[PATCH 06/11] media: iris: Fix VM count passed to firmware

[Vishnu Reddy <busanna.reddy@oss.qualcomm.com>]

On Glymur, firmware interprets the value written to CPU_CS_SCIACMDARG3 as
the number of virtual machines (VMs) and internally adds 1 to it. Writing
1 causes firmware to treat it as 2 VMs. Since only one VM is required,
remove this write to leave the register at its reset value of 0. This does
not affect other platforms as only Glymur firmware uses this register,
earlier platform firmwares ignore it.

Fixes: abf5bac63f68a ("media: iris: implement the boot sequence of the firmware")
Cc: stable@vger.kernel.org
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
---
 drivers/media/platform/qcom/iris/iris_vpu_common.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/media/platform/qcom/iris/iris_vpu_common.c b/drivers/media/platform/qcom/iris/iris_vpu_common.c
index 548e5f1727fd..bfd1e762c38e 100644
--- a/drivers/media/platform/qcom/iris/iris_vpu_common.c
+++ b/drivers/media/platform/qcom/iris/iris_vpu_common.c
@@ -78,7 +78,6 @@ int iris_vpu_boot_firmware(struct iris_core *core)
 	iris_vpu_setup_ucregion_memory_map(core);
 
 	writel(ctrl_init, core->reg_base + CTRL_INIT);
-	writel(0x1, core->reg_base + CPU_CS_SCIACMDARG3);
 
 	while (!ctrl_status && count < max_tries) {
 		ctrl_status = readl(core->reg_base + CTRL_STATUS);

-- 
2.34.1