Re: [PATCH v2 06/14] iio: accel: bma220: add get regulator check

[Jonathan Cameron <jic23@kernel.org>]

On Wed, 10 Sep 2025 10:57:11 +0300
Petre Rodan <petre.rodan@subdimension.ro> wrote:

I don't follow the 'add get regulator check' of the patch description.
This is ensuring they are powered up if necessary.  So I'd
just go with the vague: "turn power supplies on"


> Add devm_regulator_bulk_get_enable() to device probe().
> 
> Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
> ---
> no change
> ---
>  drivers/iio/accel/bma220_core.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/iio/accel/bma220_core.c b/drivers/iio/accel/bma220_core.c
> index 6bc2e5c3fb6cebd50209acbcc2d5340630c27cd1..b6f1374a9cca52966c1055113710061a7284cf5a 100644
> --- a/drivers/iio/accel/bma220_core.c
> +++ b/drivers/iio/accel/bma220_core.c
> @@ -11,6 +11,7 @@
>  #include <linux/module.h>
>  #include <linux/mutex.h>
>  #include <linux/pm.h>
> +#include <linux/regulator/consumer.h>
>  #include <linux/types.h>
>  #include <linux/spi/spi.h>
>  
> @@ -205,6 +206,13 @@ static const struct iio_info bma220_info = {
>  static int bma220_init(struct spi_device *spi)
>  {
>  	int ret;
> +	static const char * const regulator_names[] = { "vddd", "vddio", "vdda" };
> +
> +	ret = devm_regulator_bulk_get_enable(&spi->dev,
> +					     ARRAY_SIZE(regulator_names),
> +					     regulator_names);
> +	if (ret)
> +		return dev_err_probe(&spi->dev, ret, "Failed to get regulators\n");
>  
>  	ret = bma220_read_reg(spi, BMA220_REG_ID);
>  	if (ret != BMA220_CHIP_ID)
>