Re: [PATCH v2 2/9] dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3L SoC

[Krzysztof Kozlowski <krzk@kernel.org>]

On Wed, Feb 04, 2026 at 06:06:18PM +0000, Biju wrote:
> From: Biju Das <biju.das.jz@bp.renesas.com>
> 
> Document RZ/G3L (R9A08G046) IRQC bindings. The IRQC block on RZ/G3L SoC
> is almost identical to one found on the RZ/G3S SoC with the difference
> like it support more External IRQs, GPT Error Interrupts and also has
> additional registers for GPT/MTU IRQ selection, shared IRQ selection
> between external IRQ and TINT. Hence new generic compatible string
> "renesas,r9a08g046-irqc" is added for RZ/G3L SoC.
> 
> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> v1->v2:
>  * Simplified the binding using pattern
> ---
>  .../renesas,rzg2l-irqc.yaml                   | 42 +++++++++++++++----
>  1 file changed, 35 insertions(+), 7 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> index a0b57d808639..311741122b05 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
> @@ -30,7 +30,10 @@ properties:
>                - renesas,r9a08g045-irqc     # RZ/G3S
>            - const: renesas,rzg2l-irqc
>  
> -      - const: renesas,r9a07g043f-irqc     # RZ/Five
> +      - items:

Drop items. The point was to simplify, so just enum.

> +          - enum:
> +              - renesas,r9a07g043f-irqc    # RZ/Five
> +              - renesas,r9a08g046-irqc     # RZ/G3L
>  
>    '#interrupt-cells':
>      description: The first cell should contain a macro RZG2L_{NMI,IRQX} included in the
> @@ -48,17 +51,17 @@ properties:
>  
>    interrupts:
>      minItems: 45
> -    maxItems: 48
> +    maxItems: 61
>  
>    interrupt-names:
>      minItems: 45
> -    maxItems: 48
> +    maxItems: 61
>      items:
>        oneOf:
>          - description: NMI interrupt
>            const: nmi
>          - description: External IRQ interrupt
> -          pattern: '^irq([0-7])$'
> +          pattern: '^irq([0-9]|1[0-5])$'
>          - description: GPIO interrupt
>            pattern: '^tint([0-9]|1[0-9]|2[0-9]|3[0-1])$'
>          - description: Bus error interrupt
> @@ -75,6 +78,8 @@ properties:
>            const: ec7tie2-1
>          - description: ECCRAM1 error overflow interrupt
>            const: ec7tiovf-1
> +        - description: Integrated GPT Error interrupt
> +          pattern: '^ovfunf([0-7])$'
>  
>    clocks:
>      maxItems: 2
> @@ -106,6 +111,22 @@ required:
>  allOf:
>    - $ref: /schemas/interrupt-controller.yaml#
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - renesas,r9a07g043f-irqc
> +              - renesas,r9a07g043u-irqc
> +              - renesas,r9a07g044-irqc
> +              - renesas,r9a07g054-irqc
> +    then:
> +      properties:
> +        interrupts:

Missing minitems. Previously it was not 45, was it?

> +          maxItems: 48
> +        interrupt-names:
> +          maxItems: 48
> +
>    - if:
>        properties:
>          compatible:
> @@ -118,12 +139,19 @@ allOf:
>            maxItems: 45
>          interrupt-names:
>            maxItems: 45
> -    else:
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - renesas,r9a08g046-irqc
> +    then:
>        properties:
>          interrupts:
> -          minItems: 48
> +          maxItems: 61

minItems instead. Just like it was in the old code.

Best regards,
Krzysztof