From: Vikram Sharma <quic_vikramsa@quicinc.com>
To: <rfoss@kernel.org>, <todor.too@gmail.com>,
<bryan.odonoghue@linaro.org>, <mchehab@kernel.org>,
<robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<andersson@kernel.org>, <konradybcio@kernel.org>,
<hverkuil-cisco@xs4all.nl>, <cros-qcom-dts-watchers@chromium.org>,
<catalin.marinas@arm.com>, <will@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<quic_vikramsa@quicinc.com>, <linux-media@vger.kernel.org>,
<linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
"Suresh Vankadara" <quic_svankada@quicinc.com>
Subject: [PATCH v1 2/2] arm64: dts: qcom: sa8775p: Add support for camss
Date: Mon, 10 Feb 2025 21:26:05 +0530 [thread overview]
Message-ID: <20250210155605.575367-3-quic_vikramsa@quicinc.com> (raw)
In-Reply-To: <20250210155605.575367-1-quic_vikramsa@quicinc.com>
Add changes to support the camera subsystem on the SA8775P.
Co-developed-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 187 ++++++++++++++++++++++++++
1 file changed, 187 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 3394ae2d1300..83640fef05d2 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
#include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
#include <dt-bindings/clock/qcom,sa8775p-gcc.h>
#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
@@ -3796,6 +3797,192 @@ videocc: clock-controller@abf0000 {
#power-domain-cells = <1>;
};
+ camss: isp@ac7a000 {
+ compatible = "qcom,sa8775p-camss";
+
+ reg = <0x0 0xac7a000 0x0 0x0f01>,
+ <0x0 0xac7c000 0x0 0x0f01>,
+ <0x0 0xac84000 0x0 0x0f01>,
+ <0x0 0xac88000 0x0 0x0f01>,
+ <0x0 0xac8c000 0x0 0x0f01>,
+ <0x0 0xac90000 0x0 0x0f01>,
+ <0x0 0xac94000 0x0 0x0f01>,
+ <0x0 0xac78000 0x0 0x1000>,
+ <0x0 0xac9c000 0x0 0x2000>,
+ <0x0 0xac9e000 0x0 0x2000>,
+ <0x0 0xaca0000 0x0 0x2000>,
+ <0x0 0xaca2000 0x0 0x2000>,
+ <0x0 0xacac000 0x0 0x0400>,
+ <0x0 0xacad000 0x0 0x0400>,
+ <0x0 0xacae000 0x0 0x0400>,
+ <0x0 0xac4d000 0x0 0xd000>,
+ <0x0 0xac5a000 0x0 0xd000>,
+ <0x0 0xac85000 0x0 0x0d00>,
+ <0x0 0xac89000 0x0 0x0d00>,
+ <0x0 0xac8d000 0x0 0x0d00>,
+ <0x0 0xac91000 0x0 0x0d00>,
+ <0x0 0xac95000 0x0 0x0d00>;
+ reg-names = "csid0",
+ "csid1",
+ "csid_lite0",
+ "csid_lite1",
+ "csid_lite2",
+ "csid_lite3",
+ "csid_lite4",
+ "csid_wrapper",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "tpg0",
+ "tpg1",
+ "tpg2",
+ "vfe0",
+ "vfe1",
+ "vfe_lite0",
+ "vfe_lite1",
+ "vfe_lite2",
+ "vfe_lite3",
+ "vfe_lite4";
+
+ clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+ <&camcc CAM_CC_CORE_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+ <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+ <&camcc CAM_CC_CSID_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY3_CLK>,
+ <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&gcc GCC_CAMERA_SF_AXI_CLK>,
+ <&camcc CAM_CC_ICP_AHB_CLK>,
+ <&camcc CAM_CC_IFE_0_CLK>,
+ <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_1_CLK>,
+ <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+ clock-names = "camnoc_axi",
+ "core_ahb",
+ "cpas_ahb",
+ "cpas_fast_ahb_clk",
+ "cpas_ife_lite",
+ "cpas_vfe0",
+ "cpas_vfe1",
+ "csid",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy_rx",
+ "gcc_axi_hf",
+ "gcc_axi_sf",
+ "icp_ahb",
+ "vfe0",
+ "vfe0_fast_ahb",
+ "vfe1",
+ "vfe1_fast_ahb",
+ "vfe_lite",
+ "vfe_lite_ahb",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid";
+
+ interrupts = <GIC_SPI 565 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 564 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 545 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 546 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 547 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid-lite0",
+ "csid-lite1",
+ "csid-lite2",
+ "csid-lite3",
+ "csid-lite4",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "tpg0",
+ "tpg1",
+ "tpg2",
+ "vfe0",
+ "vfe1",
+ "vfe-lite0",
+ "vfe-lite1",
+ "vfe-lite2",
+ "vfe-lite3",
+ "vfe-lite4";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "ahb",
+ "hf_0",
+ "sf_0";
+
+ iommus = <&apps_smmu 0x3400 0x20>;
+
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ power-domain-names = "top";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+ };
+ };
+
camcc: clock-controller@ade0000 {
compatible = "qcom,sa8775p-camcc";
reg = <0x0 0x0ade0000 0x0 0x20000>;
--
2.25.1
next prev parent reply other threads:[~2025-02-10 15:56 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-10 15:56 [PATCH v1 0/2] arm64: dts: qcom: sa8775p: Add sa8775p camss support Vikram Sharma
2025-02-10 15:56 ` [PATCH v1 1/2] media: dt-bindings: Add qcom,sa8775p-camss Vikram Sharma
2025-02-11 10:08 ` Bryan O'Donoghue
2025-02-12 7:19 ` Vikram Sharma
2025-02-10 15:56 ` Vikram Sharma [this message]
2025-04-14 13:44 ` [PATCH v1 2/2] arm64: dts: qcom: sa8775p: Add support for camss Konrad Dybcio
[not found] ` <ee4d08b0-f291-4018-bda3-96dfbc7a07ff@quicinc.com>
2025-04-16 16:09 ` Konrad Dybcio
2025-04-14 13:48 ` Konrad Dybcio
2025-04-18 7:28 ` Vikram Sharma
2025-04-18 9:51 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250210155605.575367-3-quic_vikramsa@quicinc.com \
--to=quic_vikramsa@quicinc.com \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=quic_svankada@quicinc.com \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=todor.too@gmail.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox