public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
To: <tudor.ambarus@linaro.org>, <pratyush@kernel.org>,
	<miquel.raynal@bootlin.com>, <richard@nod.at>, <vigneshr@ti.com>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<conor+dt@kernel.org>
Cc: <git@amd.com>, <michael@walle.cc>,
	<linux-mtd@lists.infradead.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <amitrkcian2002@gmail.com>,
	Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Subject: [PATCH 2/2] mtd: spi-nor: Avoid setting SRWD bit in SR if WP signal not connected
Date: Thu, 15 Jun 2023 16:46:49 +0530	[thread overview]
Message-ID: <20230615111649.36344-3-amit.kumar-mahapatra@amd.com> (raw)
In-Reply-To: <20230615111649.36344-1-amit.kumar-mahapatra@amd.com>

Setting the status register write disable (SRWD) bit in the status
register (SR) with WP signal of the flash not connected will configure the
SR permanently as read-only. If WP signal is not connected, avoid setting
SRWD bit while writing the SR during flash protection.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
---
 drivers/mtd/spi-nor/core.c | 3 +++
 drivers/mtd/spi-nor/core.h | 1 +
 drivers/mtd/spi-nor/swp.c  | 5 +++--
 3 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 0bb0ad14a2fc..81b57c51f41c 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2864,6 +2864,9 @@ static void spi_nor_init_flags(struct spi_nor *nor)
 	if (flags & NO_CHIP_ERASE)
 		nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
 
+	if (of_property_read_bool(np, "broken-wp"))
+		nor->flags |= SNOR_F_BROKEN_WP;
+
 	if (flags & SPI_NOR_RWW && nor->info->n_banks > 1 &&
 	    !nor->controller_ops)
 		nor->flags |= SNOR_F_RWW;
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 4fb5ff09c63a..6ac932eba913 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -132,6 +132,7 @@ enum spi_nor_option_flags {
 	SNOR_F_SWP_IS_VOLATILE	= BIT(13),
 	SNOR_F_RWW		= BIT(14),
 	SNOR_F_ECC		= BIT(15),
+	SNOR_F_BROKEN_WP	= BIT(16),
 };
 
 struct spi_nor_read_command {
diff --git a/drivers/mtd/spi-nor/swp.c b/drivers/mtd/spi-nor/swp.c
index 0ba716e84377..074f3bce2034 100644
--- a/drivers/mtd/spi-nor/swp.c
+++ b/drivers/mtd/spi-nor/swp.c
@@ -214,8 +214,9 @@ static int spi_nor_sr_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
 
 	status_new = (status_old & ~mask & ~tb_mask) | val;
 
-	/* Disallow further writes if WP pin is asserted */
-	status_new |= SR_SRWD;
+	/* Disallow further writes if WP pin is connected */
+	if (!(nor->flags & SNOR_F_BROKEN_WP))
+		status_new |= SR_SRWD;
 
 	if (!use_top)
 		status_new |= tb_mask;
-- 
2.17.1


  parent reply	other threads:[~2023-06-15 11:17 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-15 11:16 [PATCH 0/2] mtd: spi-nor: Avoid setting SRWD bit in SR Amit Kumar Mahapatra
2023-06-15 11:16 ` [PATCH 1/2] dt-bindings: mtd: jedec, spi-nor: Add DT property to avoid setting SRWD bit in status register Amit Kumar Mahapatra
2023-06-15 12:08   ` Michael Walle
2023-06-15 19:13   ` Conor Dooley
2023-06-15 11:16 ` Amit Kumar Mahapatra [this message]
2023-06-15 12:18   ` [PATCH 2/2] mtd: spi-nor: Avoid setting SRWD bit in SR if WP signal not connected Michael Walle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230615111649.36344-3-amit.kumar-mahapatra@amd.com \
    --to=amit.kumar-mahapatra@amd.com \
    --cc=amitrkcian2002@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=git@amd.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=michael@walle.cc \
    --cc=miquel.raynal@bootlin.com \
    --cc=pratyush@kernel.org \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=tudor.ambarus@linaro.org \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox