public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
To: Vinod Koul <vkoul@kernel.org>,
	Kishon Vijay Abraham I <kishon@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Alim Akhtar <alim.akhtar@samsung.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Abel Vesa <abel.vesa@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org
Subject: [PATCH v3 05/10] phy: phy-snps-eusb2: split phy init code
Date: Fri, 21 Mar 2025 15:58:49 +0200	[thread overview]
Message-ID: <20250321135854.1431375-6-ivo.ivanov.ivanov1@gmail.com> (raw)
In-Reply-To: <20250321135854.1431375-1-ivo.ivanov.ivanov1@gmail.com>

The current phy init consists of hardware power-up, as well as
QCOM-specific eUSB2 init code. Split it into two parts, to make room
for such non-QCOM init code.

Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
---
 drivers/phy/phy-snps-eusb2.c | 96 +++++++++++++++++++++++-------------
 1 file changed, 63 insertions(+), 33 deletions(-)

diff --git a/drivers/phy/phy-snps-eusb2.c b/drivers/phy/phy-snps-eusb2.c
index 405278c18..fa878389f 100644
--- a/drivers/phy/phy-snps-eusb2.c
+++ b/drivers/phy/phy-snps-eusb2.c
@@ -121,6 +121,10 @@ static const char * const eusb2_hsphy_vreg_names[] = {
 
 #define EUSB2_NUM_VREGS		ARRAY_SIZE(eusb2_hsphy_vreg_names)
 
+struct snps_eusb2_phy_drvdata {
+	int (*phy_init)(struct phy *p);
+};
+
 struct snps_eusb2_hsphy {
 	struct phy *phy;
 	void __iomem *base;
@@ -133,6 +137,8 @@ struct snps_eusb2_hsphy {
 	enum phy_mode mode;
 
 	struct phy *repeater;
+
+	const struct snps_eusb2_phy_drvdata *data;
 };
 
 static int snps_eusb2_hsphy_set_mode(struct phy *p, enum phy_mode mode, int submode)
@@ -230,41 +236,11 @@ static int qcom_eusb2_ref_clk_init(struct snps_eusb2_hsphy *phy)
 	return 0;
 }
 
-static int snps_eusb2_hsphy_init(struct phy *p)
+static int qcom_snps_eusb2_hsphy_init(struct phy *p)
 {
 	struct snps_eusb2_hsphy *phy = phy_get_drvdata(p);
 	int ret;
 
-	ret = regulator_bulk_enable(ARRAY_SIZE(phy->vregs), phy->vregs);
-	if (ret)
-		return ret;
-
-	ret = phy_init(phy->repeater);
-	if (ret) {
-		dev_err(&p->dev, "repeater init failed. %d\n", ret);
-		goto disable_vreg;
-	}
-
-	ret = clk_prepare_enable(phy->ref_clk);
-	if (ret) {
-		dev_err(&p->dev, "failed to enable ref clock, %d\n", ret);
-		goto disable_vreg;
-	}
-
-	ret = reset_control_assert(phy->phy_reset);
-	if (ret) {
-		dev_err(&p->dev, "failed to assert phy_reset, %d\n", ret);
-		goto disable_ref_clk;
-	}
-
-	usleep_range(100, 150);
-
-	ret = reset_control_deassert(phy->phy_reset);
-	if (ret) {
-		dev_err(&p->dev, "failed to de-assert phy_reset, %d\n", ret);
-		goto disable_ref_clk;
-	}
-
 	snps_eusb2_hsphy_write_mask(phy->base, QCOM_USB_PHY_CFG0,
 				    CMN_CTRL_OVERRIDE_EN, CMN_CTRL_OVERRIDE_EN);
 
@@ -334,6 +310,52 @@ static int snps_eusb2_hsphy_init(struct phy *p)
 				    USB2_SUSPEND_N_SEL, 0);
 
 	return 0;
+}
+
+static const struct snps_eusb2_phy_drvdata sm8550_snps_eusb2_phy = {
+	.phy_init	= qcom_snps_eusb2_hsphy_init,
+};
+
+static int snps_eusb2_hsphy_init(struct phy *p)
+{
+	struct snps_eusb2_hsphy *phy = phy_get_drvdata(p);
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(phy->vregs), phy->vregs);
+	if (ret)
+		return ret;
+
+	ret = phy_init(phy->repeater);
+	if (ret) {
+		dev_err(&p->dev, "repeater init failed. %d\n", ret);
+		goto disable_vreg;
+	}
+
+	ret = clk_prepare_enable(phy->ref_clk);
+	if (ret) {
+		dev_err(&p->dev, "failed to enable ref clock, %d\n", ret);
+		goto disable_vreg;
+	}
+
+	ret = reset_control_assert(phy->phy_reset);
+	if (ret) {
+		dev_err(&p->dev, "failed to assert phy_reset, %d\n", ret);
+		goto disable_ref_clk;
+	}
+
+	usleep_range(100, 150);
+
+	ret = reset_control_deassert(phy->phy_reset);
+	if (ret) {
+		dev_err(&p->dev, "failed to de-assert phy_reset, %d\n", ret);
+		goto disable_ref_clk;
+	}
+
+	ret = phy->data->phy_init(p);
+	if (ret)
+		goto disable_ref_clk;
+
+	return 0;
 
 disable_ref_clk:
 	clk_disable_unprepare(phy->ref_clk);
@@ -371,6 +393,7 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev)
 	struct snps_eusb2_hsphy *phy;
 	struct phy_provider *phy_provider;
 	struct phy *generic_phy;
+	const struct snps_eusb2_phy_drvdata *drv_data;
 	int ret, i;
 	int num;
 
@@ -378,6 +401,11 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev)
 	if (!phy)
 		return -ENOMEM;
 
+	drv_data = of_device_get_match_data(dev);
+	if (!drv_data)
+		return -EINVAL;
+	phy->data = drv_data;
+
 	phy->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(phy->base))
 		return PTR_ERR(phy->base);
@@ -424,8 +452,10 @@ static int snps_eusb2_hsphy_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id snps_eusb2_hsphy_of_match_table[] = {
-	{ .compatible = "qcom,sm8550-snps-eusb2-phy", },
-	{ },
+	{
+		.compatible = "qcom,sm8550-snps-eusb2-phy",
+		.data = &sm8550_snps_eusb2_phy,
+	}, { },
 };
 MODULE_DEVICE_TABLE(of, snps_eusb2_hsphy_of_match_table);
 
-- 
2.43.0


  parent reply	other threads:[~2025-03-21 13:59 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-21 13:58 [PATCH v3 00/10] phy: samsung: add Exynos2200 SNPS eUSB2 driver Ivaylo Ivanov
2025-03-21 13:58 ` [PATCH v3 01/10] dt-bindings: phy: add exynos2200 eusb2 phy support Ivaylo Ivanov
2025-03-24  8:45   ` Krzysztof Kozlowski
2025-03-21 13:58 ` [PATCH v3 02/10] dt-bindings: phy: samsung,usb3-drd-phy: add exynos2200 support Ivaylo Ivanov
2025-03-25 15:16   ` Rob Herring
2025-03-21 13:58 ` [PATCH v3 03/10] phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory Ivaylo Ivanov
2025-03-21 14:15   ` Dmitry Baryshkov
2025-03-21 14:17     ` Ivaylo Ivanov
2025-03-21 13:58 ` [PATCH v3 04/10] phy: phy-snps-eusb2: refactor constructs names Ivaylo Ivanov
2025-03-21 14:17   ` Dmitry Baryshkov
2025-03-21 13:58 ` Ivaylo Ivanov [this message]
2025-03-21 14:31   ` [PATCH v3 05/10] phy: phy-snps-eusb2: split phy init code Dmitry Baryshkov
2025-03-21 14:34     ` neil.armstrong
2025-03-21 13:58 ` [PATCH v3 06/10] phy: phy-snps-eusb2: make repeater optional Ivaylo Ivanov
2025-03-21 15:13   ` Dmitry Baryshkov
2025-03-21 13:58 ` [PATCH v3 07/10] phy: phy-snps-eusb2: make reset control optional Ivaylo Ivanov
2025-03-21 13:58 ` [PATCH v3 08/10] phy: phy-snps-eusb2: refactor reference clock init Ivaylo Ivanov
2025-03-21 15:53   ` Dmitry Baryshkov
2025-03-21 13:58 ` [PATCH v3 09/10] phy: phy-snps-eusb2: add support for exynos2200 Ivaylo Ivanov
2025-03-21 15:53   ` Dmitry Baryshkov
2025-03-21 13:58 ` [PATCH v3 10/10] phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller Ivaylo Ivanov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250321135854.1431375-6-ivo.ivanov.ivanov1@gmail.com \
    --to=ivo.ivanov.ivanov1@gmail.com \
    --cc=abel.vesa@linaro.org \
    --cc=alim.akhtar@samsung.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=s.nawrocki@samsung.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox