From: Manorit Chawdhry <m-chawdhry@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Udit Kumar <u-kumar1@ti.com>,
Neha Malcom Francis <n-francis@ti.com>,
Aniket Limaye <a-limaye@ti.com>,
Manorit Chawdhry <m-chawdhry@ti.com>
Subject: [PATCH v3 9/9] arm64: dts: ti: Add support for J742S2 EVM board
Date: Wed, 31 Jul 2024 22:40:35 +0530 [thread overview]
Message-ID: <20240731-b4-upstream-j742s2-v3-9-da7fe3aa9e90@ti.com> (raw)
In-Reply-To: <20240731-b4-upstream-j742s2-v3-0-da7fe3aa9e90@ti.com>
J742S2 EVM board is designed for TI J742S2 SoC. It supports the following
interfaces:
* 16 GB DDR4 RAM
* x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode
* x1 Input Audio Jack, x1 Output Audio Jack
* x1 USB2.0 Hub with two Type A host and x1 USB 3.1 Type-C Port
* x1 4L PCIe connector
* x1 UHS-1 capable micro-SD card slot
* 512 Mbit OSPI flash, 1 Gbit Octal NAND flash, 512 Mbit QSPI flash,
UFS flash.
* x6 UART through UART-USB bridge
* XDS110 for onboard JTAG debug using USB
* Temperature sensors, user push buttons and LEDs
* x1 GESI expander, x2 Display connector
* x1 15-pin CSI header
* x6 MCAN instances
Link: https://www.ti.com/lit/ug/sprujd8/sprujd8.pdf (EVM user guide)
Link: https://www.ti.com/lit/zip/SPAC001 (Schematics)
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
---
arch/arm64/boot/dts/ti/Makefile | 4 ++++
arch/arm64/boot/dts/ti/k3-j742s2-evm.dts | 26 ++++++++++++++++++++++
.../boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi | 3 ++-
3 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index e20b27ddf901..1bf645726a10 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -119,6 +119,9 @@ dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-pcie0-pcie1-ep.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-quad-port-eth-exp1.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm-usxgmii-exp1-exp2.dtbo
+# Boards with J742S2 SoC
+dtb-$(CONFIG_ARCH_K3) += k3-j742s2-evm.dtb
+
# Build time test only, enabled by CONFIG_OF_ALL_DTBS
k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
k3-am625-beagleplay-csi2-ov5640.dtbo
@@ -240,3 +243,4 @@ DTC_FLAGS_k3-j721e-common-proc-board += -@
DTC_FLAGS_k3-j721e-sk += -@
DTC_FLAGS_k3-j721s2-common-proc-board += -@
DTC_FLAGS_k3-j784s4-evm += -@
+DTC_FLAGS_k3-j742s2-evm += -@
diff --git a/arch/arm64/boot/dts/ti/k3-j742s2-evm.dts b/arch/arm64/boot/dts/ti/k3-j742s2-evm.dts
new file mode 100644
index 000000000000..ac683bcbfe97
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j742s2-evm.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * EVM Board Schematics: https://www.ti.com/lit/zip/SPAC001
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-j742s2.dtsi"
+#include "k3-j784s4-j742s2-evm-common.dtsi"
+
+/ {
+ model = "Texas Instruments J742S2 EVM";
+ compatible = "ti,j742s2-evm", "ti,j742s2";
+
+ memory@80000000 {
+ device_type = "memory";
+ bootph-all;
+ /* 16G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+ <0x00000008 0x80000000 0x00000003 0x80000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
index 068ceed4ea15..a7bb1857b4e8 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
@@ -2,7 +2,8 @@
/*
* Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
*
- * EVM Board Schematics: https://www.ti.com/lit/zip/sprr458
+ * EVM Board Schematics(j784s4): https://www.ti.com/lit/zip/sprr458
+ * EVM Board Schematics(j742s2): https://www.ti.com/lit/zip/SPAC001
*/
/ {
chosen {
--
2.45.1
next prev parent reply other threads:[~2024-07-31 17:11 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-31 17:10 [PATCH v3 0/9] Introduce J742S2 SoC and EVM Manorit Chawdhry
2024-07-31 17:10 ` [PATCH v3 1/9] arm64: dts: ti: Move j784s4-{} include files to j784s4-j742s2-{}-common.dtsi Manorit Chawdhry
2024-07-31 17:10 ` [PATCH v3 2/9] arm64: dts: ti: Move k3-j784s4.dtsi to k3-j784s4-j742s2-common.dtsi Manorit Chawdhry
2024-07-31 17:10 ` [PATCH v3 3/9] arm64: dts: ti: Split k3-j784s4-j742s2-common.dtsi Manorit Chawdhry
2024-07-31 17:10 ` [PATCH v3 4/9] arm64: dts: ti: Split k3-j784s4-j742s2-main-common.dtsi Manorit Chawdhry
2024-08-07 13:09 ` Nishanth Menon
2024-08-07 13:20 ` Nishanth Menon
2024-08-08 4:52 ` Manorit Chawdhry
2024-08-08 5:28 ` Siddharth Vadapalli
2024-08-08 10:54 ` Nishanth Menon
2024-08-08 4:56 ` Manorit Chawdhry
2024-08-08 10:48 ` Nishanth Menon
2024-07-31 17:10 ` [PATCH v3 5/9] arm64: dts: ti: Move k3-j784s4-evm.dts to k3-j784s4-j742s2-evm-common.dtsi Manorit Chawdhry
2024-07-31 17:10 ` [PATCH v3 6/9] arm64: dts: ti: Split k3-j784s4-j742s2-evm-common.dtsi Manorit Chawdhry
2024-08-07 13:06 ` Nishanth Menon
2024-07-31 17:10 ` [PATCH v3 7/9] dt-bindings: arm: ti: Add bindings for J742S2 SoCs and Boards Manorit Chawdhry
2024-07-31 17:10 ` [PATCH v3 8/9] arm64: dts: ti: Introduce J742S2 SoC family Manorit Chawdhry
2024-07-31 17:10 ` Manorit Chawdhry [this message]
2024-08-07 9:41 ` [PATCH v3 9/9] arm64: dts: ti: Add support for J742S2 EVM board Beleswar Prasad Padhi
2024-08-07 11:51 ` Nishanth Menon
2024-08-07 12:06 ` Nishanth Menon
2024-08-07 13:25 ` [PATCH v3 0/9] Introduce J742S2 SoC and EVM Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240731-b4-upstream-j742s2-v3-9-da7fe3aa9e90@ti.com \
--to=m-chawdhry@ti.com \
--cc=a-limaye@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=n-francis@ti.com \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox