From: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Bryan O'Donoghue <bod@kernel.org>,
Vikash Garodia <vikash.garodia@oss.qualcomm.com>,
Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>,
Abhinav Kumar <abhinav.kumar@linux.dev>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Stefan Schmidt <stefan.schmidt@linaro.org>,
Hans Verkuil <hverkuil@kernel.org>,
linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
iommu@lists.linux.dev
Subject: Re: [PATCH 01/11] dt-bindings: media: qcom,glymur-iris: Add glymur video codec
Date: Tue, 14 Apr 2026 15:16:53 +0530 [thread overview]
Message-ID: <9ac01a3a-1ce2-373d-33be-1c10853604c3@oss.qualcomm.com> (raw)
In-Reply-To: <20260414-lush-reindeer-of-storm-bbe918@quoll>
On 4/14/2026 12:55 PM, Krzysztof Kozlowski wrote:
> On Tue, Apr 14, 2026 at 10:29:57AM +0530, Vishnu Reddy wrote:
>> Add device tree binding for the Qualcomm Glymur Iris video codec. Glymur
>> is a new generation of video IP that introduces a dual-core architecture.
>> The second core brings its own power domain, clocks, and reset lines,
>> requiring additional power domains and clocks in the power sequence.
>>
>> Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
>> ---
>> .../bindings/media/qcom,glymur-iris.yaml | 220 +++++++++++++++++++++
>> include/dt-bindings/media/qcom,glymur-iris.h | 11 ++
>> 2 files changed, 231 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/media/qcom,glymur-iris.yaml b/Documentation/devicetree/bindings/media/qcom,glymur-iris.yaml
>> new file mode 100644
>> index 000000000000..10ee02cd1a7d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/qcom,glymur-iris.yaml
>> @@ -0,0 +1,220 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/qcom,glymur-iris.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Glymur SoC Iris video encoder and decoder
>> +
>> +maintainers:
>> + - Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
>> +
>> +description:
>> + The Iris video processing unit on Qualcomm Glymur SoC is a video encode and
>> + decode accelerator.
>> +
>> +properties:
>> + compatible:
>> + const: qcom,glymur-iris
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + maxItems: 9
>> +
>> + clock-names:
>> + items:
>> + - const: iface
>> + - const: core
>> + - const: vcodec0_core
> iface1 goes here
> core_freerun
> vcodec0_core_freerun
> and the rest, based on sm8750. Or which previous variant did you use as
> the base?
Ack, will use sm8750 as base and I'll update.
Thanks for the suggestion.
>
>> + - const: iface_ctrl
>> + - const: core_freerun
>> + - const: vcodec0_core_freerun
>> + - const: iface1
>> + - const: vcodec1_core
>> + - const: vcodec1_core_freerun
>> +
>> + dma-coherent: true
>> +
>> + firmware-name:
>> + maxItems: 1
>> +
>> + interconnects:
>> + maxItems: 2
>> +
>> + interconnect-names:
>> + items:
>> + - const: cpu-cfg
>> + - const: video-mem
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + iommus:
>> + maxItems: 4
>> +
>> + iommu-map:
>> + maxItems: 1
>> +
>> + memory-region:
>> + maxItems: 1
>> +
>> + operating-points-v2: true
>> + opp-table:
>> + type: object
>> +
>> + power-domains:
>> + maxItems: 5
>> +
>> + power-domain-names:
>> + items:
>> + - const: venus
>> + - const: vcodec0
>> + - const: mxc
>> + - const: mmcx
>> + - const: vcodec1
>> +
>> + resets:
>> + maxItems: 6
>> +
>> + reset-names:
>> + items:
>> + - const: bus0
> bus1
> core
> vcodec0_core
Ack
>
>> + - const: bus_ctrl
>
>> + - const: core
>> + - const: vcodec0_core
>> + - const: bus1
>> + - const: vcodec1_core
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - clocks
>> + - clock-names
>> + - dma-coherent
>> + - interconnects
>> + - interconnect-names
>> + - interrupts
>> + - iommus
>> + - memory-region
>> + - power-domains
>> + - power-domain-names
>> + - resets
>> + - reset-names
>> +
>> +unevaluatedProperties: false
> Use existing, most recent code as starting point.
Ack, will use sm8750.
>
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>> + #include <dt-bindings/media/qcom,glymur-iris.h>
>> + #include <dt-bindings/power/qcom,rpmhpd.h>
>> +
>> + video-codec@aa00000 {
>> + compatible = "qcom,glymur-iris";
>> + reg = <0x0aa00000 0xf0000>;
>> +
>> + clocks = <&gcc_video_axi0_clk>,
>> + <&videocc_mvs0c_clk>,
>> + <&videocc_mvs0_clk>,
>> + <&gcc_video_axi0c_clk>,
>> + <&videocc_mvs0c_freerun_clk>,
>> + <&videocc_mvs0_freerun_clk>,
>> + <&gcc_video_axi1_clk>,
>> + <&videocc_mvs1_clk>,
>> + <&videocc_mvs1_freerun_clk>;
>> + clock-names = "iface",
>> + "core",
>> + "vcodec0_core",
>> + "iface_ctrl",
>> + "core_freerun",
>> + "vcodec0_core_freerun",
>> + "iface1",
>> + "vcodec1_core",
>> + "vcodec1_core_freerun";
>> +
>> + dma-coherent;
>> +
>> + interconnects = <&hsc_noc_master_appss_proc &config_noc_slave_venus_cfg>,
>> + <&mmss_noc_master_video &mc_virt_slave_ebi1>;
>> + interconnect-names = "cpu-cfg",
>> + "video-mem";
>> +
>> + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> + iommus = <&apps_smmu 0x1940 0x0>,
>> + <&apps_smmu 0x1943 0x0>,
>> + <&apps_smmu 0x1944 0x0>,
>> + <&apps_smmu 0x19e0 0x0>;
>> +
>> + iommu-map = <IRIS_FIRMWARE &apps_smmu 0x19e2 0x1>;
>> +
>> + memory-region = <&video_mem>;
>> +
>> + operating-points-v2 = <&iris_opp_table>;
>> +
>> + power-domains = <&videocc_mvs0c_gdsc>,
>> + <&videocc_mvs0_gdsc>,
>> + <&rpmhpd RPMHPD_MXC>,
>> + <&rpmhpd RPMHPD_MMCX>,
>> + <&videocc_mvs1_gdsc>;
>> + power-domain-names = "venus",
>> + "vcodec0",
>> + "mxc",
>> + "mmcx",
>> + "vcodec1";
>> +
>> + resets = <&gcc_video_axi0_clk_ares>,
>> + <&gcc_video_axi0c_clk_ares>,
>> + <&videocc_mvs0c_freerun_clk_ares>,
>> + <&videocc_mvs0_freerun_clk_ares>,
>> + <&gcc_video_axi1_clk_ares>,
>> + <&videocc_mvs1_freerun_clk_ares>;
>> + reset-names = "bus0",
>> + "bus_ctrl",
>> + "core",
>> + "vcodec0_core",
>> + "bus1",
>> + "vcodec1_core";
>> +
>> + iris_opp_table: opp-table {
>> + compatible = "operating-points-v2";
>> +
>> + opp-240000000 {
>> + opp-hz = /bits/ 64 <240000000 240000000 360000000>;
>> + required-opps = <&rpmhpd_opp_svs>,
>> + <&rpmhpd_opp_low_svs>;
>> + };
>> +
>> + opp-338000000 {
>> + opp-hz = /bits/ 64 <338000000 338000000 507000000>;
>> + required-opps = <&rpmhpd_opp_svs>,
>> + <&rpmhpd_opp_svs>;
>> + };
>> +
>> + opp-366000000 {
>> + opp-hz = /bits/ 64 <366000000 366000000 549000000>;
>> + required-opps = <&rpmhpd_opp_svs_l1>,
>> + <&rpmhpd_opp_svs_l1>;
>> + };
>> +
>> + opp-444000000 {
>> + opp-hz = /bits/ 64 <444000000 444000000 666000000>;
>> + required-opps = <&rpmhpd_opp_svs_l1>,
>> + <&rpmhpd_opp_nom>;
>> + };
>> +
>> + opp-533333334 {
>> + opp-hz = /bits/ 64 <533333334 533333334 800000000>;
>> + required-opps = <&rpmhpd_opp_svs_l1>,
>> + <&rpmhpd_opp_turbo>;
>> + };
>> +
>> + opp-655000000 {
>> + opp-hz = /bits/ 64 <655000000 655000000 982000000>;
>> + required-opps = <&rpmhpd_opp_nom>,
>> + <&rpmhpd_opp_turbo_l1>;
>> + };
>> + };
>> + };
>> diff --git a/include/dt-bindings/media/qcom,glymur-iris.h b/include/dt-bindings/media/qcom,glymur-iris.h
>> new file mode 100644
>> index 000000000000..5766db0b9247
>> --- /dev/null
>> +++ b/include/dt-bindings/media/qcom,glymur-iris.h
>> @@ -0,0 +1,11 @@
>> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
>> +/*
>> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
>> + */
>> +
>> +#ifndef _DT_BINDINGS_MEDIA_QCOM_GLYMUR_IRIS_H_
>> +#define _DT_BINDINGS_MEDIA_QCOM_GLYMUR_IRIS_H_
>> +
>> +#define IRIS_FIRMWARE 0
> For what is this define? IOMMU map? Binding is quiet about it, so
> probably this should have some prefix to make it obvious.
> IOMMU_? DEV_? What does this define express?
It's a function ID. I'll add prefix like this IOMMU_FID_IRIS_FIRMWARE.
Thanks,
Vishnu Reddy
>
> Best regards,
> Krzysztof
>
next prev parent reply other threads:[~2026-04-14 9:47 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-14 4:59 [PATCH 00/11] media: iris: Add support for glymur platform Vishnu Reddy
2026-04-14 4:59 ` [PATCH 01/11] dt-bindings: media: qcom,glymur-iris: Add glymur video codec Vishnu Reddy
2026-04-14 7:25 ` Krzysztof Kozlowski
2026-04-14 9:46 ` Vishnu Reddy [this message]
2026-04-14 4:59 ` [PATCH 02/11] media: iris: Add iris vpu bus support and register it with iommu_buses Vishnu Reddy
2026-04-14 15:14 ` Dmitry Baryshkov
[not found] ` <5dee6da0-9170-d9e0-5ff7-f8436331c6a9@oss.qualcomm.com>
2026-04-17 14:59 ` Vishnu Reddy
2026-04-17 18:19 ` Dmitry Baryshkov
2026-04-20 14:02 ` Vishnu Reddy
2026-04-20 17:56 ` Dmitry Baryshkov
2026-04-14 4:59 ` [PATCH 03/11] media: iris: Add context bank hooks for platform specific initialization Vishnu Reddy
2026-04-14 15:16 ` Dmitry Baryshkov
2026-04-17 15:03 ` Vishnu Reddy
2026-04-14 5:00 ` [PATCH 04/11] media: iris: Add helper to create a context bank device on iris vpu bus Vishnu Reddy
2026-04-14 15:18 ` Dmitry Baryshkov
2026-04-17 15:19 ` Vishnu Reddy
2026-04-17 18:23 ` Dmitry Baryshkov
2026-04-20 14:03 ` Vishnu Reddy
2026-04-20 17:56 ` Dmitry Baryshkov
2026-04-22 6:19 ` Vishnu Reddy
2026-04-14 5:00 ` [PATCH 05/11] media: iris: Enable Secure PAS support with IOMMU managed by Linux Vishnu Reddy
2026-04-14 6:31 ` Mukesh Ojha
2026-04-14 9:33 ` Mukesh Ojha
2026-04-15 7:36 ` Mukesh Ojha
2026-04-15 7:41 ` Mukesh Ojha
2026-04-17 15:20 ` Vishnu Reddy
2026-04-14 14:09 ` Konrad Dybcio
2026-04-17 15:27 ` Vishnu Reddy
2026-04-14 5:00 ` [PATCH 06/11] media: iris: Fix VM count passed to firmware Vishnu Reddy
2026-04-14 6:33 ` Mukesh Ojha
2026-04-17 15:28 ` Vishnu Reddy
2026-04-14 9:29 ` Konrad Dybcio
2026-04-17 14:35 ` Vishnu Reddy
2026-04-14 15:20 ` Dmitry Baryshkov
2026-04-17 15:29 ` Vishnu Reddy
2026-04-22 7:37 ` Vikash Garodia
2026-04-14 5:00 ` [PATCH 07/11] media: iris: Rename clock and power domain macros to use vcodec prefix Vishnu Reddy
2026-04-14 6:38 ` Mukesh Ojha
2026-04-14 7:20 ` Vishnu Reddy
2026-04-14 5:00 ` [PATCH 08/11] media: iris: Add power sequence for Glymur Vishnu Reddy
2026-04-14 9:49 ` Konrad Dybcio
2026-04-17 16:04 ` Vishnu Reddy
2026-04-14 15:23 ` Dmitry Baryshkov
2026-04-14 5:00 ` [PATCH 09/11] media: iris: Add support to select core for dual core platforms Vishnu Reddy
2026-04-14 9:51 ` Konrad Dybcio
2026-04-17 15:36 ` Vishnu Reddy
2026-04-14 16:02 ` Dmitry Baryshkov
2026-04-22 6:04 ` Vikash Garodia
2026-04-14 5:00 ` [PATCH 10/11] media: iris: Add platform data for glymur Vishnu Reddy
2026-04-14 16:05 ` Dmitry Baryshkov
2026-04-17 15:52 ` Vishnu Reddy
2026-04-14 5:00 ` [PATCH 11/11] arm64: dts: qcom: glymur: Add iris video node Vishnu Reddy
2026-04-14 14:10 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9ac01a3a-1ce2-373d-33be-1c10853604c3@oss.qualcomm.com \
--to=busanna.reddy@oss.qualcomm.com \
--cc=abhinav.kumar@linux.dev \
--cc=andersson@kernel.org \
--cc=bod@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dikshita.agarwal@oss.qualcomm.com \
--cc=hverkuil@kernel.org \
--cc=iommu@lists.linux.dev \
--cc=joro@8bytes.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=robin.murphy@arm.com \
--cc=stefan.schmidt@linaro.org \
--cc=vikash.garodia@oss.qualcomm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox