[PATCH 7/8] arm64: dts: qcom: x1e80100-qcp: Add power supply and sideband signal for pcie3

[Qiang Yu <quic_qianyu@quicinc.com>]

Add perst, wake and clkreq gpio config. Add required power supply.

Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
---
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 116 ++++++++++++++++++++++
 1 file changed, 116 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 1c3a6a7b3ed6..0deb0c4bfea9 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -254,6 +254,48 @@ vreg_nvme: regulator-nvme {
 		pinctrl-names = "default";
 		pinctrl-0 = <&nvme_reg_en>;
 	};
+
+	vreg_pcie_12v: regulator-pcie_12v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+
+		gpio = <&pm8550ve_8_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_x8_12v>;
+	};
+
+	vreg_pcie_3v3_aux: regulator-pcie_3v3_aux {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_3P3_AUX";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8380_3_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pm_sde7_aux_3p3_en>;
+	};
+
+	vreg_pcie_3v3: regulator-pcie_3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8380_3_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pm_sde7_main_3p3_en>;
+	};
 };
 
 &apps_rsc {
@@ -667,6 +709,57 @@ &mdss_dp3_phy {
 	status = "okay";
 };
 
+&pm8550ve_8_gpios {
+	pcie_x8_12v: pcie_x8_12v_on {
+		pins = "gpio8";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+};
+
+&pmc8380_3_gpios {
+	pm_sde7_aux_3p3_en: pm_sde7_aux_3p3 {
+		pins = "gpio8";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+
+	pm_sde7_main_3p3_en: pm_sde7_main_3p3 {
+		pins = "gpio6";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+};
+
+&pcie3 {
+	vpcie12v-supply = <&vreg_pcie_12v>;
+	vpcie3v3-supply = <&vreg_pcie_3v3>;
+	vpcie3v3aux-supply = <&vreg_pcie_3v3_aux>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_default>;
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	vdda-qref-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
 &pcie4 {
 	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
@@ -824,6 +917,29 @@ nvme_reg_en: nvme-reg-en-state {
 		bias-disable;
 	};
 
+	pcie3_default: pcie3-default-state {
+		clkreq-n-pins {
+			pins = "gpio144";
+			function = "pcie3_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+		       pins = "gpio145";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+		};
+	};
+
 	pcie4_default: pcie4-default-state {
 		clkreq-n-pins {
 			pins = "gpio147";
-- 
2.34.1