Re: [PATCH 1/9] dt-bindings: pwm: marvell,pxa: add optional property resets

[Yixun Lan <dlan@gentoo.org>]

Hi Philipp,

On 17:54 Tue 15 Apr     , Guodong Xu wrote:
> On Tue, Apr 15, 2025 at 4:53 PM Philipp Zabel <p.zabel@pengutronix.de> wrote:
> >
> > On Fr, 2025-04-11 at 17:44 +0100, Conor Dooley wrote:
> > > On Fri, Apr 11, 2025 at 09:14:15PM +0800, Guodong Xu wrote:
> > > > Add an optional resets property for the Marvell PWM PXA binding.
> > > >
> > > > Signed-off-by: Guodong Xu <guodong@riscstar.com>
> > > > ---
> > > >  Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml | 3 +++
> > > >  1 file changed, 3 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml b/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml
> > > > index 9ee1946dc2e1..9640d4b627c2 100644
> > > > --- a/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml
> > > > +++ b/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml
> > > > @@ -31,6 +31,9 @@ properties:
> > > >    clocks:
> > > >      maxItems: 1
> > > >
> > > > +  resets:
> > > > +    maxItems: 1
> > >
> > > Do any of the currently supported devices use a reset? If not, then add
> > > this in tandem with the new compatible and only allow it there please.
> >
> > Also, if spacemit,k1-pwm can not work without the reset being
> > deasserted, mark it as required.

If I inerpret correctly, only reset requires explicitly being de-asserted,
need to mark as required? that's being said, if reset comes out as de-asserted
 by default after power reset, then not necessary?
(in other cases, some device block is in asserted state by default)

thanks
> >
> 
> Thank you Philipp. spacemit,k1-pwm can not work without the reset.
> I will add that in the next version.
> 
> -Guodong
> 
> > The driver can still use reset_control_get_optional.
> >
> > regards
> > Philipp

-- 
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55