Re: [PATCH v3 5/6] PCI: qcom: Add support for host_stop_link() & host_start_link()

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Tue, Nov 12, 2024 at 08:31:37PM +0530, Krishna chaitanya chundru wrote:
> For the switches like QPS615 which needs to configure it before
> the PCIe link is established.
> 
> If the link is up, the boatloader might powered and configured the
> endpoint/switch already. In that case don't touch PCIe link else
> assert the PERST# and disable LTSSM bit so that PCIe controller
> will not participate in the link training as part of host_stop_link().
> 
> De-assert the PERST# and enable LTSSM bit back in host_start_link().
> 
> Introduce ltssm_disable function op to stop the link training.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 39 ++++++++++++++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index ef44a82be058..048aea94e319 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -246,6 +246,7 @@ struct qcom_pcie_ops {
>  	void (*host_post_init)(struct qcom_pcie *pcie);
>  	void (*deinit)(struct qcom_pcie *pcie);
>  	void (*ltssm_enable)(struct qcom_pcie *pcie);
> +	void (*ltssm_disable)(struct qcom_pcie *pcie);
>  	int (*config_sid)(struct qcom_pcie *pcie);
>  };
>  
> @@ -617,6 +618,41 @@ static int qcom_pcie_post_init_1_0_0(struct qcom_pcie *pcie)
>  	return 0;
>  }
>  
> +static int qcom_pcie_host_start_link(struct dw_pcie *pci)
> +{
> +	struct qcom_pcie *pcie = to_qcom_pcie(pci);
> +
> +	if (!dw_pcie_link_up(pcie->pci))  {

I don't think the controller driver should worry about the bootloader
initialization. You should export dw_pcie_link_up() as a callback and call
start/stop link if only required (link not up) from the pwrctl driver.

- Mani

> +		qcom_ep_reset_deassert(pcie);
> +
> +		if (pcie->cfg->ops->ltssm_enable)
> +			pcie->cfg->ops->ltssm_enable(pcie);
> +	}
> +
> +	return 0;
> +}
> +
> +static void qcom_pcie_host_stop_link(struct dw_pcie *pci)
> +{
> +	struct qcom_pcie *pcie = to_qcom_pcie(pci);
> +
> +	if (!dw_pcie_link_up(pcie->pci))  {
> +		qcom_ep_reset_assert(pcie);
> +
> +		if (pcie->cfg->ops->ltssm_disable)
> +			pcie->cfg->ops->ltssm_disable(pcie);
> +	}
> +}
> +
> +static void qcom_pcie_2_3_2_ltssm_disable(struct qcom_pcie *pcie)
> +{
> +	u32 val;
> +
> +	val = readl(pcie->parf + PARF_LTSSM);
> +	val &= ~LTSSM_EN;
> +	writel(val, pcie->parf + PARF_LTSSM);
> +}
> +
>  static void qcom_pcie_2_3_2_ltssm_enable(struct qcom_pcie *pcie)
>  {
>  	u32 val;
> @@ -1361,6 +1397,7 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
>  	.host_post_init = qcom_pcie_host_post_init_2_7_0,
>  	.deinit = qcom_pcie_deinit_2_7_0,
>  	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> +	.ltssm_disable = qcom_pcie_2_3_2_ltssm_disable,
>  	.config_sid = qcom_pcie_config_sid_1_9_0,
>  };
>  
> @@ -1418,6 +1455,8 @@ static const struct qcom_pcie_cfg cfg_sc8280xp = {
>  static const struct dw_pcie_ops dw_pcie_ops = {
>  	.link_up = qcom_pcie_link_up,
>  	.start_link = qcom_pcie_start_link,
> +	.host_start_link = qcom_pcie_host_start_link,
> +	.host_stop_link = qcom_pcie_host_stop_link,
>  };
>  
>  static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
> 
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்