* [PATCH v7 1/6] dt-bindings: arm: rockchip: Add Orange Pi 5 Pro
2026-04-14 21:40 [PATCH v7 0/6] Add support for Orange Pi 5 Pro Dennis Gilmore
@ 2026-04-14 21:40 ` Dennis Gilmore
2026-04-14 21:40 ` [PATCH v7 2/6] dt-bindings: display: bridge: simple: document the Lontium LT8711UXD DP-to-HDMI bridge Dennis Gilmore
` (4 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Dennis Gilmore @ 2026-04-14 21:40 UTC (permalink / raw)
Cc: Alexey Charkov, Andrew Lunn, Andrzej Hajda, Chaoyi Chen,
Conor Dooley, David Airlie, Dennis Gilmore, devicetree, dri-devel,
FUKAUMI Naoki, Heiko Stuebner, Hsun Lai, Jernej Skrabec,
Jimmy Hon, John Clark, Jonas Karlman, Krzysztof Kozlowski,
Laurent Pinchart, linux-arm-kernel, linux-kernel, linux-rockchip,
Maarten Lankhorst, Maxime Ripard, Michael Opdenacker,
Michael Riesch, Mykola Kvach, Neil Armstrong, Peter Robinson,
Quentin Schulz, Robert Foss, Rob Herring, Simona Vetter,
Thomas Zimmermann, Krzysztof Kozlowski
Add compatible string for the Orange Pi 5 Pro.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
---
Documentation/devicetree/bindings/arm/rockchip.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index ae77ded9fe47..3c6b83a84463 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -1320,6 +1320,7 @@ properties:
items:
- enum:
- xunlong,orangepi-5
+ - xunlong,orangepi-5-pro
- xunlong,orangepi-5b
- const: rockchip,rk3588s
--
2.53.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v7 2/6] dt-bindings: display: bridge: simple: document the Lontium LT8711UXD DP-to-HDMI bridge
2026-04-14 21:40 [PATCH v7 0/6] Add support for Orange Pi 5 Pro Dennis Gilmore
2026-04-14 21:40 ` [PATCH v7 1/6] dt-bindings: arm: rockchip: Add " Dennis Gilmore
@ 2026-04-14 21:40 ` Dennis Gilmore
2026-04-15 6:57 ` Krzysztof Kozlowski
2026-04-14 21:40 ` [PATCH v7 3/6] drm/bridge: simple: Add " Dennis Gilmore
` (3 subsequent siblings)
5 siblings, 1 reply; 11+ messages in thread
From: Dennis Gilmore @ 2026-04-14 21:40 UTC (permalink / raw)
Cc: Alexey Charkov, Andrew Lunn, Andrzej Hajda, Chaoyi Chen,
Conor Dooley, David Airlie, Dennis Gilmore, devicetree, dri-devel,
FUKAUMI Naoki, Heiko Stuebner, Hsun Lai, Jernej Skrabec,
Jimmy Hon, John Clark, Jonas Karlman, Krzysztof Kozlowski,
Laurent Pinchart, linux-arm-kernel, linux-kernel, linux-rockchip,
Maarten Lankhorst, Maxime Ripard, Michael Opdenacker,
Michael Riesch, Mykola Kvach, Neil Armstrong, Peter Robinson,
Quentin Schulz, Robert Foss, Rob Herring, Simona Vetter,
Thomas Zimmermann
The Lontium LT8711UXD is a high performance two lane Type-C/DP1.4
to HDMI2.0 converter, designed to connect a USB Type-C source or
a DP1.4 source to an HDMI2.0 sink.
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
---
.../devicetree/bindings/display/bridge/simple-bridge.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
index e6808419f625..752c736c8f85 100644
--- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
@@ -30,6 +30,7 @@ properties:
- algoltek,ag6311
- asl-tek,cs5263
- dumb-vga-dac
+ - lontium,lt8711uxd
- parade,ps185hdm
- radxa,ra620
- realtek,rtd2171
--
2.53.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v7 2/6] dt-bindings: display: bridge: simple: document the Lontium LT8711UXD DP-to-HDMI bridge
2026-04-14 21:40 ` [PATCH v7 2/6] dt-bindings: display: bridge: simple: document the Lontium LT8711UXD DP-to-HDMI bridge Dennis Gilmore
@ 2026-04-15 6:57 ` Krzysztof Kozlowski
0 siblings, 0 replies; 11+ messages in thread
From: Krzysztof Kozlowski @ 2026-04-15 6:57 UTC (permalink / raw)
To: Dennis Gilmore
Cc: Alexey Charkov, Andrew Lunn, Andrzej Hajda, Chaoyi Chen,
Conor Dooley, David Airlie, devicetree, dri-devel, FUKAUMI Naoki,
Heiko Stuebner, Hsun Lai, Jernej Skrabec, Jimmy Hon, John Clark,
Jonas Karlman, Krzysztof Kozlowski, Laurent Pinchart,
linux-arm-kernel, linux-kernel, linux-rockchip, Maarten Lankhorst,
Maxime Ripard, Michael Opdenacker, Michael Riesch, Mykola Kvach,
Neil Armstrong, Peter Robinson, Quentin Schulz, Robert Foss,
Rob Herring, Simona Vetter, Thomas Zimmermann
On Tue, Apr 14, 2026 at 04:40:53PM -0500, Dennis Gilmore wrote:
> The Lontium LT8711UXD is a high performance two lane Type-C/DP1.4
> to HDMI2.0 converter, designed to connect a USB Type-C source or
> a DP1.4 source to an HDMI2.0 sink.
>
> Signed-off-by: Dennis Gilmore <dennis@ausil.us>
> ---
> .../devicetree/bindings/display/bridge/simple-bridge.yaml | 1 +
> 1 file changed, 1 insertion(+)
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v7 3/6] drm/bridge: simple: Add the Lontium LT8711UXD DP-to-HDMI bridge
2026-04-14 21:40 [PATCH v7 0/6] Add support for Orange Pi 5 Pro Dennis Gilmore
2026-04-14 21:40 ` [PATCH v7 1/6] dt-bindings: arm: rockchip: Add " Dennis Gilmore
2026-04-14 21:40 ` [PATCH v7 2/6] dt-bindings: display: bridge: simple: document the Lontium LT8711UXD DP-to-HDMI bridge Dennis Gilmore
@ 2026-04-14 21:40 ` Dennis Gilmore
2026-04-14 21:40 ` [PATCH v7 4/6] arm64: dts: rockchip: rk3588s-orangepi-5: rename PLDO regulator labels to match schematic Dennis Gilmore
` (2 subsequent siblings)
5 siblings, 0 replies; 11+ messages in thread
From: Dennis Gilmore @ 2026-04-14 21:40 UTC (permalink / raw)
Cc: Alexey Charkov, Andrew Lunn, Andrzej Hajda, Chaoyi Chen,
Conor Dooley, David Airlie, Dennis Gilmore, devicetree, dri-devel,
FUKAUMI Naoki, Heiko Stuebner, Hsun Lai, Jernej Skrabec,
Jimmy Hon, John Clark, Jonas Karlman, Krzysztof Kozlowski,
Laurent Pinchart, linux-arm-kernel, linux-kernel, linux-rockchip,
Maarten Lankhorst, Maxime Ripard, Michael Opdenacker,
Michael Riesch, Mykola Kvach, Neil Armstrong, Peter Robinson,
Quentin Schulz, Robert Foss, Rob Herring, Simona Vetter,
Thomas Zimmermann
The Lontium LT8711UXD is a high performance two lane Type-C/DP1.4
to HDMI2.0 converter, designed to connect a USB Type-C source or
a DP1.4 source to an HDMI2.0 sink.
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
---
drivers/gpu/drm/bridge/simple-bridge.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/bridge/simple-bridge.c b/drivers/gpu/drm/bridge/simple-bridge.c
index 8aa31ca3c72d..42c1f3d5ba0c 100644
--- a/drivers/gpu/drm/bridge/simple-bridge.c
+++ b/drivers/gpu/drm/bridge/simple-bridge.c
@@ -270,6 +270,11 @@ static const struct of_device_id simple_bridge_match[] = {
.data = &(const struct simple_bridge_info) {
.connector_type = DRM_MODE_CONNECTOR_HDMIA,
},
+ }, {
+ .compatible = "lontium,lt8711uxd",
+ .data = &(const struct simple_bridge_info) {
+ .connector_type = DRM_MODE_CONNECTOR_HDMIA,
+ },
}, {
.compatible = "parade,ps185hdm",
.data = &(const struct simple_bridge_info) {
--
2.53.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v7 4/6] arm64: dts: rockchip: rk3588s-orangepi-5: rename PLDO regulator labels to match schematic
2026-04-14 21:40 [PATCH v7 0/6] Add support for Orange Pi 5 Pro Dennis Gilmore
` (2 preceding siblings ...)
2026-04-14 21:40 ` [PATCH v7 3/6] drm/bridge: simple: Add " Dennis Gilmore
@ 2026-04-14 21:40 ` Dennis Gilmore
2026-04-14 21:40 ` [PATCH v7 5/6] arm64: dts: rockchip: refactor items from Orange Pi 5/b to prep for Pro Dennis Gilmore
2026-04-14 21:40 ` [PATCH v7 6/6] arm64: dts: rockchip: Add Orange Pi 5 Pro board support Dennis Gilmore
5 siblings, 0 replies; 11+ messages in thread
From: Dennis Gilmore @ 2026-04-14 21:40 UTC (permalink / raw)
Cc: Alexey Charkov, Andrew Lunn, Andrzej Hajda, Chaoyi Chen,
Conor Dooley, David Airlie, Dennis Gilmore, devicetree, dri-devel,
FUKAUMI Naoki, Heiko Stuebner, Hsun Lai, Jernej Skrabec,
Jimmy Hon, John Clark, Jonas Karlman, Krzysztof Kozlowski,
Laurent Pinchart, linux-arm-kernel, linux-kernel, linux-rockchip,
Maarten Lankhorst, Maxime Ripard, Michael Opdenacker,
Michael Riesch, Mykola Kvach, Neil Armstrong, Peter Robinson,
Quentin Schulz, Robert Foss, Rob Herring, Simona Vetter,
Thomas Zimmermann
The Orange Pi 5, 5B and 5 Pro schematics label the RK806 PLDO outputs
using the pattern VCC_*_S0 / VCCA_*_S0 / VDDA_*_S0. Rename the base
dtsi regulator labels (and the es8388 supply references) to match:
pldo-reg1: avcc_1v8_s0 -> vcc_1v8_s0
pldo-reg2: vcc_1v8_s0 -> vcca_1v8_s0
pldo-reg3: avdd_1v2_s0 -> vdda_1v2_s0
pldo-reg4: vcc_3v3_s0 -> vcca_3v3_s0
Also update the saradc vref-supply reference to track the pldo-reg1
rename. No functional change.
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
---
.../boot/dts/rockchip/rk3588s-orangepi-5.dtsi | 26 +++++++++----------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
index dafad29f9854..fd5c6a025cd1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
@@ -274,10 +274,10 @@ es8388: audio-codec@10 {
compatible = "everest,es8388", "everest,es8328";
reg = <0x10>;
clocks = <&cru I2S1_8CH_MCLKOUT>;
- AVDD-supply = <&vcc_3v3_s0>;
- DVDD-supply = <&vcc_1v8_s0>;
- HPVDD-supply = <&vcc_3v3_s0>;
- PVDD-supply = <&vcc_3v3_s0>;
+ AVDD-supply = <&vcca_3v3_s0>;
+ DVDD-supply = <&vcca_1v8_s0>;
+ HPVDD-supply = <&vcca_3v3_s0>;
+ PVDD-supply = <&vcca_3v3_s0>;
assigned-clocks = <&cru I2S1_8CH_MCLKOUT>;
assigned-clock-rates = <12288000>;
#sound-dai-cells = <0>;
@@ -441,7 +441,7 @@ &rknn_mmu_2 {
};
&saradc {
- vref-supply = <&avcc_1v8_s0>;
+ vref-supply = <&vcc_1v8_s0>;
status = "okay";
};
@@ -666,8 +666,8 @@ regulator-state-mem {
};
};
- avcc_1v8_s0: pldo-reg1 {
- regulator-name = "avcc_1v8_s0";
+ vcc_1v8_s0: pldo-reg1 {
+ regulator-name = "vcc_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
@@ -678,8 +678,8 @@ regulator-state-mem {
};
};
- vcc_1v8_s0: pldo-reg2 {
- regulator-name = "vcc_1v8_s0";
+ vcca_1v8_s0: pldo-reg2 {
+ regulator-name = "vcca_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
@@ -691,8 +691,8 @@ regulator-state-mem {
};
};
- avdd_1v2_s0: pldo-reg3 {
- regulator-name = "avdd_1v2_s0";
+ vdda_1v2_s0: pldo-reg3 {
+ regulator-name = "vdda_1v2_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
@@ -703,8 +703,8 @@ regulator-state-mem {
};
};
- vcc_3v3_s0: pldo-reg4 {
- regulator-name = "vcc_3v3_s0";
+ vcca_3v3_s0: pldo-reg4 {
+ regulator-name = "vcca_3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
--
2.53.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH v7 5/6] arm64: dts: rockchip: refactor items from Orange Pi 5/b to prep for Pro
2026-04-14 21:40 [PATCH v7 0/6] Add support for Orange Pi 5 Pro Dennis Gilmore
` (3 preceding siblings ...)
2026-04-14 21:40 ` [PATCH v7 4/6] arm64: dts: rockchip: rk3588s-orangepi-5: rename PLDO regulator labels to match schematic Dennis Gilmore
@ 2026-04-14 21:40 ` Dennis Gilmore
2026-04-15 8:02 ` Alexey Charkov
2026-04-14 21:40 ` [PATCH v7 6/6] arm64: dts: rockchip: Add Orange Pi 5 Pro board support Dennis Gilmore
5 siblings, 1 reply; 11+ messages in thread
From: Dennis Gilmore @ 2026-04-14 21:40 UTC (permalink / raw)
Cc: Alexey Charkov, Andrew Lunn, Andrzej Hajda, Chaoyi Chen,
Conor Dooley, David Airlie, Dennis Gilmore, devicetree, dri-devel,
FUKAUMI Naoki, Heiko Stuebner, Hsun Lai, Jernej Skrabec,
Jimmy Hon, John Clark, Jonas Karlman, Krzysztof Kozlowski,
Laurent Pinchart, linux-arm-kernel, linux-kernel, linux-rockchip,
Maarten Lankhorst, Maxime Ripard, Michael Opdenacker,
Michael Riesch, Mykola Kvach, Neil Armstrong, Peter Robinson,
Quentin Schulz, Robert Foss, Rob Herring, Simona Vetter,
Thomas Zimmermann
The Orange Pi 5 Pro uses the same SoC and base as the Orange Pi 5 and
Orange Pi 5B but has had sound, USB, and leds wired up differently. The
5 and 5B boards use gmac for ethernet where the Pro has a PCIe attached
NIC.
Move the 5/5B-specific bits (analog-sound/es8388, FUSB302 Type-C,
gmac1, pwm-leds, i2s1_8ch routing, USB role-switch plumbing) out of
rk3588s-orangepi-5.dtsi into a new rk3588s-orangepi-5-5b.dtsi that is
included by both 5 and 5B.
The RK806 PLDO1 and PLDO2 outputs are wired differently between the
5/5B and the Pro (PLDO1/PLDO2 are swapped), so label the PMIC node
rk806_single in the base dtsi, drop pldo-reg1/pldo-reg2 from it, and
define them via a &rk806_single regulators augmentation in
rk3588s-orangepi-5-5b.dtsi. The Pro will supply its own mapping.
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
---
.../dts/rockchip/rk3588s-orangepi-5-5b.dtsi | 222 +++++++++++++++++
.../boot/dts/rockchip/rk3588s-orangepi-5.dts | 6 +-
.../boot/dts/rockchip/rk3588s-orangepi-5.dtsi | 225 +-----------------
.../boot/dts/rockchip/rk3588s-orangepi-5b.dts | 2 +-
4 files changed, 240 insertions(+), 215 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi
new file mode 100644
index 000000000000..9e987ffa6241
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device tree definitions shared by the Orange Pi 5 and Orange Pi 5B
+ * but not the Orange Pi 5 Pro.
+ */
+
+#include <dt-bindings/usb/pd.h>
+#include "rk3588s-orangepi-5.dtsi"
+
+/ {
+ aliases {
+ ethernet0 = &gmac1;
+ };
+
+ analog-sound {
+ compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ simple-audio-card,name = "rockchip,es8388";
+ simple-audio-card,bitclock-master = <&masterdai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&masterdai>;
+ simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,routing =
+ "Headphones", "LOUT1",
+ "Headphones", "ROUT1",
+ "LINPUT1", "Microphone Jack",
+ "RINPUT1", "Microphone Jack",
+ "LINPUT2", "Onboard Microphone",
+ "RINPUT2", "Onboard Microphone";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone",
+ "Headphone", "Headphones";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_8ch>;
+ };
+
+ masterdai: simple-audio-card,codec {
+ sound-dai = <&es8388>;
+ system-clock-frequency = <12288000>;
+ };
+ };
+
+ pwm-leds {
+ compatible = "pwm-leds";
+
+ led {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ linux,default-trigger = "heartbeat";
+ max-brightness = <255>;
+ pwms = <&pwm0 0 25000 0>;
+ };
+ };
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy1>;
+ phy-mode = "rgmii-rxid";
+ pinctrl-0 = <&gmac1_miim
+ &gmac1_tx_bus2
+ &gmac1_rx_bus2
+ &gmac1_rgmii_clk
+ &gmac1_rgmii_bus>;
+ pinctrl-names = "default";
+ tx_delay = <0x42>;
+ status = "okay";
+};
+
+&i2c6 {
+ es8388: audio-codec@10 {
+ compatible = "everest,es8388", "everest,es8328";
+ reg = <0x10>;
+ clocks = <&cru I2S1_8CH_MCLKOUT>;
+ AVDD-supply = <&vcca_3v3_s0>;
+ DVDD-supply = <&vcca_1v8_s0>;
+ HPVDD-supply = <&vcca_3v3_s0>;
+ PVDD-supply = <&vcca_3v3_s0>;
+ assigned-clocks = <&cru I2S1_8CH_MCLKOUT>;
+ assigned-clock-rates = <12288000>;
+ #sound-dai-cells = <0>;
+ };
+
+ usbc0: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usbc0_int>;
+ vbus-supply = <&vbus_typec>;
+ status = "okay";
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ op-sink-microwatt = <1000000>;
+ power-role = "dual";
+ sink-pdos =
+ <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+ source-pdos =
+ <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ try-power-role = "source";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_hs: endpoint {
+ remote-endpoint = <&usb_host0_xhci_drd_sw>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ usbc0_ss: endpoint {
+ remote-endpoint = <&usbdp_phy0_typec_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ usbc0_sbu: endpoint {
+ remote-endpoint = <&usbdp_phy0_typec_sbu>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&i2s1_8ch {
+ rockchip,i2s-tx-route = <3 2 1 0>;
+ rockchip,i2s-rx-route = <1 3 2 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1m0_sclk
+ &i2s1m0_mclk
+ &i2s1m0_lrck
+ &i2s1m0_sdi1
+ &i2s1m0_sdo3>;
+ status = "okay";
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0m2_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&rk806_single {
+ regulators {
+ vcc_1v8_s0: pldo-reg1 {
+ regulator-name = "vcc_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcca_1v8_s0: pldo-reg2 {
+ regulator-name = "vcca_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+ };
+};
+
+
+&usb_host0_xhci {
+ dr_mode = "otg";
+ usb-role-switch;
+
+ port {
+ usb_host0_xhci_drd_sw: endpoint {
+ remote-endpoint = <&usbc0_hs>;
+ };
+ };
+};
+
+&usb_host2_xhci {
+ status = "okay";
+};
+
+&usbdp_phy0 {
+ mode-switch;
+ orientation-switch;
+ sbu1-dc-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+ sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usbdp_phy0_typec_ss: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_ss>;
+ };
+
+ usbdp_phy0_typec_sbu: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usbc0_sbu>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
index 83b9b6645a1e..d76bdf1b5e90 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
@@ -2,12 +2,16 @@
/dts-v1/;
-#include "rk3588s-orangepi-5.dtsi"
+#include "rk3588s-orangepi-5-5b.dtsi"
/ {
model = "Xunlong Orange Pi 5";
compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
+ aliases {
+ mmc0 = &sdmmc;
+ };
+
vcc3v3_pcie20: regulator-vcc3v3-pcie20 {
compatible = "regulator-fixed";
enable-active-high;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
index fd5c6a025cd1..2b605e5fc35a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
@@ -3,19 +3,13 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
-#include <dt-bindings/usb/pd.h>
#include "rk3588s.dtsi"
/ {
- aliases {
- ethernet0 = &gmac1;
- mmc0 = &sdmmc;
- };
-
chosen {
stdout-path = "serial2:1500000n8";
};
@@ -34,38 +28,6 @@ button-recovery {
};
};
- analog-sound {
- compatible = "simple-audio-card";
- pinctrl-names = "default";
- pinctrl-0 = <&hp_detect>;
- simple-audio-card,name = "rockchip,es8388";
- simple-audio-card,bitclock-master = <&masterdai>;
- simple-audio-card,format = "i2s";
- simple-audio-card,frame-master = <&masterdai>;
- simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,routing =
- "Headphones", "LOUT1",
- "Headphones", "ROUT1",
- "LINPUT1", "Microphone Jack",
- "RINPUT1", "Microphone Jack",
- "LINPUT2", "Onboard Microphone",
- "RINPUT2", "Onboard Microphone";
- simple-audio-card,widgets =
- "Microphone", "Microphone Jack",
- "Microphone", "Onboard Microphone",
- "Headphone", "Headphones";
-
- simple-audio-card,cpu {
- sound-dai = <&i2s1_8ch>;
- };
-
- masterdai: simple-audio-card,codec {
- sound-dai = <&es8388>;
- system-clock-frequency = <12288000>;
- };
- };
-
hdmi0-con {
compatible = "hdmi-connector";
type = "a";
@@ -77,18 +39,6 @@ hdmi0_con_in: endpoint {
};
};
- pwm-leds {
- compatible = "pwm-leds";
-
- led {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
- linux,default-trigger = "heartbeat";
- max-brightness = <255>;
- pwms = <&pwm0 0 25000 0>;
- };
- };
-
vbus_typec: regulator-vbus-typec {
compatible = "regulator-fixed";
enable-active-high;
@@ -101,15 +51,6 @@ vbus_typec: regulator-vbus-typec {
vin-supply = <&vcc5v0_sys>;
};
- vcc5v0_sys: regulator-vcc5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 {
compatible = "regulator-fixed";
gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
@@ -119,6 +60,15 @@ vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 {
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3_s3>;
};
+
+ vcc5v0_sys: regulator-vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
};
&combphy0_ps {
@@ -161,20 +111,6 @@ &cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
-&gmac1 {
- clock_in_out = "output";
- phy-handle = <&rgmii_phy1>;
- phy-mode = "rgmii-rxid";
- pinctrl-0 = <&gmac1_miim
- &gmac1_tx_bus2
- &gmac1_rx_bus2
- &gmac1_rgmii_clk
- &gmac1_rgmii_bus>;
- pinctrl-names = "default";
- tx_delay = <0x42>;
- status = "okay";
-};
-
&gpu {
mali-supply = <&vdd_gpu_s0>;
status = "okay";
@@ -270,69 +206,6 @@ &i2c6 {
pinctrl-0 = <&i2c6m3_xfer>;
status = "okay";
- es8388: audio-codec@10 {
- compatible = "everest,es8388", "everest,es8328";
- reg = <0x10>;
- clocks = <&cru I2S1_8CH_MCLKOUT>;
- AVDD-supply = <&vcca_3v3_s0>;
- DVDD-supply = <&vcca_1v8_s0>;
- HPVDD-supply = <&vcca_3v3_s0>;
- PVDD-supply = <&vcca_3v3_s0>;
- assigned-clocks = <&cru I2S1_8CH_MCLKOUT>;
- assigned-clock-rates = <12288000>;
- #sound-dai-cells = <0>;
- };
-
- usbc0: usb-typec@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&usbc0_int>;
- vbus-supply = <&vbus_typec>;
- status = "okay";
-
- usb_con: connector {
- compatible = "usb-c-connector";
- label = "USB-C";
- data-role = "dual";
- op-sink-microwatt = <1000000>;
- power-role = "dual";
- sink-pdos =
- <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
- source-pdos =
- <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
- try-power-role = "source";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- usbc0_hs: endpoint {
- remote-endpoint = <&usb_host0_xhci_drd_sw>;
- };
- };
-
- port@1 {
- reg = <1>;
- usbc0_ss: endpoint {
- remote-endpoint = <&usbdp_phy0_typec_ss>;
- };
- };
-
- port@2 {
- reg = <2>;
- usbc0_sbu: endpoint {
- remote-endpoint = <&usbdp_phy0_typec_sbu>;
- };
- };
- };
- };
- };
-
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
@@ -346,18 +219,6 @@ hym8563: rtc@51 {
};
};
-&i2s1_8ch {
- rockchip,i2s-tx-route = <3 2 1 0>;
- rockchip,i2s-rx-route = <1 3 2 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s1m0_sclk
- &i2s1m0_mclk
- &i2s1m0_lrck
- &i2s1m0_sdi1
- &i2s1m0_sdo3>;
- status = "okay";
-};
-
&i2s5_8ch {
status = "okay";
};
@@ -404,12 +265,6 @@ typec5v_pwren: typec5v-pwren {
};
};
-&pwm0 {
- pinctrl-0 = <&pwm0m2_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
&rknn_core_0 {
npu-supply = <&vdd_npu_s0>;
sram-supply = <&vdd_npu_s0>;
@@ -491,7 +346,7 @@ &spi2 {
pinctrl-names = "default";
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
- pmic@0 {
+ rk806_single: pmic@0 {
compatible = "rockchip,rk806";
reg = <0x0>;
interrupt-parent = <&gpio0>;
@@ -666,31 +521,6 @@ regulator-state-mem {
};
};
- vcc_1v8_s0: pldo-reg1 {
- regulator-name = "vcc_1v8_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca_1v8_s0: pldo-reg2 {
- regulator-name = "vcca_1v8_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
vdda_1v2_s0: pldo-reg3 {
regulator-name = "vdda_1v2_s0";
regulator-always-on;
@@ -841,26 +671,7 @@ &uart2 {
};
&usbdp_phy0 {
- mode-switch;
- orientation-switch;
- sbu1-dc-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
- sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
status = "okay";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- usbdp_phy0_typec_ss: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&usbc0_ss>;
- };
-
- usbdp_phy0_typec_sbu: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&usbc0_sbu>;
- };
- };
};
&usb_host0_ehci {
@@ -872,15 +683,7 @@ &usb_host0_ohci {
};
&usb_host0_xhci {
- dr_mode = "otg";
- usb-role-switch;
status = "okay";
-
- port {
- usb_host0_xhci_drd_sw: endpoint {
- remote-endpoint = <&usbc0_hs>;
- };
- };
};
&usb_host1_ehci {
@@ -891,7 +694,7 @@ &usb_host1_ohci {
status = "okay";
};
-&usb_host2_xhci {
+&vop {
status = "okay";
};
@@ -899,10 +702,6 @@ &vop_mmu {
status = "okay";
};
-&vop {
- status = "okay";
-};
-
&vp0 {
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
index d21ec320d295..8af174777809 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
@@ -2,7 +2,7 @@
/dts-v1/;
-#include "rk3588s-orangepi-5.dtsi"
+#include "rk3588s-orangepi-5-5b.dtsi"
/ {
model = "Xunlong Orange Pi 5B";
--
2.53.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v7 5/6] arm64: dts: rockchip: refactor items from Orange Pi 5/b to prep for Pro
2026-04-14 21:40 ` [PATCH v7 5/6] arm64: dts: rockchip: refactor items from Orange Pi 5/b to prep for Pro Dennis Gilmore
@ 2026-04-15 8:02 ` Alexey Charkov
0 siblings, 0 replies; 11+ messages in thread
From: Alexey Charkov @ 2026-04-15 8:02 UTC (permalink / raw)
To: Dennis Gilmore
Cc: Andrew Lunn, Andrzej Hajda, Chaoyi Chen, Conor Dooley,
David Airlie, devicetree, dri-devel, FUKAUMI Naoki,
Heiko Stuebner, Hsun Lai, Jernej Skrabec, Jimmy Hon, John Clark,
Jonas Karlman, Krzysztof Kozlowski, Laurent Pinchart,
linux-arm-kernel, linux-kernel, linux-rockchip, Maarten Lankhorst,
Maxime Ripard, Michael Opdenacker, Michael Riesch, Mykola Kvach,
Neil Armstrong, Peter Robinson, Quentin Schulz, Robert Foss,
Rob Herring, Simona Vetter, Thomas Zimmermann
On Wed, Apr 15, 2026 at 1:41 AM Dennis Gilmore <dennis@ausil.us> wrote:
>
> The Orange Pi 5 Pro uses the same SoC and base as the Orange Pi 5 and
> Orange Pi 5B but has had sound, USB, and leds wired up differently. The
> 5 and 5B boards use gmac for ethernet where the Pro has a PCIe attached
> NIC.
>
> Move the 5/5B-specific bits (analog-sound/es8388, FUSB302 Type-C,
> gmac1, pwm-leds, i2s1_8ch routing, USB role-switch plumbing) out of
> rk3588s-orangepi-5.dtsi into a new rk3588s-orangepi-5-5b.dtsi that is
> included by both 5 and 5B.
>
> The RK806 PLDO1 and PLDO2 outputs are wired differently between the
> 5/5B and the Pro (PLDO1/PLDO2 are swapped), so label the PMIC node
> rk806_single in the base dtsi, drop pldo-reg1/pldo-reg2 from it, and
> define them via a &rk806_single regulators augmentation in
> rk3588s-orangepi-5-5b.dtsi. The Pro will supply its own mapping.
>
> Signed-off-by: Dennis Gilmore <dennis@ausil.us>
> ---
> .../dts/rockchip/rk3588s-orangepi-5-5b.dtsi | 222 +++++++++++++++++
> .../boot/dts/rockchip/rk3588s-orangepi-5.dts | 6 +-
> .../boot/dts/rockchip/rk3588s-orangepi-5.dtsi | 225 +-----------------
> .../boot/dts/rockchip/rk3588s-orangepi-5b.dts | 2 +-
> 4 files changed, 240 insertions(+), 215 deletions(-)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi
Hi Dennis,
Sashiko makes a good point [1] about also moving the vbus_typec to the
*-5-5b.dtsi, given that it's not used on the Pro. Same with mdio1
which only makes sense together with its respective GMAC. Other than
that, this looks good to me - feel free to include:
Reviewed-by: Alexey Charkov <alchark@gmail.com
Best regards,
Alexey
[1] https://sashiko.dev/#/patchset/20260414214104.1363987-1-dennis%40ausil.us
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi
> new file mode 100644
> index 000000000000..9e987ffa6241
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi
> @@ -0,0 +1,222 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device tree definitions shared by the Orange Pi 5 and Orange Pi 5B
> + * but not the Orange Pi 5 Pro.
> + */
> +
> +#include <dt-bindings/usb/pd.h>
> +#include "rk3588s-orangepi-5.dtsi"
> +
> +/ {
> + aliases {
> + ethernet0 = &gmac1;
> + };
> +
> + analog-sound {
> + compatible = "simple-audio-card";
> + pinctrl-names = "default";
> + pinctrl-0 = <&hp_detect>;
> + simple-audio-card,name = "rockchip,es8388";
> + simple-audio-card,bitclock-master = <&masterdai>;
> + simple-audio-card,format = "i2s";
> + simple-audio-card,frame-master = <&masterdai>;
> + simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
> + simple-audio-card,mclk-fs = <256>;
> + simple-audio-card,routing =
> + "Headphones", "LOUT1",
> + "Headphones", "ROUT1",
> + "LINPUT1", "Microphone Jack",
> + "RINPUT1", "Microphone Jack",
> + "LINPUT2", "Onboard Microphone",
> + "RINPUT2", "Onboard Microphone";
> + simple-audio-card,widgets =
> + "Microphone", "Microphone Jack",
> + "Microphone", "Onboard Microphone",
> + "Headphone", "Headphones";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&i2s1_8ch>;
> + };
> +
> + masterdai: simple-audio-card,codec {
> + sound-dai = <&es8388>;
> + system-clock-frequency = <12288000>;
> + };
> + };
> +
> + pwm-leds {
> + compatible = "pwm-leds";
> +
> + led {
> + color = <LED_COLOR_ID_GREEN>;
> + function = LED_FUNCTION_STATUS;
> + linux,default-trigger = "heartbeat";
> + max-brightness = <255>;
> + pwms = <&pwm0 0 25000 0>;
> + };
> + };
> +};
> +
> +&gmac1 {
> + clock_in_out = "output";
> + phy-handle = <&rgmii_phy1>;
> + phy-mode = "rgmii-rxid";
> + pinctrl-0 = <&gmac1_miim
> + &gmac1_tx_bus2
> + &gmac1_rx_bus2
> + &gmac1_rgmii_clk
> + &gmac1_rgmii_bus>;
> + pinctrl-names = "default";
> + tx_delay = <0x42>;
> + status = "okay";
> +};
> +
> +&i2c6 {
> + es8388: audio-codec@10 {
> + compatible = "everest,es8388", "everest,es8328";
> + reg = <0x10>;
> + clocks = <&cru I2S1_8CH_MCLKOUT>;
> + AVDD-supply = <&vcca_3v3_s0>;
> + DVDD-supply = <&vcca_1v8_s0>;
> + HPVDD-supply = <&vcca_3v3_s0>;
> + PVDD-supply = <&vcca_3v3_s0>;
> + assigned-clocks = <&cru I2S1_8CH_MCLKOUT>;
> + assigned-clock-rates = <12288000>;
> + #sound-dai-cells = <0>;
> + };
> +
> + usbc0: usb-typec@22 {
> + compatible = "fcs,fusb302";
> + reg = <0x22>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&usbc0_int>;
> + vbus-supply = <&vbus_typec>;
> + status = "okay";
> +
> + usb_con: connector {
> + compatible = "usb-c-connector";
> + label = "USB-C";
> + data-role = "dual";
> + op-sink-microwatt = <1000000>;
> + power-role = "dual";
> + sink-pdos =
> + <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
> + source-pdos =
> + <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
> + try-power-role = "source";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + usbc0_hs: endpoint {
> + remote-endpoint = <&usb_host0_xhci_drd_sw>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + usbc0_ss: endpoint {
> + remote-endpoint = <&usbdp_phy0_typec_ss>;
> + };
> + };
> +
> + port@2 {
> + reg = <2>;
> + usbc0_sbu: endpoint {
> + remote-endpoint = <&usbdp_phy0_typec_sbu>;
> + };
> + };
> + };
> + };
> + };
> +};
> +
> +&i2s1_8ch {
> + rockchip,i2s-tx-route = <3 2 1 0>;
> + rockchip,i2s-rx-route = <1 3 2 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2s1m0_sclk
> + &i2s1m0_mclk
> + &i2s1m0_lrck
> + &i2s1m0_sdi1
> + &i2s1m0_sdo3>;
> + status = "okay";
> +};
> +
> +&pwm0 {
> + pinctrl-0 = <&pwm0m2_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&rk806_single {
> + regulators {
> + vcc_1v8_s0: pldo-reg1 {
> + regulator-name = "vcc_1v8_s0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcca_1v8_s0: pldo-reg2 {
> + regulator-name = "vcca_1v8_s0";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> + };
> +};
> +
> +
> +&usb_host0_xhci {
> + dr_mode = "otg";
> + usb-role-switch;
> +
> + port {
> + usb_host0_xhci_drd_sw: endpoint {
> + remote-endpoint = <&usbc0_hs>;
> + };
> + };
> +};
> +
> +&usb_host2_xhci {
> + status = "okay";
> +};
> +
> +&usbdp_phy0 {
> + mode-switch;
> + orientation-switch;
> + sbu1-dc-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
> + sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
> +
> + port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + usbdp_phy0_typec_ss: endpoint@0 {
> + reg = <0>;
> + remote-endpoint = <&usbc0_ss>;
> + };
> +
> + usbdp_phy0_typec_sbu: endpoint@1 {
> + reg = <1>;
> + remote-endpoint = <&usbc0_sbu>;
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
> index 83b9b6645a1e..d76bdf1b5e90 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
> @@ -2,12 +2,16 @@
>
> /dts-v1/;
>
> -#include "rk3588s-orangepi-5.dtsi"
> +#include "rk3588s-orangepi-5-5b.dtsi"
>
> / {
> model = "Xunlong Orange Pi 5";
> compatible = "xunlong,orangepi-5", "rockchip,rk3588s";
>
> + aliases {
> + mmc0 = &sdmmc;
> + };
> +
> vcc3v3_pcie20: regulator-vcc3v3-pcie20 {
> compatible = "regulator-fixed";
> enable-active-high;
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
> index fd5c6a025cd1..2b605e5fc35a 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
> @@ -3,19 +3,13 @@
> /dts-v1/;
>
> #include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/leds/common.h>
> #include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> #include <dt-bindings/pinctrl/rockchip.h>
> #include <dt-bindings/soc/rockchip,vop2.h>
> -#include <dt-bindings/usb/pd.h>
> #include "rk3588s.dtsi"
>
> / {
> - aliases {
> - ethernet0 = &gmac1;
> - mmc0 = &sdmmc;
> - };
> -
> chosen {
> stdout-path = "serial2:1500000n8";
> };
> @@ -34,38 +28,6 @@ button-recovery {
> };
> };
>
> - analog-sound {
> - compatible = "simple-audio-card";
> - pinctrl-names = "default";
> - pinctrl-0 = <&hp_detect>;
> - simple-audio-card,name = "rockchip,es8388";
> - simple-audio-card,bitclock-master = <&masterdai>;
> - simple-audio-card,format = "i2s";
> - simple-audio-card,frame-master = <&masterdai>;
> - simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
> - simple-audio-card,mclk-fs = <256>;
> - simple-audio-card,routing =
> - "Headphones", "LOUT1",
> - "Headphones", "ROUT1",
> - "LINPUT1", "Microphone Jack",
> - "RINPUT1", "Microphone Jack",
> - "LINPUT2", "Onboard Microphone",
> - "RINPUT2", "Onboard Microphone";
> - simple-audio-card,widgets =
> - "Microphone", "Microphone Jack",
> - "Microphone", "Onboard Microphone",
> - "Headphone", "Headphones";
> -
> - simple-audio-card,cpu {
> - sound-dai = <&i2s1_8ch>;
> - };
> -
> - masterdai: simple-audio-card,codec {
> - sound-dai = <&es8388>;
> - system-clock-frequency = <12288000>;
> - };
> - };
> -
> hdmi0-con {
> compatible = "hdmi-connector";
> type = "a";
> @@ -77,18 +39,6 @@ hdmi0_con_in: endpoint {
> };
> };
>
> - pwm-leds {
> - compatible = "pwm-leds";
> -
> - led {
> - color = <LED_COLOR_ID_GREEN>;
> - function = LED_FUNCTION_STATUS;
> - linux,default-trigger = "heartbeat";
> - max-brightness = <255>;
> - pwms = <&pwm0 0 25000 0>;
> - };
> - };
> -
> vbus_typec: regulator-vbus-typec {
> compatible = "regulator-fixed";
> enable-active-high;
> @@ -101,15 +51,6 @@ vbus_typec: regulator-vbus-typec {
> vin-supply = <&vcc5v0_sys>;
> };
>
> - vcc5v0_sys: regulator-vcc5v0-sys {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - };
> -
> vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 {
> compatible = "regulator-fixed";
> gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
> @@ -119,6 +60,15 @@ vcc_3v3_sd_s0: regulator-vcc-3v3-sd-s0 {
> regulator-max-microvolt = <3300000>;
> vin-supply = <&vcc_3v3_s3>;
> };
> +
> + vcc5v0_sys: regulator-vcc5v0-sys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> };
>
> &combphy0_ps {
> @@ -161,20 +111,6 @@ &cpu_l3 {
> cpu-supply = <&vdd_cpu_lit_s0>;
> };
>
> -&gmac1 {
> - clock_in_out = "output";
> - phy-handle = <&rgmii_phy1>;
> - phy-mode = "rgmii-rxid";
> - pinctrl-0 = <&gmac1_miim
> - &gmac1_tx_bus2
> - &gmac1_rx_bus2
> - &gmac1_rgmii_clk
> - &gmac1_rgmii_bus>;
> - pinctrl-names = "default";
> - tx_delay = <0x42>;
> - status = "okay";
> -};
> -
> &gpu {
> mali-supply = <&vdd_gpu_s0>;
> status = "okay";
> @@ -270,69 +206,6 @@ &i2c6 {
> pinctrl-0 = <&i2c6m3_xfer>;
> status = "okay";
>
> - es8388: audio-codec@10 {
> - compatible = "everest,es8388", "everest,es8328";
> - reg = <0x10>;
> - clocks = <&cru I2S1_8CH_MCLKOUT>;
> - AVDD-supply = <&vcca_3v3_s0>;
> - DVDD-supply = <&vcca_1v8_s0>;
> - HPVDD-supply = <&vcca_3v3_s0>;
> - PVDD-supply = <&vcca_3v3_s0>;
> - assigned-clocks = <&cru I2S1_8CH_MCLKOUT>;
> - assigned-clock-rates = <12288000>;
> - #sound-dai-cells = <0>;
> - };
> -
> - usbc0: usb-typec@22 {
> - compatible = "fcs,fusb302";
> - reg = <0x22>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&usbc0_int>;
> - vbus-supply = <&vbus_typec>;
> - status = "okay";
> -
> - usb_con: connector {
> - compatible = "usb-c-connector";
> - label = "USB-C";
> - data-role = "dual";
> - op-sink-microwatt = <1000000>;
> - power-role = "dual";
> - sink-pdos =
> - <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
> - source-pdos =
> - <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
> - try-power-role = "source";
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> - usbc0_hs: endpoint {
> - remote-endpoint = <&usb_host0_xhci_drd_sw>;
> - };
> - };
> -
> - port@1 {
> - reg = <1>;
> - usbc0_ss: endpoint {
> - remote-endpoint = <&usbdp_phy0_typec_ss>;
> - };
> - };
> -
> - port@2 {
> - reg = <2>;
> - usbc0_sbu: endpoint {
> - remote-endpoint = <&usbdp_phy0_typec_sbu>;
> - };
> - };
> - };
> - };
> - };
> -
> hym8563: rtc@51 {
> compatible = "haoyu,hym8563";
> reg = <0x51>;
> @@ -346,18 +219,6 @@ hym8563: rtc@51 {
> };
> };
>
> -&i2s1_8ch {
> - rockchip,i2s-tx-route = <3 2 1 0>;
> - rockchip,i2s-rx-route = <1 3 2 0>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&i2s1m0_sclk
> - &i2s1m0_mclk
> - &i2s1m0_lrck
> - &i2s1m0_sdi1
> - &i2s1m0_sdo3>;
> - status = "okay";
> -};
> -
> &i2s5_8ch {
> status = "okay";
> };
> @@ -404,12 +265,6 @@ typec5v_pwren: typec5v-pwren {
> };
> };
>
> -&pwm0 {
> - pinctrl-0 = <&pwm0m2_pins>;
> - pinctrl-names = "default";
> - status = "okay";
> -};
> -
> &rknn_core_0 {
> npu-supply = <&vdd_npu_s0>;
> sram-supply = <&vdd_npu_s0>;
> @@ -491,7 +346,7 @@ &spi2 {
> pinctrl-names = "default";
> pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
>
> - pmic@0 {
> + rk806_single: pmic@0 {
> compatible = "rockchip,rk806";
> reg = <0x0>;
> interrupt-parent = <&gpio0>;
> @@ -666,31 +521,6 @@ regulator-state-mem {
> };
> };
>
> - vcc_1v8_s0: pldo-reg1 {
> - regulator-name = "vcc_1v8_s0";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - };
> - };
> -
> - vcca_1v8_s0: pldo-reg2 {
> - regulator-name = "vcca_1v8_s0";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> -
> - regulator-state-mem {
> - regulator-off-in-suspend;
> - regulator-suspend-microvolt = <1800000>;
> - };
> - };
> -
> vdda_1v2_s0: pldo-reg3 {
> regulator-name = "vdda_1v2_s0";
> regulator-always-on;
> @@ -841,26 +671,7 @@ &uart2 {
> };
>
> &usbdp_phy0 {
> - mode-switch;
> - orientation-switch;
> - sbu1-dc-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
> - sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
> status = "okay";
> -
> - port {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - usbdp_phy0_typec_ss: endpoint@0 {
> - reg = <0>;
> - remote-endpoint = <&usbc0_ss>;
> - };
> -
> - usbdp_phy0_typec_sbu: endpoint@1 {
> - reg = <1>;
> - remote-endpoint = <&usbc0_sbu>;
> - };
> - };
> };
>
> &usb_host0_ehci {
> @@ -872,15 +683,7 @@ &usb_host0_ohci {
> };
>
> &usb_host0_xhci {
> - dr_mode = "otg";
> - usb-role-switch;
> status = "okay";
> -
> - port {
> - usb_host0_xhci_drd_sw: endpoint {
> - remote-endpoint = <&usbc0_hs>;
> - };
> - };
> };
>
> &usb_host1_ehci {
> @@ -891,7 +694,7 @@ &usb_host1_ohci {
> status = "okay";
> };
>
> -&usb_host2_xhci {
> +&vop {
> status = "okay";
> };
>
> @@ -899,10 +702,6 @@ &vop_mmu {
> status = "okay";
> };
>
> -&vop {
> - status = "okay";
> -};
> -
> &vp0 {
> vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
> reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
> index d21ec320d295..8af174777809 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5b.dts
> @@ -2,7 +2,7 @@
>
> /dts-v1/;
>
> -#include "rk3588s-orangepi-5.dtsi"
> +#include "rk3588s-orangepi-5-5b.dtsi"
>
> / {
> model = "Xunlong Orange Pi 5B";
> --
> 2.53.0
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v7 6/6] arm64: dts: rockchip: Add Orange Pi 5 Pro board support
2026-04-14 21:40 [PATCH v7 0/6] Add support for Orange Pi 5 Pro Dennis Gilmore
` (4 preceding siblings ...)
2026-04-14 21:40 ` [PATCH v7 5/6] arm64: dts: rockchip: refactor items from Orange Pi 5/b to prep for Pro Dennis Gilmore
@ 2026-04-14 21:40 ` Dennis Gilmore
2026-04-15 8:57 ` Alexey Charkov
5 siblings, 1 reply; 11+ messages in thread
From: Dennis Gilmore @ 2026-04-14 21:40 UTC (permalink / raw)
Cc: Alexey Charkov, Andrew Lunn, Andrzej Hajda, Chaoyi Chen,
Conor Dooley, David Airlie, Dennis Gilmore, devicetree, dri-devel,
FUKAUMI Naoki, Heiko Stuebner, Hsun Lai, Jernej Skrabec,
Jimmy Hon, John Clark, Jonas Karlman, Krzysztof Kozlowski,
Laurent Pinchart, linux-arm-kernel, linux-kernel, linux-rockchip,
Maarten Lankhorst, Maxime Ripard, Michael Opdenacker,
Michael Riesch, Mykola Kvach, Neil Armstrong, Peter Robinson,
Quentin Schulz, Robert Foss, Rob Herring, Simona Vetter,
Thomas Zimmermann
Add device tree for the Xunlong Orange Pi 5 Pro (RK3588S).
- eMMC module, you can optionally solder a SPI NOR in place and turn
off the eMMC
- PCIe-attached NIC (pcie2x1l1)
- PCIe NVMe slot (pcie2x1l2)
- AP6256 WiFi (BCM43456) via SDIO with mmc-pwrseq
- BCM4345C5 Bluetooth
- es8388 audio
- USB 2.0 and USB 3.0
- Two HDMI ports, the second is connected to the SoC's DP controller
driven through a Lontium LT8711UXD bridge.
Vendors schematics are available at:
https://drive.google.com/file/d/1qs1DratHuh7C6J6MEtQIwUsiSrg8qgTi/view
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../dts/rockchip/rk3588s-orangepi-5-pro.dts | 442 ++++++++++++++++++
2 files changed, 443 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 4d384f153c13..c99dca2ae9e7 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -214,6 +214,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5-pro.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-cm5-base.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-radxa-cm5-io.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
new file mode 100644
index 000000000000..61462c66753d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
@@ -0,0 +1,442 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3588s-orangepi-5.dtsi"
+
+/ {
+ model = "Xunlong Orange Pi 5 Pro";
+ compatible = "xunlong,orangepi-5-pro", "rockchip,rk3588s";
+
+ aliases {
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio;
+ };
+
+ hdmi1-con {
+ compatible = "hdmi-connector";
+ label = "HDMI1 OUT";
+ type = "a";
+
+ port {
+ hdmi1_con_in: endpoint {
+ remote-endpoint = <<8711uxd_out>;
+ };
+ };
+ };
+
+ lt8711uxd {
+ compatible = "lontium,lt8711uxd";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lt8711uxd_in: endpoint {
+ remote-endpoint = <&dp0_out_con>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lt8711uxd_out: endpoint {
+ remote-endpoint = <&hdmi1_con_in>;
+ };
+ };
+ };
+ };
+
+ analog-sound {
+ compatible = "simple-audio-card";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_detect>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "rockchip,es8388";
+ simple-audio-card,routing =
+ "Headphones", "LOUT1",
+ "Headphones", "ROUT1",
+ "LINPUT1", "Microphone Jack",
+ "RINPUT1", "Microphone Jack",
+ "LINPUT2", "Onboard Microphone",
+ "RINPUT2", "Onboard Microphone";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Microphone", "Onboard Microphone",
+ "Headphone", "Headphones";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s2_2ch>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&es8388>;
+ system-clock-frequency = <12288000>;
+ };
+ };
+
+ pwm-leds {
+ compatible = "pwm-leds";
+
+ led-0 {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ linux,default-trigger = "heartbeat";
+ max-brightness = <255>;
+ pwms = <&pwm15 0 1000000 0>;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_ACTIVITY;
+ linux,default-trigger = "heartbeat";
+ max-brightness = <255>;
+ pwms = <&pwm3 0 1000000 0>;
+ };
+ };
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ cooling-levels = <0 50 100 150 200 255>;
+ fan-supply = <&vcc5v0_sys>;
+ pwms = <&pwm2 0 20000000 0>;
+ };
+
+ vcc3v3_dp: regulator-vcc3v3-dp {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_bridge_en>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc3v3_dp";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc3v3_phy1: regulator-vcc3v3-phy1 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc3v3_phy1_en>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "vcc3v3_phy1";
+ startup-delay-us = <50000>;
+ vin-supply = <&vcc_3v3_s3>;
+ };
+
+ vcc5v0_otg: regulator-vcc5v0-otg {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_otg_en>;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ regulator-name = "vcc5v0_otg";
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&hym8563>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ post-power-on-delay-ms = <200>;
+ reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_LOW>;
+ };
+
+ typea_con: usb-a-connector {
+ compatible = "usb-a-connector";
+ data-role = "host";
+ label = "USB3 Type-A";
+ power-role = "source";
+ vbus-supply = <&vcc5v0_otg>;
+ };
+};
+
+&dp0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp0m0_pins>;
+ status = "okay";
+};
+
+&dp0_in {
+ dp0_in_vp1: endpoint {
+ remote-endpoint = <&vp1_out_dp0>;
+ };
+};
+
+&dp0_out {
+ dp0_out_con: endpoint {
+ remote-endpoint = <<8711uxd_in>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1m4_xfer>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3m0_xfer>;
+ status = "okay";
+
+ es8388: audio-codec@11 {
+ compatible = "everest,es8388", "everest,es8328";
+ reg = <0x11>;
+ #sound-dai-cells = <0>;
+ AVDD-supply = <&vcca_3v3_s0>;
+ DVDD-supply = <&vcca_1v8_s0>;
+ HPVDD-supply = <&vcca_3v3_s0>;
+ PVDD-supply = <&vcca_1v8_s0>;
+ assigned-clock-rates = <12288000>;
+ assigned-clocks = <&cru I2S2_2CH_MCLKOUT>;
+ clocks = <&cru I2S2_2CH_MCLKOUT>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s2m1_mclk>;
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4m3_xfer>;
+ status = "okay";
+};
+
+&i2s2_2ch {
+ pinctrl-0 = <&i2s2m1_lrck &i2s2m1_sclk
+ &i2s2m1_sdi &i2s2m1_sdo>;
+ status = "okay";
+};
+
+&package_thermal {
+ polling-delay = <1000>;
+
+ cooling-maps {
+ map0 {
+ trip = <&package_fan0>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map1 {
+ trip = <&package_fan1>;
+ cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ package_fan0: package-fan0 {
+ hysteresis = <2000>;
+ temperature = <55000>;
+ type = "active";
+ };
+
+ package_fan1: package-fan1 {
+ hysteresis = <2000>;
+ temperature = <65000>;
+ type = "active";
+ };
+ };
+};
+
+/* NVMe */
+&pcie2x1l1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2x1l1_rst &pcie30x1m1_1_clkreqn &pcie30x1m1_1_waken>;
+ reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
+ supports-clkreq;
+ vpcie3v3-supply = <&vcc_3v3_s3>;
+ status = "okay";
+};
+
+/* NIC */
+&pcie2x1l2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie2x1l2_rst>;
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc3v3_phy1>;
+ status = "okay";
+};
+
+&pinctrl {
+ bluetooth {
+ bt_wake_gpio: bt-wake-pin {
+ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host_irq: bt-wake-host-irq {
+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ dp {
+ dp_bridge_en: dp-bridge-en {
+ rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie2x1l1_rst: pcie2x1l1-rst {
+ rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie2x1l2_rst: pcie2x1l2-rst {
+ rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc3v3_phy1_en: vcc3v3-phy1-en {
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ vcc5v0_otg_en: vcc5v0-otg-en {
+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wlan {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_host_wake_irq: wifi-host-wake-irq {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pwm15 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm15m2_pins>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2m1_pins>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3m2_pins>;
+ status = "okay";
+};
+
+&rk806_single {
+ regulators {
+ vcca_1v8_s0: pldo-reg1 {
+ regulator-name = "vcca_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_1v8_s0: pldo-reg2 {
+ regulator-name = "vcc_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&sdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ max-frequency = <150000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-mmc;
+ no-sd;
+ non-removable;
+ sd-uhs-sdr104;
+ status = "okay";
+
+ ap6256: wifi@1 {
+ compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-names = "host-wake";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_irq>;
+ };
+};
+
+&uart9 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn &uart9m2_rtsn>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&hym8563>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wakeup";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PC5 IRQ_TYPE_LEVEL_HIGH>;
+ max-speed = <1500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_wake_host_irq &bt_wake_gpio>;
+ shutdown-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+ vbat-supply = <&vcc_3v3_s3>;
+ vddio-supply = <&vcc_1v8_s3>;
+ };
+};
+
+&usb_host0_xhci {
+ dr_mode = "host";
+};
+
+&usbdp_phy0 {
+ /*
+ * USBDP PHY0 is wired to a USB3 Type-A host connector via lanes 2/3.
+ * Additionally lanes 0/1 and the aux channel are wired to the
+ * Lontium LT8711UXD DP-to-HDMI bridge feeding the HDMI1 connector.
+ */
+ rockchip,dp-lane-mux = <0 1>;
+};
+
+&vp1 {
+ vp1_out_dp0: endpoint@a {
+ reg = <ROCKCHIP_VOP2_EP_DP0>;
+ remote-endpoint = <&dp0_in_vp1>;
+ };
+};
--
2.53.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH v7 6/6] arm64: dts: rockchip: Add Orange Pi 5 Pro board support
2026-04-14 21:40 ` [PATCH v7 6/6] arm64: dts: rockchip: Add Orange Pi 5 Pro board support Dennis Gilmore
@ 2026-04-15 8:57 ` Alexey Charkov
2026-04-15 23:34 ` Dennis Gilmore
0 siblings, 1 reply; 11+ messages in thread
From: Alexey Charkov @ 2026-04-15 8:57 UTC (permalink / raw)
To: Dennis Gilmore
Cc: Andrew Lunn, Andrzej Hajda, Chaoyi Chen, Conor Dooley,
David Airlie, devicetree, dri-devel, FUKAUMI Naoki,
Heiko Stuebner, Hsun Lai, Jernej Skrabec, Jimmy Hon, John Clark,
Jonas Karlman, Krzysztof Kozlowski, Laurent Pinchart,
linux-arm-kernel, linux-kernel, linux-rockchip, Maarten Lankhorst,
Maxime Ripard, Michael Opdenacker, Michael Riesch, Mykola Kvach,
Neil Armstrong, Peter Robinson, Quentin Schulz, Robert Foss,
Rob Herring, Simona Vetter, Thomas Zimmermann
On Wed, Apr 15, 2026 at 1:41 AM Dennis Gilmore <dennis@ausil.us> wrote:
>
> Add device tree for the Xunlong Orange Pi 5 Pro (RK3588S).
>
> - eMMC module, you can optionally solder a SPI NOR in place and turn
> off the eMMC
> - PCIe-attached NIC (pcie2x1l1)
> - PCIe NVMe slot (pcie2x1l2)
Hi Dennis,
Sashiko noticed [1] that the controller names here do not match the
nodes/comments you have in the patch body - which ones are correct?
[1] https://sashiko.dev/#/patchset/20260414214104.1363987-1-dennis%40ausil.us
> - AP6256 WiFi (BCM43456) via SDIO with mmc-pwrseq
> - BCM4345C5 Bluetooth
> - es8388 audio
> - USB 2.0 and USB 3.0
> - Two HDMI ports, the second is connected to the SoC's DP controller
> driven through a Lontium LT8711UXD bridge.
>
> Vendors schematics are available at:
> https://drive.google.com/file/d/1qs1DratHuh7C6J6MEtQIwUsiSrg8qgTi/view
>
> Signed-off-by: Dennis Gilmore <dennis@ausil.us>
> ---
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../dts/rockchip/rk3588s-orangepi-5-pro.dts | 442 ++++++++++++++++++
> 2 files changed, 443 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 4d384f153c13..c99dca2ae9e7 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -214,6 +214,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5-pro.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-cm5-base.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-radxa-cm5-io.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> new file mode 100644
> index 000000000000..61462c66753d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> @@ -0,0 +1,442 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include "rk3588s-orangepi-5.dtsi"
> +
> +/ {
> + model = "Xunlong Orange Pi 5 Pro";
> + compatible = "xunlong,orangepi-5-pro", "rockchip,rk3588s";
> +
> + aliases {
> + mmc0 = &sdhci;
> + mmc1 = &sdmmc;
> + mmc2 = &sdio;
> + };
> +
> + hdmi1-con {
> + compatible = "hdmi-connector";
> + label = "HDMI1 OUT";
> + type = "a";
> +
> + port {
> + hdmi1_con_in: endpoint {
> + remote-endpoint = <<8711uxd_out>;
> + };
> + };
> + };
> +
> + lt8711uxd {
Please use a generic node name per DT convention. "hdmi-bridge" perhaps?
> + compatible = "lontium,lt8711uxd";
Don't you want to add "vdd-supply = <&vcc3v3_dp>;" here? It costs you
nothing, as it's already in the binding and in the driver, and having
this dependency listed explicitly will let the kernel order the driver
probes correctly, and also likely let you drop the boot-on/always-on
annotation from the regulator node.
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + lt8711uxd_in: endpoint {
> + remote-endpoint = <&dp0_out_con>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + lt8711uxd_out: endpoint {
> + remote-endpoint = <&hdmi1_con_in>;
> + };
> + };
> + };
> + };
> +
> + analog-sound {
> + compatible = "simple-audio-card";
> + pinctrl-names = "default";
> + pinctrl-0 = <&hp_detect>;
> + simple-audio-card,format = "i2s";
> + simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
> + simple-audio-card,mclk-fs = <256>;
> + simple-audio-card,name = "rockchip,es8388";
> + simple-audio-card,routing =
> + "Headphones", "LOUT1",
> + "Headphones", "ROUT1",
> + "LINPUT1", "Microphone Jack",
> + "RINPUT1", "Microphone Jack",
> + "LINPUT2", "Onboard Microphone",
> + "RINPUT2", "Onboard Microphone";
> + simple-audio-card,widgets =
> + "Microphone", "Microphone Jack",
> + "Microphone", "Onboard Microphone",
> + "Headphone", "Headphones";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&i2s2_2ch>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&es8388>;
> + system-clock-frequency = <12288000>;
> + };
> + };
> +
> + pwm-leds {
> + compatible = "pwm-leds";
> +
> + led-0 {
> + color = <LED_COLOR_ID_BLUE>;
> + function = LED_FUNCTION_STATUS;
> + linux,default-trigger = "heartbeat";
> + max-brightness = <255>;
> + pwms = <&pwm15 0 1000000 0>;
> + };
> +
> + led-1 {
> + color = <LED_COLOR_ID_GREEN>;
> + function = LED_FUNCTION_ACTIVITY;
> + linux,default-trigger = "heartbeat";
> + max-brightness = <255>;
> + pwms = <&pwm3 0 1000000 0>;
> + };
> + };
> +
> + fan: pwm-fan {
> + compatible = "pwm-fan";
> + #cooling-cells = <2>;
> + cooling-levels = <0 50 100 150 200 255>;
> + fan-supply = <&vcc5v0_sys>;
> + pwms = <&pwm2 0 20000000 0>;
> + };
> +
> + vcc3v3_dp: regulator-vcc3v3-dp {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&dp_bridge_en>;
> + regulator-max-microvolt = <3300000>;
> + regulator-min-microvolt = <3300000>;
> + regulator-name = "vcc3v3_dp";
> + regulator-always-on;
> + regulator-boot-on;
Please see if you can drop these always-on/boot-on when vdd-supply is
explicitly listed in the bridge node
> + vin-supply = <&vcc_3v3_s3>;
> + };
> +
> + vcc3v3_phy1: regulator-vcc3v3-phy1 {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc3v3_phy1_en>;
The board schematics call the pin "Ethernet_EN"
> + regulator-max-microvolt = <3300000>;
> + regulator-min-microvolt = <3300000>;
> + regulator-name = "vcc3v3_phy1";
> + startup-delay-us = <50000>;
> + vin-supply = <&vcc_3v3_s3>;
> + };
> +
> + vcc5v0_otg: regulator-vcc5v0-otg {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&vcc5v0_otg_en>;
> + regulator-max-microvolt = <5000000>;
> + regulator-min-microvolt = <5000000>;
> + regulator-name = "vcc5v0_otg";
> + vin-supply = <&vcc5v0_sys>;
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&hym8563>;
> + clock-names = "ext_clock";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wifi_enable_h>;
> + post-power-on-delay-ms = <200>;
> + reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_LOW>;
> + };
> +
> + typea_con: usb-a-connector {
> + compatible = "usb-a-connector";
> + data-role = "host";
> + label = "USB3 Type-A";
> + power-role = "source";
> + vbus-supply = <&vcc5v0_otg>;
> + };
> +};
> +
> +&dp0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&dp0m0_pins>;
> + status = "okay";
> +};
> +
> +&dp0_in {
> + dp0_in_vp1: endpoint {
> + remote-endpoint = <&vp1_out_dp0>;
> + };
> +};
> +
> +&dp0_out {
> + dp0_out_con: endpoint {
> + remote-endpoint = <<8711uxd_in>;
> + };
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1m4_xfer>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c3m0_xfer>;
> + status = "okay";
> +
> + es8388: audio-codec@11 {
> + compatible = "everest,es8388", "everest,es8328";
> + reg = <0x11>;
> + #sound-dai-cells = <0>;
> + AVDD-supply = <&vcca_3v3_s0>;
> + DVDD-supply = <&vcca_1v8_s0>;
> + HPVDD-supply = <&vcca_3v3_s0>;
> + PVDD-supply = <&vcca_1v8_s0>;
> + assigned-clock-rates = <12288000>;
> + assigned-clocks = <&cru I2S2_2CH_MCLKOUT>;
> + clocks = <&cru I2S2_2CH_MCLKOUT>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2s2m1_mclk>;
> + };
> +};
> +
> +&i2c4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c4m3_xfer>;
> + status = "okay";
> +};
> +
> +&i2s2_2ch {
> + pinctrl-0 = <&i2s2m1_lrck &i2s2m1_sclk
> + &i2s2m1_sdi &i2s2m1_sdo>;
> + status = "okay";
> +};
> +
> +&package_thermal {
> + polling-delay = <1000>;
> +
> + cooling-maps {
> + map0 {
> + trip = <&package_fan0>;
> + cooling-device = <&fan THERMAL_NO_LIMIT 1>;
> + };
> +
> + map1 {
> + trip = <&package_fan1>;
> + cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
> + };
> + };
> +
> + trips {
> + package_fan0: package-fan0 {
> + hysteresis = <2000>;
> + temperature = <55000>;
> + type = "active";
> + };
> +
> + package_fan1: package-fan1 {
> + hysteresis = <2000>;
> + temperature = <65000>;
> + type = "active";
> + };
> + };
> +};
> +
> +/* NVMe */
> +&pcie2x1l1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pcie2x1l1_rst &pcie30x1m1_1_clkreqn &pcie30x1m1_1_waken>;
Is there a particular reason to use the GPIO mode for the reset pin,
rather than the (confusingly named) &pcie30x1m1_1_perstn in line with
the other two?
> + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
> + supports-clkreq;
> + vpcie3v3-supply = <&vcc_3v3_s3>;
> + status = "okay";
> +};
> +
> +/* NIC */
> +&pcie2x1l2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pcie2x1l2_rst>;
Similar to the above - have you tried the dedicated hardware mode for
this pin, i.e. &pcie20x1m0_perstn? You are not requesting the
&pcie20x1m0_clkreqn or &pcie20x1m0_waken either, even though they are
routed on the board - that will probably bite you if you try
suspending the board.
> + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
> + vpcie3v3-supply = <&vcc3v3_phy1>;
> + status = "okay";
> +};
> +
> +&pinctrl {
> + bluetooth {
> + bt_wake_gpio: bt-wake-pin {
> + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
If you care about power consumption of the board it's probably better
to pull this down to make sure the Bluetooth module is predictably in
a sleep state when not explicitly requested, not floating randomly.
There is no dedicated pull-up/pull-down on your board.
> + };
> +
> + bt_wake_host_irq: bt-wake-host-irq {
> + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
> + };
> + };
> +
> + dp {
> + dp_bridge_en: dp-bridge-en {
> + rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
This pin doesn't have any dedicated pull-up/pull-down on the board, so
you might end up in a weird power state for the period of time between
the probing of the pinctrl subsystem and regulators. Better set it to
&pcfg_pull_down, which matches the power-on-reset default state of
this pin.
> + };
> + };
> +
> + pcie {
> + pcie2x1l1_rst: pcie2x1l1-rst {
> + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + pcie2x1l2_rst: pcie2x1l2-rst {
> + rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + vcc3v3_phy1_en: vcc3v3-phy1-en {
The schematic calls this pin "Ethernet_EN", so perhaps use that in the
label and node name for easier reference.
> + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
As above: no dedicated pull resistors on the board, better set to
&pcfg_pull_down in line with POR default.
> + };
> + };
> +
> + usb {
> + vcc5v0_otg_en: vcc5v0-otg-en {
> + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
As above: no dedicated pull resistors on the board, better set to
&pcfg_pull_down in line with POR default.
> + };
> + };
> +
> + wlan {
> + wifi_enable_h: wifi-enable-h {
> + rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
As above: no dedicated pull resistors on the board, better set to
&pcfg_pull_down in line with POR default.
Best regards,
Alexey
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH v7 6/6] arm64: dts: rockchip: Add Orange Pi 5 Pro board support
2026-04-15 8:57 ` Alexey Charkov
@ 2026-04-15 23:34 ` Dennis Gilmore
0 siblings, 0 replies; 11+ messages in thread
From: Dennis Gilmore @ 2026-04-15 23:34 UTC (permalink / raw)
To: Alexey Charkov
Cc: Andrew Lunn, Andrzej Hajda, Chaoyi Chen, Conor Dooley,
David Airlie, devicetree, dri-devel, FUKAUMI Naoki,
Heiko Stuebner, Hsun Lai, Jernej Skrabec, Jimmy Hon, John Clark,
Jonas Karlman, Krzysztof Kozlowski, Laurent Pinchart,
linux-arm-kernel, linux-kernel, linux-rockchip, Maarten Lankhorst,
Maxime Ripard, Michael Opdenacker, Michael Riesch, Mykola Kvach,
Neil Armstrong, Peter Robinson, Quentin Schulz, Robert Foss,
Rob Herring, Simona Vetter, Thomas Zimmermann
Hi Alexey,
On Wed, Apr 15, 2026 at 3:57 AM Alexey Charkov <alchark@gmail.com> wrote:
>
> On Wed, Apr 15, 2026 at 1:41 AM Dennis Gilmore <dennis@ausil.us> wrote:
> >
> > Add device tree for the Xunlong Orange Pi 5 Pro (RK3588S).
> >
> > - eMMC module, you can optionally solder a SPI NOR in place and turn
> > off the eMMC
> > - PCIe-attached NIC (pcie2x1l1)
> > - PCIe NVMe slot (pcie2x1l2)
>
> Hi Dennis,
>
> Sashiko noticed [1] that the controller names here do not match the
> nodes/comments you have in the patch body - which ones are correct?
>
> [1] https://sashiko.dev/#/patchset/20260414214104.1363987-1-dennis%40ausil.us
The ones in the body are correct. will fix
> > - AP6256 WiFi (BCM43456) via SDIO with mmc-pwrseq
> > - BCM4345C5 Bluetooth
> > - es8388 audio
> > - USB 2.0 and USB 3.0
> > - Two HDMI ports, the second is connected to the SoC's DP controller
> > driven through a Lontium LT8711UXD bridge.
> >
> > Vendors schematics are available at:
> > https://drive.google.com/file/d/1qs1DratHuh7C6J6MEtQIwUsiSrg8qgTi/view
> >
> > Signed-off-by: Dennis Gilmore <dennis@ausil.us>
> > ---
> > arch/arm64/boot/dts/rockchip/Makefile | 1 +
> > .../dts/rockchip/rk3588s-orangepi-5-pro.dts | 442 ++++++++++++++++++
> > 2 files changed, 443 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > index 4d384f153c13..c99dca2ae9e7 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -214,6 +214,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-odroid-m2.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5b.dtb
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-5-pro.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-orangepi-cm5-base.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-radxa-cm5-io.dtb
> > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-roc-pc.dtb
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> > new file mode 100644
> > index 000000000000..61462c66753d
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts
> > @@ -0,0 +1,442 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +
> > +/dts-v1/;
> > +
> > +#include "rk3588s-orangepi-5.dtsi"
> > +
> > +/ {
> > + model = "Xunlong Orange Pi 5 Pro";
> > + compatible = "xunlong,orangepi-5-pro", "rockchip,rk3588s";
> > +
> > + aliases {
> > + mmc0 = &sdhci;
> > + mmc1 = &sdmmc;
> > + mmc2 = &sdio;
> > + };
> > +
> > + hdmi1-con {
> > + compatible = "hdmi-connector";
> > + label = "HDMI1 OUT";
> > + type = "a";
> > +
> > + port {
> > + hdmi1_con_in: endpoint {
> > + remote-endpoint = <<8711uxd_out>;
> > + };
> > + };
> > + };
> > +
> > + lt8711uxd {
>
> Please use a generic node name per DT convention. "hdmi-bridge" perhaps?
>
Will adopt hdmi-bridge
> > + compatible = "lontium,lt8711uxd";
>
> Don't you want to add "vdd-supply = <&vcc3v3_dp>;" here? It costs you
> nothing, as it's already in the binding and in the driver, and having
> this dependency listed explicitly will let the kernel order the driver
> probes correctly, and also likely let you drop the boot-on/always-on
> annotation from the regulator node.
I will add the supply and test drop the boot-on/always-on
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > +
> > + lt8711uxd_in: endpoint {
> > + remote-endpoint = <&dp0_out_con>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > +
> > + lt8711uxd_out: endpoint {
> > + remote-endpoint = <&hdmi1_con_in>;
> > + };
> > + };
> > + };
> > + };
> > +
> > + analog-sound {
> > + compatible = "simple-audio-card";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&hp_detect>;
> > + simple-audio-card,format = "i2s";
> > + simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
> > + simple-audio-card,mclk-fs = <256>;
> > + simple-audio-card,name = "rockchip,es8388";
> > + simple-audio-card,routing =
> > + "Headphones", "LOUT1",
> > + "Headphones", "ROUT1",
> > + "LINPUT1", "Microphone Jack",
> > + "RINPUT1", "Microphone Jack",
> > + "LINPUT2", "Onboard Microphone",
> > + "RINPUT2", "Onboard Microphone";
> > + simple-audio-card,widgets =
> > + "Microphone", "Microphone Jack",
> > + "Microphone", "Onboard Microphone",
> > + "Headphone", "Headphones";
> > +
> > + simple-audio-card,cpu {
> > + sound-dai = <&i2s2_2ch>;
> > + };
> > +
> > + simple-audio-card,codec {
> > + sound-dai = <&es8388>;
> > + system-clock-frequency = <12288000>;
> > + };
> > + };
> > +
> > + pwm-leds {
> > + compatible = "pwm-leds";
> > +
> > + led-0 {
> > + color = <LED_COLOR_ID_BLUE>;
> > + function = LED_FUNCTION_STATUS;
> > + linux,default-trigger = "heartbeat";
> > + max-brightness = <255>;
> > + pwms = <&pwm15 0 1000000 0>;
> > + };
> > +
> > + led-1 {
> > + color = <LED_COLOR_ID_GREEN>;
> > + function = LED_FUNCTION_ACTIVITY;
> > + linux,default-trigger = "heartbeat";
> > + max-brightness = <255>;
> > + pwms = <&pwm3 0 1000000 0>;
> > + };
> > + };
> > +
> > + fan: pwm-fan {
> > + compatible = "pwm-fan";
> > + #cooling-cells = <2>;
> > + cooling-levels = <0 50 100 150 200 255>;
> > + fan-supply = <&vcc5v0_sys>;
> > + pwms = <&pwm2 0 20000000 0>;
> > + };
> > +
> > + vcc3v3_dp: regulator-vcc3v3-dp {
> > + compatible = "regulator-fixed";
> > + enable-active-high;
> > + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&dp_bridge_en>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-name = "vcc3v3_dp";
> > + regulator-always-on;
> > + regulator-boot-on;
>
> Please see if you can drop these always-on/boot-on when vdd-supply is
> explicitly listed in the bridge node
>
I have tested removing these with the supply change listed, the HDMI
bridge fails to power on, it does work okay with regulator-always-on
only. It seems necessary to ensure that the bridge is active and that
HPD works. I am open to trying something else to ensure it all works
> > + vin-supply = <&vcc_3v3_s3>;
> > + };
> > +
> > + vcc3v3_phy1: regulator-vcc3v3-phy1 {
> > + compatible = "regulator-fixed";
> > + enable-active-high;
> > + gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&vcc3v3_phy1_en>;
>
> The board schematics call the pin "Ethernet_EN"
Will rename this
> > + regulator-max-microvolt = <3300000>;
> > + regulator-min-microvolt = <3300000>;
> > + regulator-name = "vcc3v3_phy1";
> > + startup-delay-us = <50000>;
> > + vin-supply = <&vcc_3v3_s3>;
> > + };
> > +
> > + vcc5v0_otg: regulator-vcc5v0-otg {
> > + compatible = "regulator-fixed";
> > + enable-active-high;
> > + gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&vcc5v0_otg_en>;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-min-microvolt = <5000000>;
> > + regulator-name = "vcc5v0_otg";
> > + vin-supply = <&vcc5v0_sys>;
> > + };
> > +
> > + sdio_pwrseq: sdio-pwrseq {
> > + compatible = "mmc-pwrseq-simple";
> > + clocks = <&hym8563>;
> > + clock-names = "ext_clock";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&wifi_enable_h>;
> > + post-power-on-delay-ms = <200>;
> > + reset-gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_LOW>;
> > + };
> > +
> > + typea_con: usb-a-connector {
> > + compatible = "usb-a-connector";
> > + data-role = "host";
> > + label = "USB3 Type-A";
> > + power-role = "source";
> > + vbus-supply = <&vcc5v0_otg>;
> > + };
> > +};
> > +
> > +&dp0 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&dp0m0_pins>;
> > + status = "okay";
> > +};
> > +
> > +&dp0_in {
> > + dp0_in_vp1: endpoint {
> > + remote-endpoint = <&vp1_out_dp0>;
> > + };
> > +};
> > +
> > +&dp0_out {
> > + dp0_out_con: endpoint {
> > + remote-endpoint = <<8711uxd_in>;
> > + };
> > +};
> > +
> > +&i2c1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c1m4_xfer>;
> > + status = "okay";
> > +};
> > +
> > +&i2c3 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c3m0_xfer>;
> > + status = "okay";
> > +
> > + es8388: audio-codec@11 {
> > + compatible = "everest,es8388", "everest,es8328";
> > + reg = <0x11>;
> > + #sound-dai-cells = <0>;
> > + AVDD-supply = <&vcca_3v3_s0>;
> > + DVDD-supply = <&vcca_1v8_s0>;
> > + HPVDD-supply = <&vcca_3v3_s0>;
> > + PVDD-supply = <&vcca_1v8_s0>;
> > + assigned-clock-rates = <12288000>;
> > + assigned-clocks = <&cru I2S2_2CH_MCLKOUT>;
> > + clocks = <&cru I2S2_2CH_MCLKOUT>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2s2m1_mclk>;
> > + };
> > +};
> > +
> > +&i2c4 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c4m3_xfer>;
> > + status = "okay";
> > +};
> > +
> > +&i2s2_2ch {
> > + pinctrl-0 = <&i2s2m1_lrck &i2s2m1_sclk
> > + &i2s2m1_sdi &i2s2m1_sdo>;
> > + status = "okay";
> > +};
> > +
> > +&package_thermal {
> > + polling-delay = <1000>;
> > +
> > + cooling-maps {
> > + map0 {
> > + trip = <&package_fan0>;
> > + cooling-device = <&fan THERMAL_NO_LIMIT 1>;
> > + };
> > +
> > + map1 {
> > + trip = <&package_fan1>;
> > + cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
> > + };
> > + };
> > +
> > + trips {
> > + package_fan0: package-fan0 {
> > + hysteresis = <2000>;
> > + temperature = <55000>;
> > + type = "active";
> > + };
> > +
> > + package_fan1: package-fan1 {
> > + hysteresis = <2000>;
> > + temperature = <65000>;
> > + type = "active";
> > + };
> > + };
> > +};
> > +
> > +/* NVMe */
> > +&pcie2x1l1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pcie2x1l1_rst &pcie30x1m1_1_clkreqn &pcie30x1m1_1_waken>;
>
> Is there a particular reason to use the GPIO mode for the reset pin,
> rather than the (confusingly named) &pcie30x1m1_1_perstn in line with
> the other two?
There is no particular reason. rk3588-turing-rk1.dtsi is the only
example in the kernel currently doing something similar, and it is
implemented that way there. I agree that the naming is confusing. I
will change it.
> > + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
> > + supports-clkreq;
> > + vpcie3v3-supply = <&vcc_3v3_s3>;
> > + status = "okay";
> > +};
> > +
> > +/* NIC */
> > +&pcie2x1l2 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pcie2x1l2_rst>;
>
> Similar to the above - have you tried the dedicated hardware mode for
> this pin, i.e. &pcie20x1m0_perstn? You are not requesting the
> &pcie20x1m0_clkreqn or &pcie20x1m0_waken either, even though they are
> routed on the board - that will probably bite you if you try
> suspending the board.
I have not, I also have not tried to suspend. Will adopt and test.
> > + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
> > + vpcie3v3-supply = <&vcc3v3_phy1>;
> > + status = "okay";
> > +};
> > +
> > +&pinctrl {
> > + bluetooth {
> > + bt_wake_gpio: bt-wake-pin {
> > + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
>
> If you care about power consumption of the board it's probably better
> to pull this down to make sure the Bluetooth module is predictably in
> a sleep state when not explicitly requested, not floating randomly.
> There is no dedicated pull-up/pull-down on your board.
Will do
> > + };
> > +
> > + bt_wake_host_irq: bt-wake-host-irq {
> > + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
> > + };
> > + };
> > +
> > + dp {
> > + dp_bridge_en: dp-bridge-en {
> > + rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
>
> This pin doesn't have any dedicated pull-up/pull-down on the board, so
> you might end up in a weird power state for the period of time between
> the probing of the pinctrl subsystem and regulators. Better set it to
> &pcfg_pull_down, which matches the power-on-reset default state of
> this pin.
Will do
> > + };
> > + };
> > +
> > + pcie {
> > + pcie2x1l1_rst: pcie2x1l1-rst {
> > + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > +
> > + pcie2x1l2_rst: pcie2x1l2-rst {
> > + rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
> > + };
> > +
> > + vcc3v3_phy1_en: vcc3v3-phy1-en {
>
> The schematic calls this pin "Ethernet_EN", so perhaps use that in the
> label and node name for easier reference.
Will do
> > + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
>
> As above: no dedicated pull resistors on the board, better set to
> &pcfg_pull_down in line with POR default.
Will do
> > + };
> > + };
> > +
> > + usb {
> > + vcc5v0_otg_en: vcc5v0-otg-en {
> > + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
>
> As above: no dedicated pull resistors on the board, better set to
> &pcfg_pull_down in line with POR default.
Will do
> > + };
> > + };
> > +
> > + wlan {
> > + wifi_enable_h: wifi-enable-h {
> > + rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
>
> As above: no dedicated pull resistors on the board, better set to
> &pcfg_pull_down in line with POR default.
will do
> Best regards,
> Alexey
I appreciate the feedback
Dennis
^ permalink raw reply [flat|nested] 11+ messages in thread