From: Sudeep Holla <sudeep.holla@arm.com>
To: "Rob Herring (Arm)" <robh@kernel.org>
Cc: devicetree@vger.kernel.org, Leo Yan <leo.yan@arm.com>,
linux-arm-kernel@lists.infradead.org,
Lorenzo Pieralisi <lpieralisi@kernel.org>,
Liviu Dudau <liviu.dudau@arm.com>
Subject: Re: [PATCH 1/3] arm64: dts: fvp: Add CPU idle states for Rev C model
Date: Fri, 9 May 2025 16:29:57 +0100 [thread overview]
Message-ID: <20250509-lurking-hidden-shellfish-cf2bbb@sudeepholla> (raw)
In-Reply-To: <174679984875.3368325.1365758165371282064.robh@kernel.org>
On Fri, May 09, 2025 at 09:16:54AM -0500, Rob Herring (Arm) wrote:
>
> On Thu, 08 May 2025 11:32:23 +0100, Sudeep Holla wrote:
> > Add CPU idle state definitions to the FVP Rev C device tree to enable
> > support for CPU lower power modes. This allows the system to properly
> > enter low power states during idle. It is disabled by default as it is
> > know to impact performance on the models.
> >
> > Note that the power_state parameter(arm,psci-suspend-param) doesn't use
> > the Extended StateID format for compatibility reasons on FVP.
> >
> > Tested on the FVP Rev C model with PSCI support enabled firmware.
> >
> > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
> > ---
> > arch/arm64/boot/dts/arm/fvp-base-revc.dts | 32 +++++++++++++++++++++++
> > 1 file changed, 32 insertions(+)
> >
>
>
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
>
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
>
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
>
> pip3 install dtschema --upgrade
>
>
> This patch series was applied (using b4) to base:
> Base: attempting to guess base-commit...
> Base: tags/v6.15-rc1-1-g59529bbe642d (exact match)
>
> If this is not the correct base, please add 'base-commit' tag
> (or use b4 which does this automatically)
>
> New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/arm/' for 20250508103225.354925-1-sudeep.holla@arm.com:
>
> arch/arm64/boot/dts/arm/fvp-base-revc.dtb: idle-states: entry-method:0: 'psci' was expected
> from schema $id: http://devicetree.org/schemas/cpu/idle-states.yaml#
> arch/arm64/boot/dts/arm/fvp-base-revc.dtb: timer@2a810000 (arm,armv7-timer-mem): #size-cells: 1 was expected
> from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer_mmio.yaml#
>
Thanks for the report. Now fixed locally.
--
Regards,
Sudeep
prev parent reply other threads:[~2025-05-09 15:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-08 10:32 [PATCH 1/3] arm64: dts: fvp: Add CPU idle states for Rev C model Sudeep Holla
2025-05-08 10:32 ` [PATCH 2/3] arm64: dts: fvp: Add system timer for broadcast during CPU idle Sudeep Holla
2025-05-08 10:32 ` [PATCH 3/3] arm64: dts: fvp: Reserve 64MB for the FF-A firmware in memory map Sudeep Holla
2025-05-08 13:25 ` [PATCH 1/3] arm64: dts: fvp: Add CPU idle states for Rev C model Ben Horgan
2025-05-08 15:51 ` Sudeep Holla
2025-05-08 16:09 ` Leo Yan
2025-05-08 16:13 ` Sudeep Holla
2025-05-09 14:16 ` Rob Herring (Arm)
2025-05-09 15:29 ` Sudeep Holla [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250509-lurking-hidden-shellfish-cf2bbb@sudeepholla \
--to=sudeep.holla@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=leo.yan@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=liviu.dudau@arm.com \
--cc=lpieralisi@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox