[PATCH v9 08/13] ASoC: qcom: qdsp6: lpass-ports: add support for LPASS LPI MI2S dais

[Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>]

Add support for LPASS LPI MI2S dais in the dai-driver, these dais are
used in Monaco based platform devices.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
---
 sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 47 ++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c b/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
index 4eed54b071a5..d31388ed3ccf 100644
--- a/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
+++ b/sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c
@@ -96,6 +96,42 @@
 		.id = did,						\
 	}
 
+#define Q6AFE_MI2S_RX_DAI(pre, did) {				\
+		.playback = {						\
+			.stream_name = pre" MI2S Playback",	\
+			.rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\
+				SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000 |\
+				SNDRV_PCM_RATE_176400,			\
+			.formats = SNDRV_PCM_FMTBIT_S16_LE |		\
+				   SNDRV_PCM_FMTBIT_S24_LE |		\
+				   SNDRV_PCM_FMTBIT_S32_LE,		\
+			.channels_min = 1,				\
+			.channels_max = 8,				\
+			.rate_min = 8000,				\
+			.rate_max = 176400,				\
+		},							\
+		.name = #did,						\
+		.id = did,						\
+	}
+
+#define Q6AFE_MI2S_TX_DAI(pre, did) {				\
+		.capture = {						\
+			.stream_name = pre" MI2S Capture",	\
+			.rates = SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\
+				SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_48000 |\
+				SNDRV_PCM_RATE_176400,			\
+			.formats = SNDRV_PCM_FMTBIT_S16_LE |		\
+				   SNDRV_PCM_FMTBIT_S24_LE |		\
+				   SNDRV_PCM_FMTBIT_S32_LE,		\
+			.channels_min = 1,				\
+			.channels_max = 8,				\
+			.rate_min = 8000,				\
+			.rate_max = 176400,				\
+		},							\
+		.name = #did,						\
+		.id = did,						\
+	}
+
 static struct snd_soc_dai_driver q6dsp_audio_fe_dais[] = {
 	{
 		.playback = {
@@ -484,6 +520,16 @@ static struct snd_soc_dai_driver q6dsp_audio_fe_dais[] = {
 		.id = QUINARY_MI2S_TX,
 		.name = "QUIN_MI2S_TX",
 	},
+	Q6AFE_MI2S_RX_DAI("LPI RX0", LPI_MI2S_RX_0),
+	Q6AFE_MI2S_RX_DAI("LPI RX1", LPI_MI2S_RX_1),
+	Q6AFE_MI2S_RX_DAI("LPI RX2", LPI_MI2S_RX_2),
+	Q6AFE_MI2S_RX_DAI("LPI RX3", LPI_MI2S_RX_3),
+	Q6AFE_MI2S_RX_DAI("LPI RX4", LPI_MI2S_RX_4),
+	Q6AFE_MI2S_TX_DAI("LPI TX0", LPI_MI2S_TX_0),
+	Q6AFE_MI2S_TX_DAI("LPI TX1", LPI_MI2S_TX_1),
+	Q6AFE_MI2S_TX_DAI("LPI TX2", LPI_MI2S_TX_2),
+	Q6AFE_MI2S_TX_DAI("LPI TX3", LPI_MI2S_TX_3),
+	Q6AFE_MI2S_TX_DAI("LPI TX4", LPI_MI2S_TX_4),
 	Q6AFE_TDM_PB_DAI("Primary", 0, PRIMARY_TDM_RX_0),
 	Q6AFE_TDM_PB_DAI("Primary", 1, PRIMARY_TDM_RX_1),
 	Q6AFE_TDM_PB_DAI("Primary", 2, PRIMARY_TDM_RX_2),
@@ -636,6 +682,7 @@ struct snd_soc_dai_driver *q6dsp_audio_ports_set_config(struct device *dev,
 			break;
 		case QUINARY_MI2S_RX ... QUINARY_MI2S_TX:
 		case PRIMARY_MI2S_RX ... QUATERNARY_MI2S_TX:
+		case LPI_MI2S_RX_0 ... LPI_MI2S_TX_4:
 			q6dsp_audio_fe_dais[i].ops = cfg->q6i2s_ops;
 			break;
 		case PRIMARY_TDM_RX_0 ... QUINARY_TDM_TX_7:
-- 
2.47.3