* [PATCH v2] arm64: dts: ti: am62-phyboard-lyra: Add overlay to enable a GPIO fan
@ 2024-02-09 0:29 Nathan Morrisson
2024-02-09 5:26 ` Wadim Egorov
0 siblings, 1 reply; 2+ messages in thread
From: Nathan Morrisson @ 2024-02-09 0:29 UTC (permalink / raw)
To: nm, vigneshr, kristo, robh+dt, krzysztof.kozlowski+dt, conor+dt
Cc: devicetree, upstream, linux-kernel, linux-arm-kernel, w.egorov
The phyBOARD-Lyra has a GPIO fan header. This overlay enables the fan
header and sets the fan to turn on at 65C.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
---
v2:
- Change overlay name from k3-am62-... to k3-am62x-...
- Add compile time test
arch/arm64/boot/dts/ti/Makefile | 3 ++
.../ti/k3-am62x-phyboard-lyra-gpio-fan.dtso | 51 +++++++++++++++++++
2 files changed, 54 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 52c1dc910308..bfeb496d5039 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62x-phyboard-lyra-gpio-fan.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
# Boards with AM62Ax SoC
@@ -87,6 +88,8 @@ k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
k3-am625-beagleplay-csi2-ov5640.dtbo
k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \
k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
+k3-am625-phyboard-lyra-gpio-fan-dtbs := k3-am625-phyboard-lyra-rdk.dtb \
+ k3-am62x-phyboard-lyra-gpio-fan.dtbo
k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \
k3-am62x-sk-csi2-imx219.dtbo
k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
new file mode 100644
index 000000000000..9c05748bdd9d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2024 PHYTEC America LLC
+ * Author: Garrett Giordano <ggiordano@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+ fan: gpio-fan {
+ compatible = "gpio-fan";
+ gpio-fan,speed-map = <0 0 8600 1>;
+ gpios = <&main_gpio0 40 GPIO_ACTIVE_LOW>;
+ #cooling-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_fan_pins_default>;
+ status = "okay";
+ };
+};
+
+&main_pmx0 {
+ gpio_fan_pins_default: gpio-fan-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x0a4, PIN_OUTPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
+ >;
+ };
+};
+
+&thermal_zones {
+ main0_thermal: main0-thermal {
+ trips {
+ main0_thermal_trip0: main0-thermal-trip {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&main0_thermal_trip0>;
+ cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH v2] arm64: dts: ti: am62-phyboard-lyra: Add overlay to enable a GPIO fan
2024-02-09 0:29 [PATCH v2] arm64: dts: ti: am62-phyboard-lyra: Add overlay to enable a GPIO fan Nathan Morrisson
@ 2024-02-09 5:26 ` Wadim Egorov
0 siblings, 0 replies; 2+ messages in thread
From: Wadim Egorov @ 2024-02-09 5:26 UTC (permalink / raw)
To: Nathan Morrisson, nm, vigneshr, kristo, robh+dt,
krzysztof.kozlowski+dt, conor+dt
Cc: devicetree, upstream, linux-kernel, linux-arm-kernel
Hi Nathan,
Am 09.02.24 um 01:29 schrieb Nathan Morrisson:
> The phyBOARD-Lyra has a GPIO fan header. This overlay enables the fan
> header and sets the fan to turn on at 65C.
>
> Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
> ---
> v2:
> - Change overlay name from k3-am62-... to k3-am62x-...
> - Add compile time test
>
> arch/arm64/boot/dts/ti/Makefile | 3 ++
> .../ti/k3-am62x-phyboard-lyra-gpio-fan.dtso | 51 +++++++++++++++++++
> 2 files changed, 54 insertions(+)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
>
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index 52c1dc910308..bfeb496d5039 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
> +dtb-$(CONFIG_ARCH_K3) += k3-am62x-phyboard-lyra-gpio-fan.dtbo
> dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
>
> # Boards with AM62Ax SoC
> @@ -87,6 +88,8 @@ k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
> k3-am625-beagleplay-csi2-ov5640.dtbo
> k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \
> k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
> +k3-am625-phyboard-lyra-gpio-fan-dtbs := k3-am625-phyboard-lyra-rdk.dtb \
> + k3-am62x-phyboard-lyra-gpio-fan.dtbo
> k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \
> k3-am62x-sk-csi2-imx219.dtbo
> k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \
> diff --git a/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
> new file mode 100644
> index 000000000000..9c05748bdd9d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra-gpio-fan.dtso
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: GPL-2.0-only OR MIT
> +/*
> + * Copyright (C) 2024 PHYTEC America LLC
> + * Author: Garrett Giordano <ggiordano@phytec.com>
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/thermal/thermal.h>
> +#include "k3-pinctrl.h"
> +
> +&{/} {
> + fan: gpio-fan {
> + compatible = "gpio-fan";
> + gpio-fan,speed-map = <0 0 8600 1>;
> + gpios = <&main_gpio0 40 GPIO_ACTIVE_LOW>;
> + #cooling-cells = <2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_fan_pins_default>;
> + status = "okay";
There is no need to set the status. If no status is present, it also
indicates that the node is activated.
With this change,
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
> + };
> +};
> +
> +&main_pmx0 {
> + gpio_fan_pins_default: gpio-fan-default-pins {
> + pinctrl-single,pins = <
> + AM62X_IOPAD(0x0a4, PIN_OUTPUT, 7) /* (M22) GPMC0_DIR.GPIO0_40 */
> + >;
> + };
> +};
> +
> +&thermal_zones {
> + main0_thermal: main0-thermal {
> + trips {
> + main0_thermal_trip0: main0-thermal-trip {
> + temperature = <65000>; /* millicelsius */
> + hysteresis = <2000>; /* millicelsius */
> + type = "active";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&main0_thermal_trip0>;
> + cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> +};
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-02-09 5:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-02-09 0:29 [PATCH v2] arm64: dts: ti: am62-phyboard-lyra: Add overlay to enable a GPIO fan Nathan Morrisson
2024-02-09 5:26 ` Wadim Egorov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox