From: =Xianwei Zhao <xianwei.zhao@amlogic.com>
To: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-amlogic@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Xianwei Zhao <xianwei.zhao@amlogic.com>
Subject: [PATCH 2/3] soc: c3: Add support for power domains controller
Date: Mon, 3 Jul 2023 17:31:41 +0800 [thread overview]
Message-ID: <20230703093142.2028500-3-xianwei.zhao@amlogic.com> (raw)
In-Reply-To: <20230703093142.2028500-1-xianwei.zhao@amlogic.com>
From: Xianwei Zhao <xianwei.zhao@amlogic.com>
Add support for C3 Power controller. C3 power control
registers are in secure domain, and should be accessed by SMC.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
---
drivers/soc/amlogic/meson-secure-pwrc.c | 28 ++++++++++++++++++++++++-
1 file changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/amlogic/meson-secure-pwrc.c b/drivers/soc/amlogic/meson-secure-pwrc.c
index 25b4b71df9b8..39ccc8f2e630 100644
--- a/drivers/soc/amlogic/meson-secure-pwrc.c
+++ b/drivers/soc/amlogic/meson-secure-pwrc.c
@@ -12,6 +12,7 @@
#include <linux/pm_domain.h>
#include <dt-bindings/power/meson-a1-power.h>
#include <dt-bindings/power/meson-s4-power.h>
+#include <dt-bindings/power/amlogic-c3-power.h>
#include <linux/arm-smccc.h>
#include <linux/firmware/meson/meson_sm.h>
#include <linux/module.h>
@@ -132,6 +133,22 @@ static struct meson_secure_pwrc_domain_desc s4_pwrc_domains[] = {
SEC_PD(S4_AUDIO, 0),
};
+static struct meson_secure_pwrc_domain_desc c3_pwrc_domains[] = {
+ SEC_PD(C3_NNA, 0),
+ SEC_PD(C3_AUDIO, GENPD_FLAG_ALWAYS_ON),
+ SEC_PD(C3_SDIOA, GENPD_FLAG_ALWAYS_ON),
+ SEC_PD(C3_EMMC, GENPD_FLAG_ALWAYS_ON),
+ SEC_PD(C3_USB_COMB, GENPD_FLAG_ALWAYS_ON),
+ SEC_PD(C3_SDCARD, GENPD_FLAG_ALWAYS_ON),
+ SEC_PD(C3_ETH, GENPD_FLAG_ALWAYS_ON),
+ SEC_PD(C3_GE2D, GENPD_FLAG_ALWAYS_ON),
+ SEC_PD(C3_CVE, GENPD_FLAG_ALWAYS_ON),
+ SEC_PD(C3_GDC_WRAP, GENPD_FLAG_ALWAYS_ON),
+ SEC_PD(C3_ISP_TOP, GENPD_FLAG_ALWAYS_ON),
+ SEC_PD(C3_MIPI_ISP_WRAP, GENPD_FLAG_ALWAYS_ON),
+ SEC_PD(C3_VCODEC, 0),
+};
+
static int meson_secure_pwrc_probe(struct platform_device *pdev)
{
int i;
@@ -179,7 +196,7 @@ static int meson_secure_pwrc_probe(struct platform_device *pdev)
for (i = 0 ; i < match->count ; ++i) {
struct meson_secure_pwrc_domain *dom = &pwrc->domains[i];
- if (!match->domains[i].index)
+ if (!match->domains[i].name)
continue;
dom->pwrc = pwrc;
@@ -207,6 +224,11 @@ static struct meson_secure_pwrc_domain_data meson_secure_s4_pwrc_data = {
.count = ARRAY_SIZE(s4_pwrc_domains),
};
+static struct meson_secure_pwrc_domain_data amlogic_secure_c3_pwrc_data = {
+ .domains = c3_pwrc_domains,
+ .count = ARRAY_SIZE(c3_pwrc_domains),
+};
+
static const struct of_device_id meson_secure_pwrc_match_table[] = {
{
.compatible = "amlogic,meson-a1-pwrc",
@@ -216,6 +238,10 @@ static const struct of_device_id meson_secure_pwrc_match_table[] = {
.compatible = "amlogic,meson-s4-pwrc",
.data = &meson_secure_s4_pwrc_data,
},
+ {
+ .compatible = "amlogic,c3-pwrc",
+ .data = &amlogic_secure_c3_pwrc_data,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, meson_secure_pwrc_match_table);
--
2.37.1
next prev parent reply other threads:[~2023-07-03 9:33 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-03 9:31 [PATCH 0/3] Power: C3: add power domain driver =Xianwei Zhao
2023-07-03 9:31 ` [PATCH 1/3] dt-bindings: power: add Amlogic C3 power domains =Xianwei Zhao
2023-07-03 13:12 ` Krzysztof Kozlowski
2023-07-04 2:09 ` Xianwei Zhao
2023-07-03 9:31 ` =Xianwei Zhao [this message]
2023-07-03 13:29 ` [PATCH 2/3] soc: c3: Add support for power domains controller Neil Armstrong
2023-07-03 19:37 ` Dmitry Rokosov
2023-07-04 2:43 ` Xianwei Zhao
2023-07-04 2:20 ` Xianwei Zhao
2023-07-03 9:31 ` [PATCH 3/3] arm64: dts: add support for C3 power domain controller =Xianwei Zhao
2023-07-03 13:12 ` Krzysztof Kozlowski
2023-07-04 2:23 ` Xianwei Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230703093142.2028500-3-xianwei.zhao@amlogic.com \
--to=xianwei.zhao@amlogic.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox