From: Dinh Nguyen <dinguyen@kernel.org>
To: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org
Cc: dinguyen@kernel.org, devicetree@vger.kernel.org
Subject: [PATCHv2 2/2] arm64: dts: socfpga: agilex7m: Add SoCFPGA Agilex7-M devkit
Date: Sun, 19 Apr 2026 18:24:16 -0500 [thread overview]
Message-ID: <20260419232416.68331-2-dinguyen@kernel.org> (raw)
In-Reply-To: <20260419232416.68331-1-dinguyen@kernel.org>
The Agilex7-M devkit contains an Agilex7M SoC, which is a newly branded
version of the original Agilex SoC. The Agilex7M core peripherals are
identical to the Agilex SoC.
We can re-use the socfpga_agilex.dtsi for this devkit. The Agilex7-M
devkit supports PCIE 5.0(x16), DDR4, DDR5, LPDDR5 and does not have QSPI.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: use the updated "altr,socfpga-agilex7m" and
"altr,socfpga-agilex7m-socdk"
---
arch/arm64/boot/dts/intel/Makefile | 1 +
.../boot/dts/intel/socfpga_agilex7m_socdk.dts | 104 ++++++++++++++++++
2 files changed, 105 insertions(+)
create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 33fcc55d0cb9..088a03b89c99 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -8,5 +8,6 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
socfpga_agilex5_socdk_013b.dtb \
socfpga_agilex5_socdk_modular.dtb \
socfpga_agilex5_socdk_nand.dtb \
+ socfpga_agilex7m_socdk.dtb \
socfpga_n5x_socdk.dtb
dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts
new file mode 100644
index 000000000000..952987cf3fd4
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex7m_socdk.dts
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2026 Altera Corporation
+
+#include "socfpga_agilex.dtsi"
+
+/ {
+ model = "Altera SoCFPGA Agilex7-M SoCDK";
+ compatible = "altr,socfpga-agilex7m-socdk",
+ "altr,socfpga-agilex7m";
+
+ aliases {
+ serial0 = &uart0;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led0 {
+ label = "hps_led0";
+ gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ led1 {
+ label = "hps_led1";
+ gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ led2 {
+ label = "hps_led2";
+ gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0x80000000 0 0>;
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&gmac0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+
+ max-frame-size = <9000>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+
+ txd0-skew-ps = <0>; /* -420ps */
+ txd1-skew-ps = <0>; /* -420ps */
+ txd2-skew-ps = <0>; /* -420ps */
+ txd3-skew-ps = <0>; /* -420ps */
+ rxd0-skew-ps = <420>; /* 0ps */
+ rxd1-skew-ps = <420>; /* 0ps */
+ rxd2-skew-ps = <420>; /* 0ps */
+ rxd3-skew-ps = <420>; /* 0ps */
+ txen-skew-ps = <0>; /* -420ps */
+ txc-skew-ps = <900>; /* 0ps */
+ rxdv-skew-ps = <420>; /* 0ps */
+ rxc-skew-ps = <1680>; /* 780ps */
+ };
+ };
+};
+
+&mmc {
+ status = "okay";
+ cap-sd-highspeed;
+ broken-cd;
+ bus-width = <4>;
+ clk-phase-sd-hs = <0>, <135>;
+};
+
+&osc1 {
+ clock-frequency = <25000000>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ disable-over-current;
+};
+
+&watchdog0 {
+ status = "okay";
+};
--
2.42.0.411.g813d9a9188
next prev parent reply other threads:[~2026-04-19 23:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-19 23:24 [PATCHv2 1/2] dt-bindings: arm: altera: document the Agilex7-M devkit Dinh Nguyen
2026-04-19 23:24 ` Dinh Nguyen [this message]
2026-04-20 16:13 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260419232416.68331-2-dinguyen@kernel.org \
--to=dinguyen@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox