* [PATCH v12 1/2] dt-bindings: embedded-controller: Add synology microp devices
2026-04-29 18:30 [PATCH v12 0/2] Introduce Synology Microp driver Markus Probst via B4 Relay
@ 2026-04-29 18:30 ` Markus Probst via B4 Relay
2026-04-29 18:30 ` [PATCH v12 2/2] platform: Add initial synology microp driver Markus Probst via B4 Relay
1 sibling, 0 replies; 3+ messages in thread
From: Markus Probst via B4 Relay @ 2026-04-29 18:30 UTC (permalink / raw)
To: Hans de Goede, Ilpo Järvinen, Bryan O'Donoghue,
Lee Jones, Pavel Machek, Miguel Ojeda, Boqun Feng, Gary Guo,
Björn Roy Baron, Benno Lossin, Andreas Hindborg, Alice Ryhl,
Trevor Gross, Danilo Krummrich, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Greg Kroah-Hartman
Cc: platform-driver-x86, linux-leds, devicetree, linux-kernel,
rust-for-linux, Markus Probst, Krzysztof Kozlowski
From: Markus Probst <markus.probst@posteo.de>
Add the Synology Microp devicetree bindings. Those devices are
microcontrollers found on Synology NAS devices. They are connected to a
serial port on the host device.
Those devices are used to control certain LEDs, fan speeds, a beeper, to
handle buttons, fan failures and to properly shutdown and reboot the
device.
The device has a different feature set depending on the Synology NAS
model, like having different number of fans, buttons and leds. Depending
on the architecture of the model, they also need a different system
shutdown behaviour.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Markus Probst <markus.probst@posteo.de>
---
.../synology,ds918p-microp.yaml | 100 +++++++++++++++++++++
1 file changed, 100 insertions(+)
diff --git a/Documentation/devicetree/bindings/embedded-controller/synology,ds918p-microp.yaml b/Documentation/devicetree/bindings/embedded-controller/synology,ds918p-microp.yaml
new file mode 100644
index 000000000000..eb1c9d3fac07
--- /dev/null
+++ b/Documentation/devicetree/bindings/embedded-controller/synology,ds918p-microp.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/embedded-controller/synology,ds918p-microp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synology NAS on-board Microcontroller
+
+maintainers:
+ - Markus Probst <markus.probst@posteo.de>
+
+description: |
+ Synology Microp is a microcontroller found in Synology NAS devices.
+ It is connected to a serial port on the host device.
+
+ It is necessary to properly shutdown and reboot the NAS device and
+ provides additional functionality such as led control, fan speed control,
+ a beeper and buttons on the NAS device.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - synology,ds1221rpp-microp
+ - synology,rs822p-microp
+ - synology,rs422p-microp
+ - const: synology,rs1221p-microp
+
+ - items:
+ - const: synology,ds1825p-microp
+ - const: synology,ds1823xsp-microp
+
+ - items:
+ - enum:
+ - synology,ds725p-microp
+ - synology,ds225p-microp
+ - synology,ds723p-microp
+ - synology,ds710p-microp
+ - const: synology,ds214play-microp
+
+ - items:
+ - enum:
+ - synology,ds425p-microp
+ - synology,ds1525p-microp
+ - synology,ds925p-microp
+ - synology,ds923p-microp
+ - synology,ds1522p-microp
+ - synology,ds1010p-microp
+ - synology,ds411p-microp
+ - const: synology,ds918p-microp
+
+ - items:
+ - enum:
+ - synology,ds124-microp
+ - synology,ds223j-microp
+ - synology,ds223-microp
+ - const: synology,ds118-microp
+
+ - enum:
+ - synology,ds118-microp
+ - synology,ds1823xsp-microp
+ - synology,rs1221p-microp
+ - synology,ds918p-microp
+ - synology,ds214play-microp
+
+ fan-failure-gpios:
+ description: GPIOs needed to determine which fans stopped working on a fan failure event.
+ minItems: 2
+ maxItems: 3
+
+required:
+ - compatible
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - synology,ds918p-microp
+ - synology,rs422p-microp
+ then:
+ required:
+ - fan-failure-gpios
+ else:
+ properties:
+ fan-failure-gpios: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ embedded-controller {
+ compatible = "synology,ds923p-microp", "synology,ds918p-microp";
+
+ fan-failure-gpios = <&gpio 68 GPIO_ACTIVE_HIGH>, <&gpio 69 GPIO_ACTIVE_HIGH>;
+ };
--
2.53.0
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH v12 2/2] platform: Add initial synology microp driver
2026-04-29 18:30 [PATCH v12 0/2] Introduce Synology Microp driver Markus Probst via B4 Relay
2026-04-29 18:30 ` [PATCH v12 1/2] dt-bindings: embedded-controller: Add synology microp devices Markus Probst via B4 Relay
@ 2026-04-29 18:30 ` Markus Probst via B4 Relay
1 sibling, 0 replies; 3+ messages in thread
From: Markus Probst via B4 Relay @ 2026-04-29 18:30 UTC (permalink / raw)
To: Hans de Goede, Ilpo Järvinen, Bryan O'Donoghue,
Lee Jones, Pavel Machek, Miguel Ojeda, Boqun Feng, Gary Guo,
Björn Roy Baron, Benno Lossin, Andreas Hindborg, Alice Ryhl,
Trevor Gross, Danilo Krummrich, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Greg Kroah-Hartman
Cc: platform-driver-x86, linux-leds, devicetree, linux-kernel,
rust-for-linux, Markus Probst
From: Markus Probst <markus.probst@posteo.de>
Add a initial synology microp driver, written in Rust.
The driver targets a microcontroller found in Synology NAS devices. It
currently only supports controlling of the power led, status led, alert
led and usb led. Other components such as fan control or handling
on-device buttons will be added once the required rust abstractions are
there.
This driver can be used both on arm and x86, thus it goes into the root
directory of drivers/platform.
Tested successfully on a Synology DS923+.
Signed-off-by: Markus Probst <markus.probst@posteo.de>
---
MAINTAINERS | 7 +
drivers/platform/Kconfig | 2 +
drivers/platform/Makefile | 1 +
drivers/platform/synology_microp/Kconfig | 13 +
drivers/platform/synology_microp/Makefile | 3 +
drivers/platform/synology_microp/command.rs | 54 ++++
drivers/platform/synology_microp/led.rs | 287 +++++++++++++++++++++
drivers/platform/synology_microp/model.rs | 49 ++++
.../platform/synology_microp/synology_microp.rs | 90 +++++++
9 files changed, 506 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 1cce5359c23e..779cadd74df8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -25785,6 +25785,13 @@ F: drivers/dma-buf/sync_*
F: include/linux/sync_file.h
F: include/uapi/linux/sync_file.h
+SYNOLOGY MICROP DRIVER
+M: Markus Probst <markus.probst@posteo.de>
+L: platform-driver-x86@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/embedded-controller/synology,ds918p-microp.yaml
+F: drivers/platform/synology_microp/
+
SYNOPSYS ARC ARCHITECTURE
M: Vineet Gupta <vgupta@kernel.org>
L: linux-snps-arc@lists.infradead.org
diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index 312788f249c9..996050566a4a 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -22,3 +22,5 @@ source "drivers/platform/arm64/Kconfig"
source "drivers/platform/raspberrypi/Kconfig"
source "drivers/platform/wmi/Kconfig"
+
+source "drivers/platform/synology_microp/Kconfig"
diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
index fa322e7f8716..2381872e9133 100644
--- a/drivers/platform/Makefile
+++ b/drivers/platform/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_SURFACE_PLATFORMS) += surface/
obj-$(CONFIG_ARM64_PLATFORM_DEVICES) += arm64/
obj-$(CONFIG_BCM2835_VCHIQ) += raspberrypi/
obj-$(CONFIG_ACPI_WMI) += wmi/
+obj-$(CONFIG_SYNOLOGY_MICROP) += synology_microp/
diff --git a/drivers/platform/synology_microp/Kconfig b/drivers/platform/synology_microp/Kconfig
new file mode 100644
index 000000000000..8878cfb7bcdd
--- /dev/null
+++ b/drivers/platform/synology_microp/Kconfig
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config SYNOLOGY_MICROP
+ tristate "Synology Microp driver"
+ depends on LEDS_CLASS && LEDS_CLASS_MULTICOLOR
+ depends on RUST_SERIAL_DEV_BUS_ABSTRACTIONS
+ help
+ Enable support for the EC found in Synology NAS devices.
+
+ This is needed to properly shutdown and reboot the device, as well as
+ additional functionality like fan and LED control.
+
+ This driver is work in progress and may not be fully functional.
diff --git a/drivers/platform/synology_microp/Makefile b/drivers/platform/synology_microp/Makefile
new file mode 100644
index 000000000000..63585ccf76e4
--- /dev/null
+++ b/drivers/platform/synology_microp/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-y += synology_microp.o
diff --git a/drivers/platform/synology_microp/command.rs b/drivers/platform/synology_microp/command.rs
new file mode 100644
index 000000000000..58cb2f3cb3da
--- /dev/null
+++ b/drivers/platform/synology_microp/command.rs
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+
+use kernel::{
+ device::Bound,
+ error::Result,
+ serdev, //
+};
+
+use crate::led;
+
+#[expect(
+ clippy::enum_variant_names,
+ reason = "future variants will not end with Led"
+)]
+pub(crate) enum Command {
+ PowerLed(led::State),
+ StatusLed(led::StatusLedColor, led::State),
+ AlertLed(led::State),
+ UsbLed(led::State),
+ EsataLed(led::State),
+}
+
+impl Command {
+ pub(crate) fn write(self, dev: &serdev::Device<Bound>) -> Result {
+ dev.write_all(
+ match self {
+ Self::PowerLed(led::State::On) => &[0x34],
+ Self::PowerLed(led::State::Blink) => &[0x35],
+ Self::PowerLed(led::State::Off) => &[0x36],
+
+ Self::StatusLed(_, led::State::Off) => &[0x37],
+ Self::StatusLed(led::StatusLedColor::Green, led::State::On) => &[0x38],
+ Self::StatusLed(led::StatusLedColor::Green, led::State::Blink) => &[0x39],
+ Self::StatusLed(led::StatusLedColor::Amber, led::State::On) => &[0x3A],
+ Self::StatusLed(led::StatusLedColor::Amber, led::State::Blink) => &[0x3B],
+
+ Self::AlertLed(led::State::On) => &[0x4C, 0x41, 0x31],
+ Self::AlertLed(led::State::Blink) => &[0x4C, 0x41, 0x32],
+ Self::AlertLed(led::State::Off) => &[0x4C, 0x41, 0x33],
+
+ Self::UsbLed(led::State::On) => &[0x40],
+ Self::UsbLed(led::State::Blink) => &[0x41],
+ Self::UsbLed(led::State::Off) => &[0x42],
+
+ Self::EsataLed(led::State::On) => &[0x4C, 0x45, 0x31],
+ Self::EsataLed(led::State::Blink) => &[0x4C, 0x45, 0x32],
+ Self::EsataLed(led::State::Off) => &[0x4C, 0x45, 0x33],
+ },
+ serdev::Timeout::Max,
+ )?;
+ dev.wait_until_sent(serdev::Timeout::Max);
+ Ok(())
+ }
+}
diff --git a/drivers/platform/synology_microp/led.rs b/drivers/platform/synology_microp/led.rs
new file mode 100644
index 000000000000..8b8d1ba531ab
--- /dev/null
+++ b/drivers/platform/synology_microp/led.rs
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0
+
+use kernel::{
+ device::Bound,
+ devres::{
+ self,
+ Devres, //
+ },
+ led::{
+ self,
+ LedOps,
+ MultiColorSubLed, //
+ },
+ new_mutex,
+ prelude::*,
+ serdev,
+ str::CString,
+ sync::Mutex,
+ time::Delta, //
+};
+use pin_init::pin_init_scope;
+
+use crate::{
+ command::Command,
+ model::Model, //
+};
+
+#[pin_data]
+pub(crate) struct Data {
+ #[pin]
+ status: Devres<led::MultiColorDevice<StatusLedHandler>>,
+ power_name: CString,
+ #[pin]
+ power: Devres<led::Device<LedHandler>>,
+}
+
+impl Data {
+ pub(super) fn register<'a>(
+ dev: &'a serdev::Device<Bound>,
+ model: &'a Model,
+ ) -> impl PinInit<Self, Error> + 'a {
+ pin_init_scope(move || {
+ if let Some(color) = model.led_alert {
+ let name =
+ CString::try_from_fmt(fmt!("synology:{}:alarm", color.as_c_str().to_str()?))?;
+ devres::register(
+ dev.as_ref(),
+ led::DeviceBuilder::new().color(color).name(&name).build(
+ dev,
+ try_pin_init!(LedHandler {
+ blink <- new_mutex!(false),
+ command: Command::AlertLed,
+ }),
+ ),
+ GFP_KERNEL,
+ )?;
+ }
+
+ if model.led_usb_copy {
+ devres::register(
+ dev.as_ref(),
+ led::DeviceBuilder::new()
+ .color(led::Color::Green)
+ .name(c"synology:green:usb")
+ .build(
+ dev,
+ try_pin_init!(LedHandler {
+ blink <- new_mutex!(false),
+ command: Command::UsbLed,
+ }),
+ ),
+ GFP_KERNEL,
+ )?;
+ }
+
+ if model.led_esata {
+ devres::register(
+ dev.as_ref(),
+ led::DeviceBuilder::new()
+ .color(led::Color::Green)
+ .name(c"synology:green:esata")
+ .build(
+ dev,
+ try_pin_init!(LedHandler {
+ blink <- new_mutex!(false),
+ command: Command::EsataLed,
+ }),
+ ),
+ GFP_KERNEL,
+ )?;
+ }
+
+ Ok(try_pin_init!(Self {
+ status <- led::DeviceBuilder::new()
+ .color(led::Color::Multi)
+ .name(c"synology:multicolor:status")
+ .build_multicolor(
+ dev,
+ try_pin_init!(StatusLedHandler {
+ blink <- new_mutex!(false),
+ }),
+ StatusLedHandler::SUBLEDS,
+ ),
+ power_name: CString::try_from_fmt(fmt!(
+ "synology:{}:power",
+ model.led_power.as_c_str().to_str()?
+ ))?,
+ power <- led::DeviceBuilder::new()
+ .color(model.led_power)
+ .name(power_name)
+ .build(
+ dev,
+ try_pin_init!(LedHandler {
+ blink <- new_mutex!(true),
+ command: Command::PowerLed,
+ }),
+ ),
+ }))
+ })
+ }
+}
+
+#[derive(Copy, Clone)]
+pub(crate) enum StatusLedColor {
+ Green,
+ Amber,
+}
+
+#[derive(Copy, Clone)]
+pub(crate) enum State {
+ On,
+ Blink,
+ Off,
+}
+
+#[pin_data]
+struct LedHandler {
+ #[pin]
+ blink: Mutex<bool>,
+ command: fn(State) -> Command,
+}
+
+/// Blink delay measured using video recording on DS923+ for Power and Status Led.
+///
+/// We assume it is the same for all other leds and models.
+const BLINK_DELAY: Delta = Delta::from_millis(167);
+
+#[vtable]
+impl LedOps for LedHandler {
+ type Bus = serdev::Device<Bound>;
+ type Mode = led::Normal;
+ const BLOCKING: bool = true;
+ const MAX_BRIGHTNESS: u32 = 1;
+
+ fn brightness_set(
+ &self,
+ dev: &Self::Bus,
+ _classdev: &led::Device<Self>,
+ brightness: u32,
+ ) -> Result<()> {
+ let mut blink = self.blink.lock();
+ (self.command)(if brightness == 0 {
+ *blink = false;
+ State::Off
+ } else if *blink {
+ State::Blink
+ } else {
+ State::On
+ })
+ .write(dev)?;
+
+ Ok(())
+ }
+
+ fn blink_set(
+ &self,
+ dev: &Self::Bus,
+ _classdev: &led::Device<Self>,
+ delay_on: &mut usize,
+ delay_off: &mut usize,
+ ) -> Result<()> {
+ let mut blink = self.blink.lock();
+
+ (self.command)(if *delay_on == 0 && *delay_off != 0 {
+ *blink = false;
+
+ State::Off
+ } else if *delay_on != 0 && *delay_off == 0 {
+ *blink = false;
+
+ State::On
+ } else {
+ *blink = true;
+ *delay_on = BLINK_DELAY.as_millis() as usize;
+ *delay_off = BLINK_DELAY.as_millis() as usize;
+
+ State::Blink
+ })
+ .write(dev)
+ }
+}
+
+#[pin_data]
+struct StatusLedHandler {
+ #[pin]
+ blink: Mutex<bool>,
+}
+
+impl StatusLedHandler {
+ const SUBLEDS: &[MultiColorSubLed] = &[
+ MultiColorSubLed::new(led::Color::Green).initial_intensity(1),
+ MultiColorSubLed::new(led::Color::Amber),
+ ];
+}
+
+#[vtable]
+impl LedOps for StatusLedHandler {
+ type Bus = serdev::Device<Bound>;
+ type Mode = led::MultiColor;
+ const BLOCKING: bool = true;
+ const MAX_BRIGHTNESS: u32 = 1;
+
+ fn brightness_set(
+ &self,
+ dev: &Self::Bus,
+ classdev: &led::MultiColorDevice<Self>,
+ brightness: u32,
+ ) -> Result<()> {
+ let mut blink = self.blink.lock();
+ if brightness == 0 {
+ *blink = false;
+ }
+
+ let (color, subled_brightness) = if classdev.subleds()[1].intensity == 0 {
+ (StatusLedColor::Green, classdev.subleds()[0].brightness)
+ } else {
+ (StatusLedColor::Amber, classdev.subleds()[1].brightness)
+ };
+
+ Command::StatusLed(
+ color,
+ if subled_brightness == 0 {
+ State::Off
+ } else if *blink {
+ State::Blink
+ } else {
+ State::On
+ },
+ )
+ .write(dev)
+ }
+
+ fn blink_set(
+ &self,
+ dev: &Self::Bus,
+ classdev: &led::MultiColorDevice<Self>,
+ delay_on: &mut usize,
+ delay_off: &mut usize,
+ ) -> Result<()> {
+ let mut blink = self.blink.lock();
+ *blink = true;
+
+ let (color, subled_intensity) = if classdev.subleds()[1].intensity == 0 {
+ (StatusLedColor::Green, classdev.subleds()[0].intensity)
+ } else {
+ (StatusLedColor::Amber, classdev.subleds()[1].intensity)
+ };
+ Command::StatusLed(
+ color,
+ if *delay_on == 0 && *delay_off != 0 {
+ *blink = false;
+ State::Off
+ } else if subled_intensity == 0 {
+ State::Off
+ } else if *delay_on != 0 && *delay_off == 0 {
+ *blink = false;
+ State::On
+ } else {
+ *delay_on = BLINK_DELAY.as_millis() as usize;
+ *delay_off = BLINK_DELAY.as_millis() as usize;
+
+ State::Blink
+ },
+ )
+ .write(dev)
+ }
+}
diff --git a/drivers/platform/synology_microp/model.rs b/drivers/platform/synology_microp/model.rs
new file mode 100644
index 000000000000..715d8840f56b
--- /dev/null
+++ b/drivers/platform/synology_microp/model.rs
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+
+use kernel::led::Color;
+
+pub(crate) struct Model {
+ pub(crate) led_power: Color,
+ pub(crate) led_alert: Option<Color>,
+ pub(crate) led_usb_copy: bool,
+ pub(crate) led_esata: bool,
+}
+
+impl Model {
+ pub(super) const fn new() -> Self {
+ Self {
+ led_power: Color::Blue,
+ led_alert: None,
+ led_usb_copy: false,
+ led_esata: false,
+ }
+ }
+
+ pub(super) const fn led_power(self, color: Color) -> Self {
+ Self {
+ led_power: color,
+ ..self
+ }
+ }
+
+ pub(super) const fn led_alert(self, color: Color) -> Self {
+ Self {
+ led_alert: Some(color),
+ ..self
+ }
+ }
+
+ pub(super) const fn led_esata(self) -> Self {
+ Self {
+ led_esata: true,
+ ..self
+ }
+ }
+
+ pub(super) const fn led_usb_copy(self) -> Self {
+ Self {
+ led_usb_copy: true,
+ ..self
+ }
+ }
+}
diff --git a/drivers/platform/synology_microp/synology_microp.rs b/drivers/platform/synology_microp/synology_microp.rs
new file mode 100644
index 000000000000..1327d30182de
--- /dev/null
+++ b/drivers/platform/synology_microp/synology_microp.rs
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+
+//! Synology Microp driver
+
+use kernel::{
+ device,
+ led::Color,
+ of::{
+ DeviceId,
+ IdTable, //
+ },
+ of_device_table,
+ prelude::*,
+ serdev, //
+};
+use pin_init::pin_init_scope;
+
+use crate::model::Model;
+
+pub(crate) mod command;
+mod led;
+mod model;
+
+kernel::module_serdev_device_driver! {
+ type: SynologyMicropDriver,
+ name: "synology_microp",
+ authors: ["Markus Probst <markus.probst@posteo.de>"],
+ description: "Synology Microp driver",
+ license: "GPL v2",
+}
+
+#[rustfmt::skip]
+of_device_table!(
+ OF_TABLE,
+ MODULE_OF_TABLE,
+ Model,
+ [
+ // apollolake
+ (DeviceId::new(c"synology,ds918p-microp"), Model::new()),
+
+ // evansport
+ (DeviceId::new(c"synology,ds214play-microp"), Model::new()),
+
+ // geminilakenk
+ (DeviceId::new(c"synology,ds225p-microp"), Model::new().led_usb_copy()),
+
+ // pineview
+ (DeviceId::new(c"synology,ds710p-microp"), Model::new().led_esata()),
+ (DeviceId::new(c"synology,ds1010p-microp"), Model::new().led_alert(Color::Amber)),
+
+ // rtd1296
+ (DeviceId::new(c"synology,ds118-microp"), Model::new()),
+
+ // rtd1619b
+ (DeviceId::new(c"synology,ds223-microp"), Model::new().led_usb_copy()),
+
+ // v1000
+ (DeviceId::new(c"synology,ds1823xsp-microp"), Model::new()),
+ (DeviceId::new(c"synology,rs1221p-microp"), Model::new().led_power(Color::Green)),
+ ]
+);
+
+#[pin_data]
+struct SynologyMicropDriver {
+ #[pin]
+ led: led::Data,
+}
+
+#[vtable]
+impl<'a> serdev::Driver<'a> for SynologyMicropDriver {
+ type IdInfo = Model;
+ const OF_ID_TABLE: Option<IdTable<Self::IdInfo>> = Some(&OF_TABLE);
+
+ fn probe(
+ dev: &'a serdev::Device<device::Core>,
+ model: Option<&'a Model>,
+ ) -> impl PinInit<Self, kernel::error::Error> + 'a {
+ pin_init_scope(move || {
+ let model = model.ok_or(EINVAL)?;
+
+ dev.set_baudrate(9600).map_err(|_| EINVAL)?;
+ dev.set_flow_control(false);
+ dev.set_parity(serdev::Parity::None)?;
+
+ Ok(try_pin_init!(Self {
+ led <- led::Data::register(dev, model),
+ }))
+ })
+ }
+}
--
2.53.0
^ permalink raw reply related [flat|nested] 3+ messages in thread