Devicetree
 help / color / mirror / Atom feed
From: Depeng Shao <quic_depengs@quicinc.com>
To: <rfoss@kernel.org>, <todor.too@gmail.com>,
	<bryan.odonoghue@linaro.org>, <mchehab@kernel.org>,
	<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
	<vladimir.zapolskiy@linaro.org>
Cc: <quic_eberman@quicinc.com>, <quic_depengs@quicinc.com>,
	<linux-media@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<kernel@quicinc.com>
Subject: [PATCH 05/16] media: qcom: camss: csiphy-3ph: Move CSIPHY variables to data field inside csiphy struct
Date: Wed, 25 Dec 2024 19:05:12 +0530	[thread overview]
Message-ID: <20241225133523.4034820-6-quic_depengs@quicinc.com> (raw)
In-Reply-To: <20241225133523.4034820-1-quic_depengs@quicinc.com>

From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

A .data field in the csiphy device structure allows us to extend out the
register layout of the three phase capable CSIPHY layer.

Move the existing lane configuration structure to an encapsulating
structure -> struct csiphy_device_regs which is derived from the .data
field populated at PHY init time, as opposed to calculated at lane
configuration.

Reviewed-by: default avatarVladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
---
 .../qcom/camss/camss-csiphy-3ph-1-0.c         | 54 ++++++++++---------
 .../media/platform/qcom/camss/camss-csiphy.h  |  6 +++
 2 files changed, 36 insertions(+), 24 deletions(-)

diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index b283df7634bb..39cc7109ccf0 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -470,32 +470,10 @@ static void csiphy_gen1_config_lanes(struct csiphy_device *csiphy,
 static void csiphy_gen2_config_lanes(struct csiphy_device *csiphy,
 				     u8 settle_cnt)
 {
-	const struct csiphy_lane_regs *r;
-	int i, array_size;
+	const struct csiphy_lane_regs *r = csiphy->regs->lane_regs;
+	int i, array_size = csiphy->regs->lane_array_size;
 	u32 val;
 
-	switch (csiphy->camss->res->version) {
-	case CAMSS_7280:
-		r = &lane_regs_sm8250[0];
-		array_size = ARRAY_SIZE(lane_regs_sm8250);
-		break;
-	case CAMSS_8250:
-		r = &lane_regs_sm8250[0];
-		array_size = ARRAY_SIZE(lane_regs_sm8250);
-		break;
-	case CAMSS_8280XP:
-		r = &lane_regs_sc8280xp[0];
-		array_size = ARRAY_SIZE(lane_regs_sc8280xp);
-		break;
-	case CAMSS_845:
-		r = &lane_regs_sdm845[0];
-		array_size = ARRAY_SIZE(lane_regs_sdm845);
-		break;
-	default:
-		WARN(1, "unknown cspi version\n");
-		return;
-	}
-
 	for (i = 0; i < array_size; i++, r++) {
 		switch (r->csiphy_param_type) {
 		case CSIPHY_SETTLE_CNT_LOWER_BYTE:
@@ -588,6 +566,34 @@ static void csiphy_lanes_disable(struct csiphy_device *csiphy,
 
 static int csiphy_init(struct csiphy_device *csiphy)
 {
+	struct device *dev = csiphy->camss->dev;
+	struct csiphy_device_regs *regs;
+
+	regs = devm_kmalloc(dev, sizeof(*regs), GFP_KERNEL);
+	if (!regs)
+		return -ENOMEM;
+
+	csiphy->regs = regs;
+
+	switch (csiphy->camss->res->version) {
+	case CAMSS_845:
+		regs->lane_regs = &lane_regs_sdm845[0];
+		regs->lane_array_size = ARRAY_SIZE(lane_regs_sdm845);
+		break;
+	case CAMSS_7280:
+	case CAMSS_8250:
+		regs->lane_regs = &lane_regs_sm8250[0];
+		regs->lane_array_size = ARRAY_SIZE(lane_regs_sm8250);
+		break;
+	case CAMSS_8280XP:
+		regs->lane_regs = &lane_regs_sc8280xp[0];
+		regs->lane_array_size = ARRAY_SIZE(lane_regs_sc8280xp);
+		break;
+	default:
+		WARN(1, "unknown csiphy version\n");
+		return -ENODEV;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.h b/drivers/media/platform/qcom/camss/camss-csiphy.h
index 49393dfd5215..4d731597fed7 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.h
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.h
@@ -85,6 +85,11 @@ struct csiphy_subdev_resources {
 	const struct csiphy_formats *formats;
 };
 
