From: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
To: broonie@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org
Cc: mohammad.rafi.shaik@oss.qualcomm.com,
linux-sound@vger.kernel.org, lgirdwood@gmail.com, perex@perex.cz,
tiwai@suse.com, johan@kernel.org,
dmitry.baryshkov@oss.qualcomm.com,
konrad.dybcio@oss.qualcomm.com, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
srini@kernel.org, val@packett.cool, mailingradian@gmail.com,
Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Subject: [PATCH v9 09/13] ASoC: qcom: q6dsp: Add Senary MI2S audio interface support
Date: Thu, 2 Apr 2026 08:11:14 +0000 [thread overview]
Message-ID: <20260402081118.348071-10-srinivas.kandagatla@oss.qualcomm.com> (raw)
In-Reply-To: <20260402081118.348071-1-srinivas.kandagatla@oss.qualcomm.com>
From: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Introduces support for the Senary MI2S audio interface in the Qualcomm
q6dsp. Add new AFE port IDs for Senary MI2S RX and TX and include the
necessary mappings in the port configuration to allow audio routing
over the Senary MI2S interface.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool> # sm7325-motorola-dubai
---
sound/soc/qcom/qdsp6/q6afe-dai.c | 6 +++++
sound/soc/qcom/qdsp6/q6afe.c | 8 +++++++
sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 29 ++++++++++++++++++++++++
3 files changed, 43 insertions(+)
diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c
index 0f47aadaabe1..a0d21034a626 100644
--- a/sound/soc/qcom/qdsp6/q6afe-dai.c
+++ b/sound/soc/qcom/qdsp6/q6afe-dai.c
@@ -409,6 +409,7 @@ static int q6afe_dai_prepare(struct snd_pcm_substream *substream,
q6afe_slim_port_prepare(dai_data->port[dai->id],
&dai_data->port_config[dai->id].slim);
break;
+ case SENARY_MI2S_RX ... SENARY_MI2S_TX:
case QUINARY_MI2S_RX ... QUINARY_MI2S_TX:
case PRIMARY_MI2S_RX ... QUATERNARY_MI2S_TX:
rc = q6afe_i2s_port_prepare(dai_data->port[dai->id],
@@ -540,6 +541,7 @@ static const struct snd_soc_dapm_route q6afe_dapm_routes[] = {
{"Tertiary MI2S Playback", NULL, "TERT_MI2S_RX"},
{"Quaternary MI2S Playback", NULL, "QUAT_MI2S_RX"},
{"Quinary MI2S Playback", NULL, "QUIN_MI2S_RX"},
+ {"Senary MI2S Playback", NULL, "SEN_MI2S_RX"},
{"Primary TDM0 Playback", NULL, "PRIMARY_TDM_RX_0"},
{"Primary TDM1 Playback", NULL, "PRIMARY_TDM_RX_1"},
@@ -636,6 +638,7 @@ static const struct snd_soc_dapm_route q6afe_dapm_routes[] = {
{"SEC_MI2S_TX", NULL, "Secondary MI2S Capture"},
{"QUAT_MI2S_TX", NULL, "Quaternary MI2S Capture"},
{"QUIN_MI2S_TX", NULL, "Quinary MI2S Capture"},
+ {"SEN_MI2S_TX", NULL, "Senary MI2S Capture"},
{"WSA_CODEC_DMA_RX_0 Playback", NULL, "WSA_CODEC_DMA_RX_0"},
{"WSA_CODEC_DMA_TX_0", NULL, "WSA_CODEC_DMA_TX_0 Capture"},
@@ -770,6 +773,8 @@ static const struct snd_soc_dapm_widget q6afe_dai_widgets[] = {
SND_SOC_DAPM_AIF_OUT("SLIMBUS_4_TX", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("SLIMBUS_5_TX", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("SLIMBUS_6_TX", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_IN("SEN_MI2S_RX", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_AIF_OUT("SEN_MI2S_TX", NULL, 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_IN("QUIN_MI2S_RX", NULL,
0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("QUIN_MI2S_TX", NULL,
@@ -1037,6 +1042,7 @@ static void of_q6afe_parse_dai_data(struct device *dev,
switch (id) {
/* MI2S specific properties */
+ case SENARY_MI2S_RX ... SENARY_MI2S_TX:
case QUINARY_MI2S_RX ... QUINARY_MI2S_TX:
case PRIMARY_MI2S_RX ... QUATERNARY_MI2S_TX:
priv = &data->priv[id];
diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c
index 43d877322bae..40237267fda0 100644
--- a/sound/soc/qcom/qdsp6/q6afe.c
+++ b/sound/soc/qcom/qdsp6/q6afe.c
@@ -130,6 +130,8 @@
#define AFE_PORT_ID_QUATERNARY_MI2S_TX 0x1007
#define AFE_PORT_ID_QUINARY_MI2S_RX 0x1016
#define AFE_PORT_ID_QUINARY_MI2S_TX 0x1017
+#define AFE_PORT_ID_SENARY_MI2S_RX 0x1018
+#define AFE_PORT_ID_SENARY_MI2S_TX 0x1019
/* Start of the range of port IDs for TDM devices. */
#define AFE_PORT_ID_TDM_PORT_RANGE_START 0x9000
@@ -718,6 +720,10 @@ static struct afe_port_map port_maps[AFE_PORT_MAX] = {
QUINARY_MI2S_RX, 1, 1},
[QUINARY_MI2S_TX] = { AFE_PORT_ID_QUINARY_MI2S_TX,
QUINARY_MI2S_TX, 0, 1},
+ [SENARY_MI2S_RX] = { AFE_PORT_ID_SENARY_MI2S_RX,
+ SENARY_MI2S_RX, 1, 1},
+ [SENARY_MI2S_TX] = { AFE_PORT_ID_SENARY_MI2S_TX,
+ SENARY_MI2S_TX, 0, 1},
[PRIMARY_TDM_RX_0] = { AFE_PORT_ID_PRIMARY_TDM_RX,
PRIMARY_TDM_RX_0, 1, 1},
[PRIMARY_TDM_TX_0] = { AFE_PORT_ID_PRIMARY_TDM_TX,
@@ -1777,6 +1783,8 @@ struct q6afe_port *q6afe_port_get_from_id(struct device *dev, int id)
case AFE_PORT_ID_QUATERNARY_MI2S_TX:
case AFE_PORT_ID_QUINARY_MI2S_RX:
case AFE_PORT_ID_QUINARY_MI2S_TX:
+ case AFE_PORT_ID_SENARY_MI2S_RX:
+ case AFE_PORT_ID_SENARY_MI2S_TX:
cfg_type = AFE_PARAM_ID_I2S_CONFIG;
break;
case AFE_PORT_ID_PRIMARY_TDM_RX ... AFE_PORT_ID_QUINARY_TDM_TX_7:
diff --git a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c b/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
index d31388ed3ccf..e5cd82f77b55 100644
--- a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
+++ b/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
@@ -519,6 +519,34 @@ static struct snd_soc_dai_driver q6dsp_audio_fe_dais[] = {
},
.id = QUINARY_MI2S_TX,
.name = "QUIN_MI2S_TX",
+ }, {
+ .playback = {
+ .stream_name = "Senary MI2S Playback",
+ .rates = SNDRV_PCM_RATE_8000_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_LE |
+ SNDRV_PCM_FMTBIT_S32_LE,
+ .channels_min = 1,
+ .channels_max = 8,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ },
+ .id = SENARY_MI2S_RX,
+ .name = "SEN_MI2S_RX",
+ }, {
+ .capture = {
+ .stream_name = "Senary MI2S Capture",
+ .rates = SNDRV_PCM_RATE_8000_192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S24_LE |
+ SNDRV_PCM_FMTBIT_S32_LE,
+ .channels_min = 1,
+ .channels_max = 8,
+ .rate_min = 8000,
+ .rate_max = 192000,
+ },
+ .id = SENARY_MI2S_TX,
+ .name = "SEN_MI2S_TX",
},
Q6AFE_MI2S_RX_DAI("LPI RX0", LPI_MI2S_RX_0),
Q6AFE_MI2S_RX_DAI("LPI RX1", LPI_MI2S_RX_1),
@@ -680,6 +708,7 @@ struct snd_soc_dai_driver *q6dsp_audio_ports_set_config(struct device *dev,
case SLIMBUS_0_RX ... SLIMBUS_6_TX:
q6dsp_audio_fe_dais[i].ops = cfg->q6slim_ops;
break;
+ case SENARY_MI2S_RX ... SENARY_MI2S_TX:
case QUINARY_MI2S_RX ... QUINARY_MI2S_TX:
case PRIMARY_MI2S_RX ... QUATERNARY_MI2S_TX:
case LPI_MI2S_RX_0 ... LPI_MI2S_TX_4:
--
2.47.3
next prev parent reply other threads:[~2026-04-02 8:11 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-02 8:11 [PATCH v9 00/13] ASoC: qcom: q6dsp: few fixes and enhancements Srinivas Kandagatla
2026-04-02 8:11 ` [PATCH v9 01/13] ASoC: qcom: q6apm: move component registration to unmanaged version Srinivas Kandagatla
2026-04-02 8:11 ` [PATCH v9 02/13] ASoC: qcom: q6apm: remove child devices when apm is removed Srinivas Kandagatla
2026-04-02 8:11 ` [PATCH v9 03/13] ASoC: qcom: qdsp6: topology: check widget type before accessing data Srinivas Kandagatla
2026-04-02 8:11 ` [PATCH v9 04/13] ASoC: qcom: q6apm-lpass-dai: Fix multiple graph opens Srinivas Kandagatla
2026-04-02 8:11 ` [PATCH v9 05/13] ASoC: qcom: q6apm-dai: reset queue ptr on trigger stop Srinivas Kandagatla
2026-04-02 8:11 ` [PATCH v9 06/13] ASoC: dt-bindings: qcom: add LPASS LPI MI2S dai ids Srinivas Kandagatla
2026-04-02 8:11 ` [PATCH v9 07/13] ASoC: qcom: common: validate cpu dai id during parsing Srinivas Kandagatla
2026-04-02 8:11 ` [PATCH v9 08/13] ASoC: qcom: qdsp6: lpass-ports: add support for LPASS LPI MI2S dais Srinivas Kandagatla
2026-04-02 8:11 ` Srinivas Kandagatla [this message]
2026-04-02 8:11 ` [PATCH v9 10/13] ASoC: qcom: qdapm-lpass-dai: correct the error message Srinivas Kandagatla
2026-04-02 8:11 ` [PATCH v9 11/13] ASoC: qcom: q6apm-lpass-dai: move graph start to trigger Srinivas Kandagatla
2026-04-02 8:11 ` [PATCH v9 12/13] ASoC: qcom: qdsp6: remove search for module iid in hot path Srinivas Kandagatla
2026-04-02 8:11 ` [PATCH v9 13/13] ASoC: qcom: q6apm: Add support for early buffer mapping on DSP Srinivas Kandagatla
2026-05-12 5:09 ` Jens Glathe
2026-05-12 8:27 ` Srinivas Kandagatla
2026-05-12 11:43 ` Srinivas Kandagatla
2026-05-12 13:07 ` Jens Glathe
2026-04-02 15:35 ` [PATCH v9 00/13] ASoC: qcom: q6dsp: few fixes and enhancements Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260402081118.348071-10-srinivas.kandagatla@oss.qualcomm.com \
--to=srinivas.kandagatla@oss.qualcomm.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=johan@kernel.org \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=mailingradian@gmail.com \
--cc=mohammad.rafi.shaik@oss.qualcomm.com \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=srini@kernel.org \
--cc=tiwai@suse.com \
--cc=val@packett.cool \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox