From: Andre Przywara <andre.przywara@arm.com>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v4 01/14] clk: sunxi-ng: mp: introduce dual-divider clock
Date: Fri, 7 Mar 2025 00:26:15 +0000 [thread overview]
Message-ID: <20250307002628.10684-2-andre.przywara@arm.com> (raw)
In-Reply-To: <20250307002628.10684-1-andre.przywara@arm.com>
The Allwinner A523 SoC introduces some new MP-style mod clock, where the
second "P" divider is an actual numerical divider value, and not the
numbers of bits to shift (1..32 instead of 1,2,4,8).
The rest of the clock is the same as the existing MP clock, so enhance the
existing code to accommodate for this.
Introduce the new CCU feature bit CCU_FEATURE_DUAL_DIV to mark an MP
clock as having two dividers, and change the dividing and encoding code
to differentiate the two cases.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
---
drivers/clk/sunxi-ng/ccu_common.h | 1 +
drivers/clk/sunxi-ng/ccu_mp.c | 51 +++++++++++++++++++++++++------
2 files changed, 42 insertions(+), 10 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu_common.h b/drivers/clk/sunxi-ng/ccu_common.h
index dd330426a6e5f..50fd268329671 100644
--- a/drivers/clk/sunxi-ng/ccu_common.h
+++ b/drivers/clk/sunxi-ng/ccu_common.h
@@ -19,6 +19,7 @@
#define CCU_FEATURE_SIGMA_DELTA_MOD BIT(7)
#define CCU_FEATURE_KEY_FIELD BIT(8)
#define CCU_FEATURE_CLOSEST_RATE BIT(9)
+#define CCU_FEATURE_DUAL_DIV BIT(10)
/* MMC timing mode switch bit */
#define CCU_MMC_NEW_TIMING_MODE BIT(30)
diff --git a/drivers/clk/sunxi-ng/ccu_mp.c b/drivers/clk/sunxi-ng/ccu_mp.c
index 2bb8987ddcc20..354c981943b6f 100644
--- a/drivers/clk/sunxi-ng/ccu_mp.c
+++ b/drivers/clk/sunxi-ng/ccu_mp.c
@@ -10,15 +10,23 @@
#include "ccu_gate.h"
#include "ccu_mp.h"
+static unsigned int next_div(unsigned int div, bool shift)
+{
+ if (shift)
+ return div << 1;
+ return div + 1;
+}
+
static unsigned long ccu_mp_find_best(unsigned long parent, unsigned long rate,
unsigned int max_m, unsigned int max_p,
+ bool shift,
unsigned int *m, unsigned int *p)
{
unsigned long best_rate = 0;
unsigned int best_m = 0, best_p = 0;
unsigned int _m, _p;
- for (_p = 1; _p <= max_p; _p <<= 1) {
+ for (_p = 1; _p <= max_p; _p = next_div(_p, shift)) {
for (_m = 1; _m <= max_m; _m++) {
unsigned long tmp_rate = parent / _p / _m;
@@ -43,7 +51,8 @@ static unsigned long ccu_mp_find_best_with_parent_adj(struct clk_hw *hw,
unsigned long *parent,
unsigned long rate,
unsigned int max_m,
- unsigned int max_p)
+ unsigned int max_p,
+ bool shift)
{
unsigned long parent_rate_saved;
unsigned long parent_rate, now;
@@ -60,7 +69,7 @@ static unsigned long ccu_mp_find_best_with_parent_adj(struct clk_hw *hw,
maxdiv = max_m * max_p;
maxdiv = min(ULONG_MAX / rate, maxdiv);
- for (_p = 1; _p <= max_p; _p <<= 1) {
+ for (_p = 1; _p <= max_p; _p = next_div(_p, shift)) {
for (_m = 1; _m <= max_m; _m++) {
div = _m * _p;
@@ -103,18 +112,26 @@ static unsigned long ccu_mp_round_rate(struct ccu_mux_internal *mux,
struct ccu_mp *cmp = data;
unsigned int max_m, max_p;
unsigned int m, p;
+ bool shift = true;
if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate *= cmp->fixed_post_div;
+ if (cmp->common.features & CCU_FEATURE_DUAL_DIV)
+ shift = false;
+
max_m = cmp->m.max ?: 1 << cmp->m.width;
- max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
+ if (shift)
+ max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
+ else
+ max_p = cmp->p.max ?: 1 << cmp->p.width;
if (!clk_hw_can_set_rate_parent(&cmp->common.hw)) {
- rate = ccu_mp_find_best(*parent_rate, rate, max_m, max_p, &m, &p);
+ rate = ccu_mp_find_best(*parent_rate, rate, max_m, max_p, shift,
+ &m, &p);
} else {
rate = ccu_mp_find_best_with_parent_adj(hw, parent_rate, rate,
- max_m, max_p);
+ max_m, max_p, shift);
}
if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
@@ -167,7 +184,11 @@ static unsigned long ccu_mp_recalc_rate(struct clk_hw *hw,
p = reg >> cmp->p.shift;
p &= (1 << cmp->p.width) - 1;
- rate = (parent_rate >> p) / m;
+ if (cmp->common.features & CCU_FEATURE_DUAL_DIV)
+ rate = (parent_rate / p) / m;
+ else
+ rate = (parent_rate >> p) / m;
+
if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate /= cmp->fixed_post_div;
@@ -190,20 +211,27 @@ static int ccu_mp_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long flags;
unsigned int max_m, max_p;
unsigned int m, p;
+ bool shift = true;
u32 reg;
+ if (cmp->common.features & CCU_FEATURE_DUAL_DIV)
+ shift = false;
+
/* Adjust parent_rate according to pre-dividers */
parent_rate = ccu_mux_helper_apply_prediv(&cmp->common, &cmp->mux, -1,
parent_rate);
max_m = cmp->m.max ?: 1 << cmp->m.width;
- max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
+ if (shift)
+ max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);
+ else
+ max_p = cmp->p.max ?: 1 << cmp->p.width;
/* Adjust target rate according to post-dividers */
if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV)
rate = rate * cmp->fixed_post_div;
- ccu_mp_find_best(parent_rate, rate, max_m, max_p, &m, &p);
+ ccu_mp_find_best(parent_rate, rate, max_m, max_p, shift, &m, &p);
spin_lock_irqsave(cmp->common.lock, flags);
@@ -211,7 +239,10 @@ static int ccu_mp_set_rate(struct clk_hw *hw, unsigned long rate,
reg &= ~GENMASK(cmp->m.width + cmp->m.shift - 1, cmp->m.shift);
reg &= ~GENMASK(cmp->p.width + cmp->p.shift - 1, cmp->p.shift);
reg |= (m - cmp->m.offset) << cmp->m.shift;
- reg |= ilog2(p) << cmp->p.shift;
+ if (shift)
+ reg |= ilog2(p) << cmp->p.shift;
+ else
+ reg |= (p - cmp->p.offset) << cmp->p.shift;
writel(reg, cmp->common.base + cmp->common.reg);
--
2.46.3
next prev parent reply other threads:[~2025-03-07 0:26 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-07 0:26 [PATCH v4 00/14] clk: sunxi-ng: add A523 clock support Andre Przywara
2025-03-07 0:26 ` Andre Przywara [this message]
2025-03-07 0:26 ` [PATCH v4 02/14] clk: sunxi-ng: mp: provide wrappers for setting feature flags Andre Przywara
2025-03-09 6:38 ` Jernej Škrabec
2025-03-07 0:26 ` [PATCH v4 03/14] clk: sunxi-ng: Add support for update bit Andre Przywara
2025-03-07 0:26 ` [PATCH v4 04/14] dt-bindings: clk: sunxi-ng: document two Allwinner A523 CCUs Andre Przywara
2025-03-11 17:21 ` Rob Herring (Arm)
2025-03-07 0:26 ` [PATCH v4 05/14] clk: sunxi-ng: Add support for the A523/T527 CCU PLLs Andre Przywara
2025-03-09 6:43 ` Jernej Škrabec
2025-03-07 0:26 ` [PATCH v4 06/14] clk: sunxi-ng: a523: Add support for bus clocks Andre Przywara
2025-03-07 0:26 ` [PATCH v4 07/14] clk: sunxi-ng: a523: add video mod clocks Andre Przywara
2025-03-09 6:49 ` Jernej Škrabec
2025-03-07 0:26 ` [PATCH v4 08/14] clk: sunxi-ng: a523: add system " Andre Przywara
2025-03-09 6:50 ` Jernej Škrabec
2025-03-07 0:26 ` [PATCH v4 09/14] clk: sunxi-ng: a523: add interface " Andre Przywara
2025-03-09 6:53 ` Jernej Škrabec
2025-03-07 0:26 ` [PATCH v4 10/14] clk: sunxi-ng: a523: add USB " Andre Przywara
2025-03-07 0:26 ` [PATCH v4 11/14] clk: sunxi-ng: a523: remaining " Andre Przywara
2025-03-09 6:54 ` Jernej Škrabec
2025-03-07 0:26 ` [PATCH v4 12/14] clk: sunxi-ng: a523: add bus clock gates Andre Przywara
2025-03-09 6:57 ` Jernej Škrabec
2025-03-07 0:26 ` [PATCH v4 13/14] clk: sunxi-ng: a523: add reset lines Andre Przywara
2025-03-09 7:00 ` Jernej Škrabec
2025-03-07 0:26 ` [PATCH v4 14/14] clk: sunxi-ng: add support for the A523/T527 PRCM CCU Andre Przywara
2025-03-09 7:03 ` Jernej Škrabec
2025-03-11 18:24 ` [PATCH v4 00/14] clk: sunxi-ng: add A523 clock support Chen-Yu Tsai
2025-03-12 4:03 ` Chen-Yu Tsai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250307002628.10684-2-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=sboyd@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox