[PATCH v1] riscv: dts: starfive: disable unused csi/camss nodes

[PATCH v1] riscv: dts: starfive: disable unused csi/camss nodes

[Conor Dooley]

From: Conor Dooley <conor.dooley@microchip.com>

Aurelien reported probe failures due to the csi node being enabled
without having a camera attached to it. A camera was in the initial
submissions, but was removed from the dts, as it had not actually been
present on the board, but was from an addon board used by the
developer of the relevant drivers. The non-camera pipeline nodes were
not disabled when this happened and the probe failures are problematic
for Debian. Disable them.

CC: stable@vger.kernel.org
Fixes: 28ecaaa5af192 ("riscv: dts: starfive: jh7110: Add camera subsystem nodes")
Closes: https://lore.kernel.org/all/Zw1-vcN4CoVkfLjU@aurel32.net/
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
CC: Emil Renner Berthing <kernel@esmil.dk>
CC: Rob Herring <robh@kernel.org>
CC: Krzysztof Kozlowski <krzk+dt@kernel.org>
CC: Conor Dooley <conor+dt@kernel.org>
CC: Changhuang Liang <changhuang.liang@starfivetech.com>
CC: devicetree@vger.kernel.org
CC: linux-riscv@lists.infradead.org
CC: linux-kernel@vger.kernel.org
---
 arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index c7771b3b64758..d6c55f1cc96a9 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -128,7 +128,6 @@ &camss {
 	assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
 			  <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
 	assigned-clock-rates = <49500000>, <198000000>;
-	status = "okay";
 
 	ports {
 		#address-cells = <1>;
@@ -151,7 +150,6 @@ camss_from_csi2rx: endpoint {
 &csi2rx {
 	assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
 	assigned-clock-rates = <297000000>;
-	status = "okay";
 
 	ports {
 		#address-cells = <1>;
-- 
2.45.2

Re: [PATCH v1] riscv: dts: starfive: disable unused csi/camss nodes

[Aurelien Jarno]

Hi,

On 2024-10-16 21:11, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
> 
> Aurelien reported probe failures due to the csi node being enabled
> without having a camera attached to it. A camera was in the initial
> submissions, but was removed from the dts, as it had not actually been
> present on the board, but was from an addon board used by the
> developer of the relevant drivers. The non-camera pipeline nodes were
> not disabled when this happened and the probe failures are problematic
> for Debian. Disable them.
> 
> CC: stable@vger.kernel.org
> Fixes: 28ecaaa5af192 ("riscv: dts: starfive: jh7110: Add camera subsystem nodes")
> Closes: https://lore.kernel.org/all/Zw1-vcN4CoVkfLjU@aurel32.net/
> Reported-by: Aurelien Jarno <aurelien@aurel32.net>
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> ---
> CC: Emil Renner Berthing <kernel@esmil.dk>
> CC: Rob Herring <robh@kernel.org>
> CC: Krzysztof Kozlowski <krzk+dt@kernel.org>
> CC: Conor Dooley <conor+dt@kernel.org>
> CC: Changhuang Liang <changhuang.liang@starfivetech.com>
> CC: devicetree@vger.kernel.org
> CC: linux-riscv@lists.infradead.org
> CC: linux-kernel@vger.kernel.org
> ---
>  arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 2 --
>  1 file changed, 2 deletions(-)

Thanks for picking up that issue. I confirm this fix the "problem".

To give some more details, the problem for Debian is that it appears as
an error, with the line in red in dmesg or journalctl. However we would
like to be able to provide a kernel with such drivers enabled so that
users with a camera can just use an overlay or patch their device tree.

Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>

Regards
Aurelien
 

-- 
Aurelien Jarno                          GPG: 4096R/1DDD8C9B
aurelien@aurel32.net                     http://aurel32.net

Re: [PATCH v1] riscv: dts: starfive: disable unused csi/camss nodes

[Emil Renner Berthing]

Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
>
> Aurelien reported probe failures due to the csi node being enabled
> without having a camera attached to it. A camera was in the initial
> submissions, but was removed from the dts, as it had not actually been
> present on the board, but was from an addon board used by the
> developer of the relevant drivers. The non-camera pipeline nodes were
> not disabled when this happened and the probe failures are problematic
> for Debian. Disable them.
>
> CC: stable@vger.kernel.org
> Fixes: 28ecaaa5af192 ("riscv: dts: starfive: jh7110: Add camera subsystem nodes")
> Closes: https://lore.kernel.org/all/Zw1-vcN4CoVkfLjU@aurel32.net/
> Reported-by: Aurelien Jarno <aurelien@aurel32.net>
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

Thanks!

Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>

> ---
> CC: Emil Renner Berthing <kernel@esmil.dk>
> CC: Rob Herring <robh@kernel.org>
> CC: Krzysztof Kozlowski <krzk+dt@kernel.org>
> CC: Conor Dooley <conor+dt@kernel.org>
> CC: Changhuang Liang <changhuang.liang@starfivetech.com>
> CC: devicetree@vger.kernel.org
> CC: linux-riscv@lists.infradead.org
> CC: linux-kernel@vger.kernel.org
> ---
>  arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 2 --
>  1 file changed, 2 deletions(-)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> index c7771b3b64758..d6c55f1cc96a9 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> @@ -128,7 +128,6 @@ &camss {
>  	assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
>  			  <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
>  	assigned-clock-rates = <49500000>, <198000000>;
> -	status = "okay";
>
>  	ports {
>  		#address-cells = <1>;
> @@ -151,7 +150,6 @@ camss_from_csi2rx: endpoint {
>  &csi2rx {
>  	assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
>  	assigned-clock-rates = <297000000>;
> -	status = "okay";
>
>  	ports {
>  		#address-cells = <1>;
> --
> 2.45.2
>

Re: [PATCH v1] riscv: dts: starfive: disable unused csi/camss nodes

[Conor Dooley]

From: Conor Dooley <conor.dooley@microchip.com>

On Wed, 16 Oct 2024 21:11:15 +0100, Conor Dooley wrote:
> Aurelien reported probe failures due to the csi node being enabled
> without having a camera attached to it. A camera was in the initial
> submissions, but was removed from the dts, as it had not actually been
> present on the board, but was from an addon board used by the
> developer of the relevant drivers. The non-camera pipeline nodes were
> not disabled when this happened and the probe failures are problematic
> for Debian. Disable them.
> 
> [...]

Applied to riscv-soc-fixes, thanks!

[1/1] riscv: dts: starfive: disable unused csi/camss nodes
      https://git.kernel.org/conor/c/2e11e78667db

Thanks,
Conor.