+struct csiphy_device_regs {
+	const struct csiphy_lane_regs *lane_regs;
+	int lane_array_size;
+};
+
 struct csiphy_device {
 	struct camss *camss;
 	u8 id;
@@ -103,6 +108,7 @@ struct csiphy_device {
 	struct csiphy_config cfg;
 	struct v4l2_mbus_framefmt fmt[MSM_CSIPHY_PADS_NUM];
 	const struct csiphy_subdev_resources *res;
+	struct csiphy_device_regs *regs;
 };
 
 struct camss_subdev_resources;
-- 
2.34.1


  parent reply	other threads:[~2024-12-25 13:36 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-25 13:35 [PATCH v7 00/16] media: qcom: camss: Add sm8550 support Depeng Shao
2024-12-25 13:35 ` [PATCH 01/16] media: qcom: camss: csiphy-3ph: Fix trivial indentation fault in defines Depeng Shao
2024-12-25 13:35 ` [PATCH 02/16] media: qcom: camss: csiphy-3ph: Remove redundant PHY init sequence control loop Depeng Shao
2024-12-25 13:35 ` [PATCH 03/16] media: qcom: camss: csiphy-3ph: Rename struct Depeng Shao
2024-12-25 13:35 ` [PATCH 04/16] media: qcom: camss: csiphy: Add an init callback to CSI PHY devices Depeng Shao
2024-12-25 13:35 ` Depeng Shao [this message]
2024-12-25 13:35 ` [PATCH 06/16] media: qcom: camss: csiphy-3ph: Use an offset variable to find common control regs Depeng Shao
2024-12-25 13:35 ` [PATCH 07/16] media: qcom: camss: csid: Move common code into csid core Depeng Shao
2024-12-25 13:35 ` [PATCH 08/16] media: qcom: camss: vfe: Move common code into vfe core Depeng Shao
2024-12-25 13:35 ` [PATCH 09/16] media: qcom: camss: Add callback API for RUP update and buf done Depeng Shao
2024-12-25 13:35 ` [PATCH 10/16] media: qcom: camss: Add default case in vfe_src_pad_code Depeng Shao
2024-12-25 13:35 ` [PATCH 11/16] media: qcom: camss: csid: Only add TPG v4l2 ctrl if TPG hardware is available Depeng Shao
2024-12-25 13:35 ` [PATCH 12/16] dt-bindings: media: camss: Add qcom,sm8550-camss binding Depeng Shao
2024-12-27  9:10   ` Krzysztof Kozlowski
2025-01-04 13:40     ` Depeng Shao
2025-01-06 14:00       ` Hans Verkuil
2025-01-07 12:47         ` Depeng Shao
2024-12-25 13:35 ` [PATCH 13/16] media: qcom: camss: Add sm8550 compatible Depeng Shao
2024-12-25 13:35 ` [PATCH 14/16] media: qcom: camss: csiphy-3ph: Add Gen2 v2.1.2 two-phase MIPI CSI-2 DPHY support Depeng Shao
2024-12-25 13:35 ` [PATCH 15/16] media: qcom: camss: Add CSID 780 support Depeng Shao
2024-12-25 13:35 ` [PATCH 16/16] media: qcom: camss: Add support for VFE 780 Depeng Shao
  -- strict thread matches above, loose matches on Subject: below --
2024-12-11 14:07 [PATCH v6 00/16] media: qcom: camss: Add sm8550 support Depeng Shao
2024-12-11 14:07 ` [PATCH 05/16] media: qcom: camss: csiphy-3ph: Move CSIPHY variables to data field inside csiphy struct Depeng Shao
2024-12-05 15:55 [PATCH v5 00/16] media: qcom: camss: Add sm8550 support Depeng Shao
2024-12-05 15:55 ` [PATCH 05/16] media: qcom: camss: csiphy-3ph: Move CSIPHY variables to data field inside csiphy struct Depeng Shao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241225133523.4034820-6-quic_depengs@quicinc.com \
    --to=quic_depengs@quicinc.com \
    --cc=bryan.odonoghue@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@quicinc.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=quic_eberman@quicinc.com \
    --cc=rfoss@kernel.org \
    --cc=robh@kernel.org \
    --cc=todor.too@gmail.com \
    --cc=vladimir.zapolskiy@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox