[PATCH v3] dt-bindings: drm/bridge: Update reg-name and reg description list for cdns,mhdp8546 compatible

[PATCH v3] dt-bindings: drm/bridge: Update reg-name and reg description list for cdns,mhdp8546 compatible

[Harikrishna Shenoy]

Remove j721e-intg register name from reg-name list for cdns,mhdp8546
compatible. The j721e-integ registers are specific to TI SoCs, so they
are not required for compatibles other than ti,j721e-mhdp8546.

Update reg and reg-names top level constraints with lists according
to compatibles.

Move the register name constraints and reg description list to the
appropriate compatibility sections to ensure the correct register
names are used with each compatible value also adding the DSC register
to make bindings align with what the hardware supports.

Fixes: 7169d082e7e6 ("dt-bindings: drm/bridge: MHDP8546 bridge binding changes for HDCP")
Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
---

Links to some discussions pointing to need for a fixes patch: 
https://lore.kernel.org/all/20250903220312.GA2903503-robh@kernel.org/
https://lore.kernel.org/all/d2367789-6b54-4fc2-bb7c-609c0fe084d3@ti.com/

Link to v2:
<https://lore.kernel.org/all/20251119122447.514729-1-h-shenoy@ti.com/>

Changelog v2 --> v3:
-Add the reg description list and reg-name list in top level constraints
using oneOf for either of compatible.
Logs after testing some cases: https://gist.github.com/h-shenoy/a422f7278859cd95447e674963caabd9

Link to v1:
<https://lore.kernel.org/all/20251107131535.1841393-1-h-shenoy@ti.com/>

Changelog v1 --> v2:
-Update the reg description list for each compatible and add register space
for dsc to make the bindings reflect what hardware supports although 
the driver doesn't support dsc yet.

Note: j721e-integ are not optional registers for ti-compatible.

 .../display/bridge/cdns,mhdp8546.yaml         | 85 ++++++++++++++-----
 1 file changed, 66 insertions(+), 19 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
index c2b369456e4e2..632595ef32f63 100644
--- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
@@ -17,23 +17,45 @@ properties:
       - ti,j721e-mhdp8546
 
   reg:
-    minItems: 1
-    items:
-      - description:
-          Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
-          The AUX and PMA registers are not part of this range, they are instead
-          included in the associated PHY.
-      - description:
-          Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
-      - description:
-          Register block of mhdptx sapb registers.
+    oneOf:
+      - minItems: 2
+      - items:
+          - description:
+              Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
+              The AUX and PMA registers are not part of this range, they are instead
+              included in the associated PHY.
+          - description:
+              Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
+          - description:
+              Register block of mhdptx sapb registers.
+          - description:
+              Register block for mhdptx DSC encoder registers.
+
+      - minItems: 1
+      - items:
+          - description:
+              Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
+              The AUX and PMA registers are not part of this range, they are instead
+              included in the associated PHY.
+          - description:
+              Register block of mhdptx sapb registers.
+          - description:
+              Register block for mhdptx DSC encoder registers.
 
   reg-names:
-    minItems: 1
-    items:
-      - const: mhdptx
-      - const: j721e-intg
-      - const: mhdptx-sapb
+    oneOf:
+      - minItems: 2
+      - items:
+          - const: mhdptx
+          - const: j721e-intg
+          - const: mhdptx-sapb
+          - const: dsc
+
+      - minItems: 1
+      - items:
+          - const: mhdptx
+          - const: mhdptx-sapb
+          - const: dsc
 
   clocks:
     maxItems: 1
@@ -100,18 +122,43 @@ allOf:
       properties:
         reg:
           minItems: 2
-          maxItems: 3
+          items:
+            - description:
+                Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
+                The AUX and PMA registers are not part of this range, they are instead
+                included in the associated PHY.
+            - description:
+                Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
+            - description:
+                Register block of mhdptx sapb registers.
+            - description:
+                Register block for mhdptx DSC encoder registers.
         reg-names:
           minItems: 2
-          maxItems: 3
+          items:
+            - const: mhdptx
+            - const: j721e-intg
+            - const: mhdptx-sapb
+            - const: dsc
     else:
       properties:
         reg:
           minItems: 1
-          maxItems: 2
+          items:
+            - description:
+                Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
+                The AUX and PMA registers are not part of this range, they are instead
+                included in the associated PHY.
+            - description:
+                Register block of mhdptx sapb registers.
+            - description:
+                Register block for mhdptx DSC encoder registers.
         reg-names:
           minItems: 1
-          maxItems: 2
+          items:
+            - const: mhdptx
+            - const: mhdptx-sapb
+            - const: dsc
 
 required:
   - compatible
-- 
2.34.1

Re: [PATCH v3] dt-bindings: drm/bridge: Update reg-name and reg description list for cdns,mhdp8546 compatible

[Krzysztof Kozlowski]

On Fri, Nov 21, 2025 at 06:04:37PM +0530, Harikrishna Shenoy wrote:
> Remove j721e-intg register name from reg-name list for cdns,mhdp8546
> compatible. The j721e-integ registers are specific to TI SoCs, so they
> are not required for compatibles other than ti,j721e-mhdp8546.
> 
> Update reg and reg-names top level constraints with lists according
> to compatibles.
> 
> Move the register name constraints and reg description list to the
> appropriate compatibility sections to ensure the correct register
> names are used with each compatible value also adding the DSC register
> to make bindings align with what the hardware supports.
> 
> Fixes: 7169d082e7e6 ("dt-bindings: drm/bridge: MHDP8546 bridge binding changes for HDCP")
> Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
> ---
> 
> Links to some discussions pointing to need for a fixes patch: 
> https://lore.kernel.org/all/20250903220312.GA2903503-robh@kernel.org/
> https://lore.kernel.org/all/d2367789-6b54-4fc2-bb7c-609c0fe084d3@ti.com/
> 
> Link to v2:
> <https://lore.kernel.org/all/20251119122447.514729-1-h-shenoy@ti.com/>
> 
> Changelog v2 --> v3:
> -Add the reg description list and reg-name list in top level constraints
> using oneOf for either of compatible.
> Logs after testing some cases: https://gist.github.com/h-shenoy/a422f7278859cd95447e674963caabd9
> 
> Link to v1:
> <https://lore.kernel.org/all/20251107131535.1841393-1-h-shenoy@ti.com/>
> 
> Changelog v1 --> v2:
> -Update the reg description list for each compatible and add register space
> for dsc to make the bindings reflect what hardware supports although 
> the driver doesn't support dsc yet.
> 
> Note: j721e-integ are not optional registers for ti-compatible.
> 
>  .../display/bridge/cdns,mhdp8546.yaml         | 85 ++++++++++++++-----
>  1 file changed, 66 insertions(+), 19 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
> index c2b369456e4e2..632595ef32f63 100644
> --- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
> @@ -17,23 +17,45 @@ properties:
>        - ti,j721e-mhdp8546
>  
>    reg:
> -    minItems: 1
> -    items:
> -      - description:
> -          Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
> -          The AUX and PMA registers are not part of this range, they are instead
> -          included in the associated PHY.
> -      - description:
> -          Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
> -      - description:
> -          Register block of mhdptx sapb registers.
> +    oneOf:
> +      - minItems: 2
> +      - items:

This is wrong syntax. You created here a list, so you now allow
anything with minItems 2.

> +          - description:
> +              Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
> +              The AUX and PMA registers are not part of this range, they are instead
> +              included in the associated PHY.
> +          - description:
> +              Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
> +          - description:
> +              Register block of mhdptx sapb registers.
> +          - description:
> +              Register block for mhdptx DSC encoder registers.
> +
> +      - minItems: 1

Actually anything with minItems 1... I asked for list of TWO, not FOUR,
items. Or if syntax is getting to complicated, just min and maxItems.


> +      - items:
> +          - description:
> +              Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
> +              The AUX and PMA registers are not part of this range, they are instead
> +              included in the associated PHY.
> +          - description:
> +              Register block of mhdptx sapb registers.
> +          - description:
> +              Register block for mhdptx DSC encoder registers.
>  
>    reg-names:
> -    minItems: 1
> -    items:
> -      - const: mhdptx
> -      - const: j721e-intg
> -      - const: mhdptx-sapb
> +    oneOf:
> +      - minItems: 2
> +      - items:

Also wrong.

> +          - const: mhdptx
> +          - const: j721e-intg
> +          - const: mhdptx-sapb
> +          - const: dsc
> +
> +      - minItems: 1
> +      - items:
> +          - const: mhdptx
> +          - const: mhdptx-sapb
> +          - const: dsc
>  
>    clocks:
>      maxItems: 1
> @@ -100,18 +122,43 @@ allOf:
>        properties:
>          reg:
>            minItems: 2
> -          maxItems: 3

Your commit msg says you "remove" but here you ADD one more item, thus
growing this 3->4.

How remove can result in 3 becoming 4?


Best regards,
Krzysztof

Re: [PATCH v3] dt-bindings: drm/bridge: Update reg-name and reg description list for cdns,mhdp8546 compatible

[Harikrishna shenoy]

On 23/11/25 15:30, Krzysztof Kozlowski wrote:
> On Fri, Nov 21, 2025 at 06:04:37PM +0530, Harikrishna Shenoy wrote:
>> Remove j721e-intg register name from reg-name list for cdns,mhdp8546
>> compatible. The j721e-integ registers are specific to TI SoCs, so they
>> are not required for compatibles other than ti,j721e-mhdp8546.
>>
>> Update reg and reg-names top level constraints with lists according
>> to compatibles.
>>
>> Move the register name constraints and reg description list to the
>> appropriate compatibility sections to ensure the correct register
>> names are used with each compatible value also adding the DSC register
>> to make bindings align with what the hardware supports.
>>
>> Fixes: 7169d082e7e6 ("dt-bindings: drm/bridge: MHDP8546 bridge binding changes for HDCP")
>> Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
>> ---
>>
>> Links to some discussions pointing to need for a fixes patch:
>> https://lore.kernel.org/all/20250903220312.GA2903503-robh@kernel.org/
>> https://lore.kernel.org/all/d2367789-6b54-4fc2-bb7c-609c0fe084d3@ti.com/
>>
>> Link to v2:
>> <https://lore.kernel.org/all/20251119122447.514729-1-h-shenoy@ti.com/>
>>
>> Changelog v2 --> v3:
>> -Add the reg description list and reg-name list in top level constraints
>> using oneOf for either of compatible.
>> Logs after testing some cases: https://gist.github.com/h-shenoy/a422f7278859cd95447e674963caabd9
>>
>> Link to v1:
>> <https://lore.kernel.org/all/20251107131535.1841393-1-h-shenoy@ti.com/>
>>
>> Changelog v1 --> v2:
>> -Update the reg description list for each compatible and add register space
>> for dsc to make the bindings reflect what hardware supports although
>> the driver doesn't support dsc yet.
>>
>> Note: j721e-integ are not optional registers for ti-compatible.
>>
>>   .../display/bridge/cdns,mhdp8546.yaml         | 85 ++++++++++++++-----
>>   1 file changed, 66 insertions(+), 19 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
>> index c2b369456e4e2..632595ef32f63 100644
>> --- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
>> +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
>> @@ -17,23 +17,45 @@ properties:
>>         - ti,j721e-mhdp8546
>>   
>>     reg:
>> -    minItems: 1
>> -    items:
>> -      - description:
>> -          Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
>> -          The AUX and PMA registers are not part of this range, they are instead
>> -          included in the associated PHY.
>> -      - description:
>> -          Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
>> -      - description:
>> -          Register block of mhdptx sapb registers.
>> +    oneOf:
>> +      - minItems: 2
>> +      - items:
> 
> This is wrong syntax. You created here a list, so you now allow
> anything with minItems 2.
Hi Krzysztof,

The list defined here restricts what lists are accepted, so for 
cdns,mhdp8546 compatible anything more than 3 items is rejected 
(example: 
https://gist.github.com/h-shenoy/a422f7278859cd95447e674963caabd9). 
Could you please help me with an
example where you think the bindings are incorrect?

> 
>> +          - description:
>> +              Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
>> +              The AUX and PMA registers are not part of this range, they are instead
>> +              included in the associated PHY.
>> +          - description:
>> +              Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
>> +          - description:
>> +              Register block of mhdptx sapb registers.
>> +          - description:
>> +              Register block for mhdptx DSC encoder registers.
>> +
>> +      - minItems: 1
> 
> Actually anything with minItems 1... I asked for list of TWO, not FOUR,
> items. Or if syntax is getting to complicated, just min and maxItems.
> 
> 
>> +      - items:
>> +          - description:
>> +              Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
>> +              The AUX and PMA registers are not part of this range, they are instead
>> +              included in the associated PHY.
>> +          - description:
>> +              Register block of mhdptx sapb registers.
>> +          - description:
>> +              Register block for mhdptx DSC encoder registers.
>>   
>>     reg-names:
>> -    minItems: 1
>> -    items:
>> -      - const: mhdptx
>> -      - const: j721e-intg
>> -      - const: mhdptx-sapb
>> +    oneOf:
>> +      - minItems: 2
>> +      - items:
> 
> Also wrong.
> 
>> +          - const: mhdptx
>> +          - const: j721e-intg
>> +          - const: mhdptx-sapb
>> +          - const: dsc
>> +
>> +      - minItems: 1
>> +      - items:
>> +          - const: mhdptx
>> +          - const: mhdptx-sapb
>> +          - const: dsc
>>   
>>     clocks:
>>       maxItems: 1
>> @@ -100,18 +122,43 @@ allOf:
>>         properties:
>>           reg:
>>             minItems: 2
>> -          maxItems: 3
> 
> Your commit msg says you "remove" but here you ADD one more item, thus
> growing this 3->4.
> 
> How remove can result in 3 becoming 4?
> 
Yes, remove is for j721e-intg for cdns,mhdp8546 compatible, and to make
bindings complete have added dsc reg-blocks, these changes reflects 
correct capabilities of hardware, have mentioned these in commit message 
as well.

Thanks.
> 
> Best regards,
> Krzysztof
> 

Re: [PATCH v3] dt-bindings: drm/bridge: Update reg-name and reg description list for cdns,mhdp8546 compatible

[Krzysztof Kozlowski]

On 25/11/2025 06:26, Harikrishna shenoy wrote:
> 
> 
> On 23/11/25 15:30, Krzysztof Kozlowski wrote:
>> On Fri, Nov 21, 2025 at 06:04:37PM +0530, Harikrishna Shenoy wrote:
>>> Remove j721e-intg register name from reg-name list for cdns,mhdp8546
>>> compatible. The j721e-integ registers are specific to TI SoCs, so they
>>> are not required for compatibles other than ti,j721e-mhdp8546.
>>>
>>> Update reg and reg-names top level constraints with lists according
>>> to compatibles.
>>>
>>> Move the register name constraints and reg description list to the
>>> appropriate compatibility sections to ensure the correct register
>>> names are used with each compatible value also adding the DSC register
>>> to make bindings align with what the hardware supports.
>>>
>>> Fixes: 7169d082e7e6 ("dt-bindings: drm/bridge: MHDP8546 bridge binding changes for HDCP")
>>> Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
>>> ---
>>>
>>> Links to some discussions pointing to need for a fixes patch:
>>> https://lore.kernel.org/all/20250903220312.GA2903503-robh@kernel.org/
>>> https://lore.kernel.org/all/d2367789-6b54-4fc2-bb7c-609c0fe084d3@ti.com/
>>>
>>> Link to v2:
>>> <https://lore.kernel.org/all/20251119122447.514729-1-h-shenoy@ti.com/>
>>>
>>> Changelog v2 --> v3:
>>> -Add the reg description list and reg-name list in top level constraints
>>> using oneOf for either of compatible.
>>> Logs after testing some cases: https://gist.github.com/h-shenoy/a422f7278859cd95447e674963caabd9
>>>
>>> Link to v1:
>>> <https://lore.kernel.org/all/20251107131535.1841393-1-h-shenoy@ti.com/>
>>>
>>> Changelog v1 --> v2:
>>> -Update the reg description list for each compatible and add register space
>>> for dsc to make the bindings reflect what hardware supports although
>>> the driver doesn't support dsc yet.
>>>
>>> Note: j721e-integ are not optional registers for ti-compatible.
>>>
>>>   .../display/bridge/cdns,mhdp8546.yaml         | 85 ++++++++++++++-----
>>>   1 file changed, 66 insertions(+), 19 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
>>> index c2b369456e4e2..632595ef32f63 100644
>>> --- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
>>> +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
>>> @@ -17,23 +17,45 @@ properties:
>>>         - ti,j721e-mhdp8546
>>>   
>>>     reg:
>>> -    minItems: 1
>>> -    items:
>>> -      - description:
>>> -          Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
>>> -          The AUX and PMA registers are not part of this range, they are instead
>>> -          included in the associated PHY.
>>> -      - description:
>>> -          Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
>>> -      - description:
>>> -          Register block of mhdptx sapb registers.
>>> +    oneOf:
>>> +      - minItems: 2
>>> +      - items:
>>
>> This is wrong syntax. You created here a list, so you now allow
>> anything with minItems 2.
> Hi Krzysztof,
> 
> The list defined here restricts what lists are accepted, so for 

No. It does not.

Look - you defined list of ONLY minItems:2, without anything else. The
problem is that your oneOf consist of four separate cases and you wanted
two cases, so only:
oneOf:
 - foo
   whatever goes here

 - bar
   further schema

Not four.

> cdns,mhdp8546 compatible anything more than 3 items is rejected 
> (example: 
> https://gist.github.com/h-shenoy/a422f7278859cd95447e674963caabd9). 
> Could you please help me with an
> example where you think the bindings are incorrect?
> 
>>
>>> +          - description:
>>> +              Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
>>> +              The AUX and PMA registers are not part of this range, they are instead
>>> +              included in the associated PHY.
>>> +          - description:
>>> +              Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
>>> +          - description:
>>> +              Register block of mhdptx sapb registers.
>>> +          - description:
>>> +              Register block for mhdptx DSC encoder registers.
>>> +
>>> +      - minItems: 1
>>
>> Actually anything with minItems 1... I asked for list of TWO, not FOUR,
>> items. Or if syntax is getting to complicated, just min and maxItems.
>>
>>
>>> +      - items:
>>> +          - description:
>>> +              Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
>>> +              The AUX and PMA registers are not part of this range, they are instead
>>> +              included in the associated PHY.
>>> +          - description:
>>> +              Register block of mhdptx sapb registers.
>>> +          - description:
>>> +              Register block for mhdptx DSC encoder registers.
>>>   
>>>     reg-names:
>>> -    minItems: 1
>>> -    items:
>>> -      - const: mhdptx
>>> -      - const: j721e-intg
>>> -      - const: mhdptx-sapb
>>> +    oneOf:
>>> +      - minItems: 2
>>> +      - items:
>>
>> Also wrong.
>>
>>> +          - const: mhdptx
>>> +          - const: j721e-intg
>>> +          - const: mhdptx-sapb
>>> +          - const: dsc
>>> +
>>> +      - minItems: 1
>>> +      - items:
>>> +          - const: mhdptx
>>> +          - const: mhdptx-sapb
>>> +          - const: dsc
>>>   
>>>     clocks:
>>>       maxItems: 1
>>> @@ -100,18 +122,43 @@ allOf:
>>>         properties:
>>>           reg:
>>>             minItems: 2
>>> -          maxItems: 3
>>
>> Your commit msg says you "remove" but here you ADD one more item, thus
>> growing this 3->4.
>>
>> How remove can result in 3 becoming 4?
>>
> Yes, remove is for j721e-intg for cdns,mhdp8546 compatible, and to make
> bindings complete have added dsc reg-blocks, these changes reflects 
> correct capabilities of hardware, have mentioned these in commit message 
> as well.


Again, how a "remove" can result in growing?


Best regards,
Krzysztof

Re: [PATCH v3] dt-bindings: drm/bridge: Update reg-name and reg description list for cdns,mhdp8546 compatible

[Harikrishna shenoy]

On 25/11/25 14:51, Krzysztof Kozlowski wrote:
> On 25/11/2025 06:26, Harikrishna shenoy wrote:
>>
>>
>> On 23/11/25 15:30, Krzysztof Kozlowski wrote:
>>> On Fri, Nov 21, 2025 at 06:04:37PM +0530, Harikrishna Shenoy wrote:
>>>> Remove j721e-intg register name from reg-name list for cdns,mhdp8546
>>>> compatible. The j721e-integ registers are specific to TI SoCs, so they
>>>> are not required for compatibles other than ti,j721e-mhdp8546.
>>>>
>>>> Update reg and reg-names top level constraints with lists according
>>>> to compatibles.
>>>>
>>>> Move the register name constraints and reg description list to the
>>>> appropriate compatibility sections to ensure the correct register
>>>> names are used with each compatible value also adding the DSC register
>>>> to make bindings align with what the hardware supports.
>>>>
>>>> Fixes: 7169d082e7e6 ("dt-bindings: drm/bridge: MHDP8546 bridge binding changes for HDCP")
>>>> Signed-off-by: Harikrishna Shenoy <h-shenoy@ti.com>
>>>> ---
>>>>
>>>> Links to some discussions pointing to need for a fixes patch:
>>>> https://lore.kernel.org/all/20250903220312.GA2903503-robh@kernel.org/
>>>> https://lore.kernel.org/all/d2367789-6b54-4fc2-bb7c-609c0fe084d3@ti.com/
>>>>
>>>> Link to v2:
>>>> <https://lore.kernel.org/all/20251119122447.514729-1-h-shenoy@ti.com/>
>>>>
>>>> Changelog v2 --> v3:
>>>> -Add the reg description list and reg-name list in top level constraints
>>>> using oneOf for either of compatible.
>>>> Logs after testing some cases: https://gist.github.com/h-shenoy/a422f7278859cd95447e674963caabd9
>>>>
>>>> Link to v1:
>>>> <https://lore.kernel.org/all/20251107131535.1841393-1-h-shenoy@ti.com/>
>>>>
>>>> Changelog v1 --> v2:
>>>> -Update the reg description list for each compatible and add register space
>>>> for dsc to make the bindings reflect what hardware supports although
>>>> the driver doesn't support dsc yet.
>>>>
>>>> Note: j721e-integ are not optional registers for ti-compatible.
>>>>
>>>>    .../display/bridge/cdns,mhdp8546.yaml         | 85 ++++++++++++++-----
>>>>    1 file changed, 66 insertions(+), 19 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
>>>> index c2b369456e4e2..632595ef32f63 100644
>>>> --- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
>>>> +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
>>>> @@ -17,23 +17,45 @@ properties:
>>>>          - ti,j721e-mhdp8546
>>>>    
>>>>      reg:
>>>> -    minItems: 1
>>>> -    items:
>>>> -      - description:
>>>> -          Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
>>>> -          The AUX and PMA registers are not part of this range, they are instead
>>>> -          included in the associated PHY.
>>>> -      - description:
>>>> -          Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
>>>> -      - description:
>>>> -          Register block of mhdptx sapb registers.
>>>> +    oneOf:
>>>> +      - minItems: 2
>>>> +      - items:
>>>
>>> This is wrong syntax. You created here a list, so you now allow
>>> anything with minItems 2.
>> Hi Krzysztof,
>>
>> The list defined here restricts what lists are accepted, so for
> 
> No. It does not.
> 
> Look - you defined list of ONLY minItems:2, without anything else. The
> problem is that your oneOf consist of four separate cases and you wanted
> two cases, so only:
> oneOf:
>   - foo
>     whatever goes here
> 
>   - bar
>     further schema
> 
> Not four.

Got it, the minItems should be bound to the oneOF the 2 lists, will 
update that.
Thanks.
> 
>> cdns,mhdp8546 compatible anything more than 3 items is rejected
>> (example:
>> https://gist.github.com/h-shenoy/a422f7278859cd95447e674963caabd9).
>> Could you please help me with an
>> example where you think the bindings are incorrect?
>>
>>>
>>>> +          - description:
>>>> +              Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
>>>> +              The AUX and PMA registers are not part of this range, they are instead
>>>> +              included in the associated PHY.
>>>> +          - description:
>>>> +              Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
>>>> +          - description:
>>>> +              Register block of mhdptx sapb registers.
>>>> +          - description:
>>>> +              Register block for mhdptx DSC encoder registers.
>>>> +
>>>> +      - minItems: 1
>>>
>>> Actually anything with minItems 1... I asked for list of TWO, not FOUR,
>>> items. Or if syntax is getting to complicated, just min and maxItems.
>>>
>>>
>>>> +      - items:
>>>> +          - description:
>>>> +              Register block of mhdptx apb registers up to PHY mapped area (AUX_CONFIG_P).
>>>> +              The AUX and PMA registers are not part of this range, they are instead
>>>> +              included in the associated PHY.
>>>> +          - description:
>>>> +              Register block of mhdptx sapb registers.
>>>> +          - description:
>>>> +              Register block for mhdptx DSC encoder registers.
>>>>    
>>>>      reg-names:
>>>> -    minItems: 1
>>>> -    items:
>>>> -      - const: mhdptx
>>>> -      - const: j721e-intg
>>>> -      - const: mhdptx-sapb
>>>> +    oneOf:
>>>> +      - minItems: 2
>>>> +      - items:
>>>
>>> Also wrong.
>>>
>>>> +          - const: mhdptx
>>>> +          - const: j721e-intg
>>>> +          - const: mhdptx-sapb
>>>> +          - const: dsc
>>>> +
>>>> +      - minItems: 1
>>>> +      - items:
>>>> +          - const: mhdptx
>>>> +          - const: mhdptx-sapb
>>>> +          - const: dsc
>>>>    
>>>>      clocks:
>>>>        maxItems: 1
>>>> @@ -100,18 +122,43 @@ allOf:
>>>>          properties:
>>>>            reg:
>>>>              minItems: 2
>>>> -          maxItems: 3
>>>
>>> Your commit msg says you "remove" but here you ADD one more item, thus
>>> growing this 3->4.
>>>
>>> How remove can result in 3 becoming 4?
>>>
>> Yes, remove is for j721e-intg for cdns,mhdp8546 compatible, and to make
>> bindings complete have added dsc reg-blocks, these changes reflects
>> correct capabilities of hardware, have mentioned these in commit message
>> as well.
> 
> 
> Again, how a "remove" can result in growing?
> 
I am removing the j721e-intg register from non ti compatible that is 
being done via the oneOf and conditionals, the adding part here comes 
from adding the DSC registers space which the hardware supports but 
bindings don't show yet.

Thanks
> 
> Best regards,
> Krzysztof