[PATCH v2 1/3] dt-bindings: spi: add SpacemiT K1 SPI support

[Alex Elder <elder@riscstar.com>]

Add support for the SPI controller implemented by the SpacemiT K1 SoC.

Signed-off-by: Alex Elder <elder@riscstar.com>
---
v2: - Use enum rather than const for the binding compatible string
    - Omit the label and status property in the binding example
    - No more spacemit,k1-ssp-id property
    - Interrupts no longer specified with interrupts-extended

 .../bindings/spi/spacemit,k1-spi.yaml         | 87 +++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spacemit,k1-spi.yaml

diff --git a/Documentation/devicetree/bindings/spi/spacemit,k1-spi.yaml b/Documentation/devicetree/bindings/spi/spacemit,k1-spi.yaml
new file mode 100644
index 0000000000000..a6978212ff570
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spacemit,k1-spi.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spacemit,k1-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT K1 SoC Serial Peripheral Interface (SPI)
+
+maintainers:
+  - Alex Elder <elder@kernel.org>
+
+description:
+  The SpacemiT K1 SoC implements a SPI controller that has two 32-entry
+  FIFOs, for transmit and receive.  Details are currently available in
+  section 18.2.1 of the K1 User Manual, found in the SpacemiT Keystone
+  K1 Documentation[1].  The controller transfers words using PIO.  DMA
+  transfers are supported as well, if both TX and RX DMA channels are
+  specified,
+
+  [1] https://developer.spacemit.com/documentation
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    const: spacemit,k1-spi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Core clock
+      - description: Bus clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: bus
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: RX DMA channel
+      - description: TX DMA channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/clock/spacemit,k1-syscon.h>
+    spi@d401c000 {
+        compatible = "spacemit,k1-spi";
+        reg = <0xd401c000 0x30>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&syscon_apbc CLK_SSP3>,
+                 <&syscon_apbc CLK_SSP3_BUS>;
+        clock-names = "core",
+                      "bus";
+        resets = <&syscon_apbc RESET_SSP3>;
+        interrupts = <55>;
+        dmas = <&pdma 20>,
+               <&pdma 19>;
+        dma-names = "rx",
+                    "tx";
+    };
-- 
2.48.1