM8550 video clock controller.
> 
> Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>

Thanks,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: (subset) [PATCH V2 0/4] Add Video Clock Controller driver for SM8550

[Bjorn Andersson]

On Wed, 24 May 2023 20:21:59 +0530, Jagadeesh Kona wrote:
> Add bindings, driver and DT node for video clock controller on SM8550.
> Also, add support to configure PLL_TEST_CTL_U2 register for ole pll.
> 
> Depends on [1] for SM8450 videocc YAML file
> [1] https://patchwork.kernel.org/project/linux-clk/list/?series=750683
> 
> Jagadeesh Kona (4):
>   clk: qcom: clk-alpha-pll: Add support to configure PLL_TEST_CTL_U2
>   dt-bindings: clock: qcom: Add SM8550 video clock controller
>   clk: qcom: videocc-sm8550: Add video clock controller driver for
>     SM8550
>   arm64: dts: qcom: sm8550: Add video clock controller
> 
> [...]

Applied, thanks!

[4/4] arm64: dts: qcom: sm8550: Add video clock controller
      commit: 22ff170d4551756e3e4ef57253c43e8c3fffefed

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>