public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Heiko Stuebner <heiko@sntech.de>
To: heiko@sntech.de
Cc: quentin.schulz@cherry.de, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	dse@thaumatec.com, Heiko Stuebner <heiko.stuebner@cherry.de>
Subject: [PATCH v3 2/3] arm64: dts: rockchip: add dsi controller nodes on rk3588
Date: Wed, 26 Feb 2025 15:09:41 +0100	[thread overview]
Message-ID: <20250226140942.3825223-3-heiko@sntech.de> (raw)
In-Reply-To: <20250226140942.3825223-1-heiko@sntech.de>

From: Heiko Stuebner <heiko.stuebner@cherry.de>

The RK3588 comes with two DSI2 controllers based on a new Synopsis IP.
Add the necessary nodes for them.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
---
 arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 57 +++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index 5535d5d905f6..9f9e0d3c7722 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/rockchip,rk3588-cru.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/rk3588-power.h>
 #include <dt-bindings/reset/rockchip,rk3588-cru.h>
 #include <dt-bindings/phy/phy.h>
@@ -1406,6 +1407,62 @@ i2s9_8ch: i2s@fddfc000 {
 		status = "disabled";
 	};
 
+	dsi0: dsi@fde20000 {
+		compatible = "rockchip,rk3588-mipi-dsi2";
+		reg = <0x0 0xfde20000 0x0 0x10000>;
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_DSIHOST0>, <&cru CLK_DSIHOST0>;
+		clock-names = "pclk", "sys";
+		resets = <&cru SRST_P_DSIHOST0>;
+		reset-names = "apb";
+		power-domains = <&power RK3588_PD_VOP>;
+		phys = <&mipidcphy0 PHY_TYPE_DPHY>;
+		phy-names = "dcphy";
+		rockchip,grf = <&vop_grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi0_in: port@0 {
+				reg = <0>;
+			};
+
+			dsi0_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	dsi1: dsi@fde30000 {
+		compatible = "rockchip,rk3588-mipi-dsi2";
+		reg = <0x0 0xfde30000 0x0 0x10000>;
+		interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru PCLK_DSIHOST1>, <&cru CLK_DSIHOST1>;
+		clock-names = "pclk", "sys";
+		resets = <&cru SRST_P_DSIHOST1>;
+		reset-names = "apb";
+		power-domains = <&power RK3588_PD_VOP>;
+		phys = <&mipidcphy1 PHY_TYPE_DPHY>;
+		phy-names = "dcphy";
+		rockchip,grf = <&vop_grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsi1_in: port@0 {
+				reg = <0>;
+			};
+
+			dsi1_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	hdmi0: hdmi@fde80000 {
 		compatible = "rockchip,rk3588-dw-hdmi-qp";
 		reg = <0x0 0xfde80000 0x0 0x20000>;
-- 
2.47.2


  parent reply	other threads:[~2025-02-26 14:10 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-26 14:09 [PATCH v3 0/3] arm64: dts: rockchip: add and enable DSI2 on rk3588 Heiko Stuebner
2025-02-26 14:09 ` [PATCH v3 1/3] arm64: dts: rockchip: add mipi dcphy nodes to rk3588 Heiko Stuebner
2025-04-11 12:33   ` Sebastian Reichel
2025-02-26 14:09 ` Heiko Stuebner [this message]
2025-04-11 12:34   ` [PATCH v3 2/3] arm64: dts: rockchip: add dsi controller nodes on rk3588 Sebastian Reichel
2025-02-26 14:09 ` [PATCH v3 3/3] arm64: dts: rockchip: add overlay for tiger-haikou video-demo adapter Heiko Stuebner
2025-02-26 14:14   ` Heiko Stübner
2025-02-27  5:13   ` Dragan Simic
2025-03-25 15:06   ` Quentin Schulz
2025-02-26 22:27 ` [PATCH v3 0/3] arm64: dts: rockchip: add and enable DSI2 on rk3588 Rob Herring (Arm)
2025-04-11 12:36 ` Sebastian Reichel
2025-04-26 21:46 ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250226140942.3825223-3-heiko@sntech.de \
    --to=heiko@sntech.de \
    --cc=devicetree@vger.kernel.org \
    --cc=dse@thaumatec.com \
    --cc=heiko.stuebner@cherry.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=quentin.schulz@cherry.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox