From: Antoniu Miclaus <antoniu.miclaus@analog.com>
To: <jic23@kernel.org>, <robh@kernel.org>, <conor+dt@kernel.org>,
<linux-iio@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-pwm@vger.kernel.org>
Cc: Antoniu Miclaus <antoniu.miclaus@analog.com>
Subject: [PATCH v2 3/3] iio: frequency: adf4371: add ref doubler
Date: Mon, 9 Dec 2024 12:41:33 +0200 [thread overview]
Message-ID: <20241209104201.25205-3-antoniu.miclaus@analog.com> (raw)
In-Reply-To: <20241209104201.25205-1-antoniu.miclaus@analog.com>
Add support for the reference doubler.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
---
changes in v2:
- drop redundant brackets.
drivers/iio/frequency/adf4371.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/frequency/adf4371.c b/drivers/iio/frequency/adf4371.c
index 55bee06fb42d..fd33a6f1cd9a 100644
--- a/drivers/iio/frequency/adf4371.c
+++ b/drivers/iio/frequency/adf4371.c
@@ -44,6 +44,8 @@
/* ADF4371_REG22 */
#define ADF4371_REFIN_MODE_MASK BIT(6)
#define ADF4371_REFIN_MODE(x) FIELD_PREP(ADF4371_REFIN_MODE_MASK, x)
+#define ADF4371_REF_DOUB_MASK BIT(5)
+#define ADF4371_REF_DOUB(x) FIELD_PREP(ADF4371_REF_DOUB_MASK, x)\
/* ADF4371_REG24 */
#define ADF4371_RF_DIV_SEL_MSK GENMASK(6, 4)
@@ -75,6 +77,9 @@
#define ADF4371_MAX_FREQ_REFIN 600000000UL /* Hz */
#define ADF4371_MAX_FREQ_REFIN_SE 500000000UL /* Hz */
+#define ADF4371_MIN_CLKIN_DOUB_FREQ 10000000ULL /* Hz */
+#define ADF4371_MAX_CLKIN_DOUB_FREQ 125000000ULL /* Hz */
+
/* MOD1 is a 24-bit primary modulus with fixed value of 2^25 */
#define ADF4371_MODULUS1 33554432ULL
/* MOD2 is the programmable, 14-bit auxiliary fractional modulus */
@@ -480,7 +485,7 @@ static const struct iio_info adf4371_info = {
static int adf4371_setup(struct adf4371_state *st)
{
unsigned int synth_timeout = 2, timeout = 1, vco_alc_timeout = 1;
- unsigned int vco_band_div, tmp;
+ unsigned int vco_band_div, tmp, ref_doubler_en;
bool ref_diff_en;
int ret;
@@ -516,6 +521,10 @@ static int adf4371_setup(struct adf4371_state *st)
(!ref_diff_en && st->clkin_freq > ADF4371_MAX_FREQ_REFIN_SE))
return -EINVAL;
+ if (st->clkin_freq < ADF4371_MAX_CLKIN_DOUB_FREQ &&
+ st->clkin_freq > ADF4371_MIN_CLKIN_DOUB_FREQ)
+ ref_doubler_en = 1;
+
ret = regmap_update_bits(st->regmap, ADF4371_REG(0x22),
ADF4371_REFIN_MODE_MASK,
ADF4371_REFIN_MODE(ref_diff_en));
@@ -531,7 +540,8 @@ static int adf4371_setup(struct adf4371_state *st)
*/
do {
st->ref_div_factor++;
- st->fpfd = st->clkin_freq / st->ref_div_factor;
+ st->fpfd = st->clkin_freq * (1 + ref_doubler_en) /
+ st->ref_div_factor;
} while (st->fpfd > ADF4371_MAX_FREQ_PFD);
/* Calculate Timeouts */
--
2.47.1
next prev parent reply other threads:[~2024-12-09 10:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-09 10:41 [PATCH v2 1/3] dt-bindings: iio: adf4371: add differential ref Antoniu Miclaus
2024-12-09 10:41 ` [PATCH v2 2/3] iio: frequency: " Antoniu Miclaus
2024-12-09 10:41 ` Antoniu Miclaus [this message]
2024-12-19 11:28 ` [PATCH v2 3/3] iio: frequency: adf4371: add ref doubler Dan Carpenter
2024-12-15 12:35 ` [PATCH v2 1/3] dt-bindings: iio: adf4371: add differential ref Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241209104201.25205-3-antoniu.miclaus@analog.com \
--to=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox