[PATCH v3 3/3] arm64: dts: rockchip: add overlay for tiger-haikou video-demo adapter

[Heiko Stuebner <heiko@sntech.de>]

From: Heiko Stuebner <heiko.stuebner@cherry.de>

This adds support for the video-demo-adapter DEVKIT ADDON CAM-TS-A01
(https://embedded.cherry.de/product/development-kit/) for the Haikou
devkit with Tiger RK3588 SoM.

The Video Demo adapter is an adapter connected to the fake PCIe slot
labeled "Video Connector" on the Haikou devkit.

It's main feature is a Leadtek DSI-display with touchscreen and a camera
(that is not supported yet). To drive these components a number of
additional regulators are grouped on the adapter as well as a PCA9670
gpio-expander to provide the needed additional gpio-lines.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   5 +
 .../rk3588-tiger-haikou-video-demo.dtso       | 153 ++++++++++++++++++
 2 files changed, 158 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-video-demo.dtso

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index db6017272ff1..4cddb5d2807d 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -158,6 +158,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-video-demo.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb
@@ -214,3 +215,7 @@ rk3588-rock-5b-pcie-ep-dtbs := rk3588-rock-5b.dtb \
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtb
 rk3588-rock-5b-pcie-srns-dtbs := rk3588-rock-5b.dtb \
 	rk3588-rock-5b-pcie-srns.dtbo
+
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-video-demo.dtb
+rk3588-tiger-haikou-video-demo-dtbs := rk3588-tiger-haikou.dtb \
+	rk3588-tiger-haikou-video-demo.dtbo
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-video-demo.dtso
new file mode 100644
index 000000000000..b8636fcb4f39
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-video-demo.dtso
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Cherry Embedded Solutions GmbH
+ *
+ * DEVKIT ADDON CAM-TS-A01
+ * https://embedded.cherry.de/product/development-kit/
+ *
+ * DT-overlay for the camera / DSI demo appliance for Haikou boards.
+ * In the flavour for use with a Tiger system-on-module.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+
+&{/} {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&dc_12v>;
+		pwms = <&pwm0 0 25000 0>;
+	};
+
+	vcc1v8_video: regulator-vcc1v8-video {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8-video";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_baseboard>;
+	};
+
+	vcc2v8_video: regulator-vcc2v8-video {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc2v8-video";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&vcc3v3_baseboard>;
+	};
+
+	video-adapter-leds {
+		compatible = "gpio-leds";
+
+		video-adapter-led {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pca9670 7 GPIO_ACTIVE_HIGH>;
+			label = "video-adapter-led";
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "leadtek,ltk050h3148w";
+		reg = <0>;
+		backlight = <&backlight>;
+		iovcc-supply = <&vcc1v8_video>;
+		reset-gpios = <&pca9670 0 GPIO_ACTIVE_LOW>;
+		vci-supply = <&vcc2v8_video>;
+
+		port {
+			mipi_panel_in: endpoint {
+				remote-endpoint = <&dsi0_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi0_in {
+	dsi0_in_vp3: endpoint {
+		remote-endpoint = <&vp3_out_dsi0>;
+	};
+};
+
+&dsi0_out {
+	dsi0_out_panel: endpoint {
+		remote-endpoint = <&mipi_panel_in>;
+	};
+};
+
+&i2c6 {
+	/* OV5675, GT911, DW9714 are limited to 400KHz */
+	clock-frequency = <400000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@14 {
+		compatible = "goodix,gt911";
+		reg = <0x14>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
+		irq-gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int>;
+		reset-gpios = <&pca9670 1 GPIO_ACTIVE_HIGH>;
+		AVDD28-supply = <&vcc2v8_video>;
+		VDDIO-supply = <&vcc3v3_baseboard>;
+	};
+
+	pca9670: gpio@27 {
+		compatible = "nxp,pca9670";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pca9670_resetn>;
+		reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mipidcphy0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pca9670 {
+		pca9670_resetn: pca9670-resetn {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	touch {
+		touch_int: touch-int {
+			rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&vp3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	vp3_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi0_in_vp3>;
+	};
+};
-- 
2.47.2