[PATCH v1 2/5] tty: serial: meson: redesign the module to platform_driver

[Dmitry Rokosov <ddrokosov@sberdevices.ru>]

Actually, the meson_uart module is already a platform_driver, but it is
currently registered manually and the uart core registration is run
outside the probe() scope, which results in some restrictions. For
instance, it is not possible to communicate with the OF subsystem
because it requires an initialized device object.

To address this issue, apply module_platform_driver() instead of direct
module init/exit routines. Additionally, move uart_register_driver() to
the driver probe(), and destroy manual console registration because it's
already run in the uart_register_driver() flow.

Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
---
 drivers/tty/serial/meson_uart.c | 46 +++++++--------------------------
 1 file changed, 10 insertions(+), 36 deletions(-)

diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 169f028956ae..87c0eb5f2dba 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -621,12 +621,6 @@ static struct console meson_serial_console = {
 	.data		= &meson_uart_driver,
 };
 
-static int __init meson_serial_console_init(void)
-{
-	register_console(&meson_serial_console);
-	return 0;
-}
-
 static void meson_serial_early_console_write(struct console *co,
 					     const char *s,
 					     u_int count)
@@ -652,9 +646,6 @@ OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart",
 
 #define MESON_SERIAL_CONSOLE	(&meson_serial_console)
 #else
-static int __init meson_serial_console_init(void) {
-	return 0;
-}
 #define MESON_SERIAL_CONSOLE	NULL
 #endif
 
@@ -738,6 +729,13 @@ static int meson_uart_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	if (!meson_uart_driver.state) {
+		ret = uart_register_driver(&meson_uart_driver);
+		if (ret)
+			return dev_err_probe(&pdev->dev, ret,
+				      "failed to register meson-uart driver\n");
+	}
+
 	port->iotype = UPIO_MEM;
 	port->mapbase = res_mem->start;
 	port->mapsize = resource_size(res_mem);
@@ -776,6 +774,8 @@ static int meson_uart_remove(struct platform_device *pdev)
 	uart_remove_one_port(&meson_uart_driver, port);
 	meson_ports[pdev->id] = NULL;
 
+	uart_unregister_driver(&meson_uart_driver);
+
 	return 0;
 }
 
@@ -809,33 +809,7 @@ static  struct platform_driver meson_uart_platform_driver = {
 	},
 };
 
-static int __init meson_uart_init(void)
-{
-	int ret;
-
-	ret = meson_serial_console_init();
-	if (ret)
-		return ret;
-	
-	ret = uart_register_driver(&meson_uart_driver);
-	if (ret)
-		return ret;
-
-	ret = platform_driver_register(&meson_uart_platform_driver);
-	if (ret)
-		uart_unregister_driver(&meson_uart_driver);
-
-	return ret;
-}
-
-static void __exit meson_uart_exit(void)
-{
-	platform_driver_unregister(&meson_uart_platform_driver);
-	uart_unregister_driver(&meson_uart_driver);
-}
-
-module_init(meson_uart_init);
-module_exit(meson_uart_exit);
+module_platform_driver(meson_uart_platform_driver);
 
 MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
 MODULE_DESCRIPTION("Amlogic Meson serial port driver");
-- 
2.36.0