[PATCH v6 0/6] arm64: dts: qcom: Support AYN QCS8550 Devices

[PATCH v6 0/6] arm64: dts: qcom: Support AYN QCS8550 Devices

[Aaron Kling via B4 Relay]

This specifically includes:
* Odin 2 Mini
* Odin 2 Portal
* Thor

The original Odin 2 dts is not currently included as it has not yet
been verified.

The initial port was done by Teguh Sobirin for ROCKNIX and was made
available on the AYN github [0].

Support has been removed for things not yet supported by the upstream
kernel, these will be added later when the related drivers are submitted
and picked up. Such includes:

* All panels
* The Odin 2 Mini backlight and touch
* All rgb leds
* The built-in uart gamepad

[0] https://github.com/AYNTechnologies/linux/commits/sm8550/v6.17.5/

Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
Changes in v6:
- Fix comment style in patch 3
- Drop a pair of unnecessary pinmuxes in patch 3
- Lower usb sbu pins drive strength in patch 3
- Link to v5: https://lore.kernel.org/r/20260408-ayn-qcs8550-v5-0-c90abeb7a152@gmail.com

Changes in v5:
- Fix some style reviews in patch 6 which required matching labels in
  patch 3
- Drop hdmi support in patch 4, since it doesn't work
- Link to v4: https://lore.kernel.org/r/20260323-ayn-qcs8550-v4-0-33a8ac3d53fa@gmail.com

Changes in v4:
- Fold vendor description patch into the series
- Link to v3: https://lore.kernel.org/r/20260322-ayn-qcs8550-v3-0-4afa89c20888@gmail.com

Changes in v3:
- Drop unused backlight regulator in patch 3
- Move zap shader firmware to standalone reference
- Move i2c controller enables from common to devices
- Add ABL dtbo workarounds to patch 2 as per:
  https://lore.kernel.org/linux-arm-msm/dczz4uvcq4hc6p3zb6xnrsgmfeomwliagwhf36tewdz4z6mndp@afbxzhjziiwv/
- Fix multiple property alphabetical order issues in patch 2
- Use interrupts-extended for pwm-fan in patch 2
- Ensure blank line before status in patches 2-5
- Rename spk_amp_l/r to amplifier in patch 2
- Remove a few properties that are already in the soc dtsi in patch 2
- Order tlmm nodes by pin index in patch 2
- Drop qcom,dll-config from sdhc node in patch 2
- Drop dtbo support, convert common to dtsi, and include it directly in
  device specific dts'
- Link to v2: https://lore.kernel.org/r/20260311-ayn-qcs8550-v2-0-e66986e0f0cb@gmail.com

Changes in v2:
- Drop awinic bindings dep as a duplicated patch already exists
- Change Co-authored-by tags to Co-developed-by
- Drop alias to currently unused uart15 in patch 2
- Link to v1: https://lore.kernel.org/r/20260311-ayn-qcs8550-v1-0-fe8b2faad1ea@gmail.com

---
Aaron Kling (1):
      dt-bindings: arm: qcom: Add AYN QCS8550 Devices

Teguh Sobirin (4):
      arm64: dts: qcom: Add AYN QCS8550 Common
      arm64: dts: qcom: Add AYN Odin 2 Mini
      arm64: dts: qcom: Add AYN Odin 2 Portal
      arm64: dts: qcom: Add AYN Thor

Xilin Wu (1):
      dt-bindings: vendor-prefixes: Add AYN Technologies

 Documentation/devicetree/bindings/arm/qcom.yaml    |    9 +
 .../devicetree/bindings/vendor-prefixes.yaml       |    2 +
 arch/arm64/boot/dts/qcom/Makefile                  |    3 +
 .../arm64/boot/dts/qcom/qcs8550-ayntec-common.dtsi | 1740 ++++++++++++++++++++
 .../boot/dts/qcom/qcs8550-ayntec-odin2mini.dts     |   44 +
 .../boot/dts/qcom/qcs8550-ayntec-odin2portal.dts   |   84 +
 arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts   |  227 +++
 7 files changed, 2109 insertions(+)
---
base-commit: b9303e6bff706758c167af686b5315ad00233bf8
change-id: 20260217-ayn-qcs8550-16c07b63de26

Best regards,
-- 
Aaron Kling <webgeek1234@gmail.com>

[PATCH v6 1/6] dt-bindings: vendor-prefixes: Add AYN Technologies

[Aaron Kling via B4 Relay]

From: Xilin Wu <wuxilin123@gmail.com>

Add an entry for AYN Technologies (https://www.ayntec.com/)

Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 28784d66ae7ba5..b891d6d41f198a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -225,6 +225,8 @@ patternProperties:
     description: Axis Communications AB
   "^ayaneo,.*":
     description: Anyun Intelligent Technology (Hong Kong) Co., Ltd
+  "^ayntec,.*":
+    description: AYN Technologies Co., Ltd.
   "^azoteq,.*":
     description: Azoteq (Pty) Ltd
   "^azw,.*":

-- 
2.53.0

[PATCH v6 2/6] dt-bindings: arm: qcom: Add AYN QCS8550 Devices

[Aaron Kling via B4 Relay]

From: Aaron Kling <webgeek1234@gmail.com>

Namely:
* Odin 2
* Odin 2 Mini
* Odin 2 Portal
* Thor

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index b4943123d2e425..4a6733eaa8b14d 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -1099,6 +1099,15 @@ properties:
           - const: qcom,qcs8550
           - const: qcom,sm8550
 
+      - items:
+          - enum:
+              - ayntec,odin2
+              - ayntec,odin2mini
+              - ayntec,odin2portal
+              - ayntec,thor
+          - const: qcom,qcs8550
+          - const: qcom,sm8550
+
       - items:
           - enum:
               - ayaneo,pocket-s2

-- 
2.53.0

[PATCH v6 3/6] arm64: dts: qcom: Add AYN QCS8550 Common

[Aaron Kling via B4 Relay]

From: Teguh Sobirin <teguh@sobir.in>

This contains everything common between the AYN QCS8550 devices. It will
be included by device specific dts'.

Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
 .../arm64/boot/dts/qcom/qcs8550-ayntec-common.dtsi | 1740 ++++++++++++++++++++
 1 file changed, 1740 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayntec-common.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-common.dtsi
new file mode 100644
index 00000000000000..d5b1ba4ec92663
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-common.dtsi
@@ -0,0 +1,1740 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Teguh Sobirin.
+ */
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcs8550.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+
+/delete-node/ &aop_image_mem;
+/delete-node/ &aop_config_mem;
+/delete-node/ &camera_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &mpss_dsm_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &q6_mpss_dtb_mem;
+/delete-node/ &remoteproc_mpss;
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+		serial1 = &uart14;
+	};
+
+	/* The tzlog label is required by ABL to apply a dtbo, but it can be on any node */
+	qcom_tzlog: chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			debounce-interval = <15>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&usb0_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	pwm_fan: pwm-fan {
+		compatible = "pwm-fan";
+
+		fan-supply = <&vdd_fan_5v0>;
+		pwms = <&pm8550_pwm 3 50000>;
+
+		pinctrl-0 = <&fan_pwm_active>, <&fan_int>;
+		pinctrl-names = "default";
+
+		pulses-per-revolution = <4>;
+		interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+
+		cooling-levels = <0 40 65 75 90 100 120 150 175>;
+		#cooling-cells = <2>;
+	};
+
+	reserved-memory {
+		hyp_mem: hyp-region@80000000 {
+			reg = <0 0x80000000 0 0xa00000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: cpusys-vm-region@80a00000 {
+			reg = <0 0x80a00000 0 0x400000>;
+			no-map;
+		};
+
+		hyp_tags_mem: hyp-tags-region@80e00000 {
+			reg = <0 0x80e00000 0 0x3d0000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc-region@d8100000 {
+			reg = <0 0xd8100000 0 0x40000>;
+			no-map;
+		};
+
+		hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 {
+			reg = <0 0x811d0000 0 0x30000>;
+			no-map;
+		};
+
+		xbl_dt_log_merged_mem: xbl-dt-log-merged-region@81a00000 {
+			reg = <0 0x81a00000 0 0x260000>;
+			no-map;
+		};
+
+		aop_config_merged_mem: aop-config-merged-region@81c80000 {
+			reg = <0 0x81c80000 0 0x74000>;
+			no-map;
+		};
+
+		chipinfo_mem: chipinfo-region@81cf4000 {
+			reg = <0 0x81cf4000 0 0x1000>;
+			no-map;
+		};
+
+		global_sync_mem: global-sync-region@82600000 {
+			reg = <0 0x82600000 0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat-region@82700000 {
+			reg = <0 0x82700000 0 0x100000>;
+			no-map;
+		};
+
+		cpucp_fw_mem: cpucp-fw-region@d8140000 {
+			reg = <0 0xd8140000 0 0x1c0000>;
+			no-map;
+		};
+
+		qtee_mem: qtee-region@d8300000 {
+			reg = <0 0xd8300000 0 0x500000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf-region@e6440000 {
+			reg = <0 0xe6440000 0 0x2dd000>;
+			no-map;
+		};
+
+		hyp_ext_reserved_mem: hyp-ext-reserved-region@ff700000 {
+			reg = <0 0xff700000 0 0x100000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc_lpi_region@ff800000 {
+			reg = <0 0xff800000 0 0x600000>;
+			no-map;
+		};
+
+		hyp_ext_tags_mem: hyp-ext-tags-region@fce00000 {
+			reg = <0 0xfce00000 0 0x2900000>;
+			no-map;
+		};
+	};
+
+	sound {
+		compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
+		pinctrl-0 = <&lpi_i2s3_active>;
+		pinctrl-names = "default";
+
+		model = "AYN-Odin2";
+		audio-routing = "IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		speaker-i2s-dai-link {
+			link-name = "Primary MI2S Playback";
+
+			codec {
+				sound-dai = <&spk_amp_l>, <&spk_amp_r>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		dp0-dai-link {
+			link-name = "DP0 Playback";
+
+			codec {
+				sound-dai = <&mdss_dp0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai DISPLAY_PORT_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay = <200>;
+
+			trips {
+				cpuss0_active0: cpu-active0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss0_active1: cpu-active1 {
+					temperature = <55000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss0_active2: cpu-active2 {
+					temperature = <60000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss0_active3: cpu-active3 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss0_active4: cpu-active4 {
+					temperature = <70000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss0_active5: cpu-active5 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss0_active6: cpu-active6 {
+					temperature = <80000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss0_active7: cpu-active7 {
+					temperature = <85000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					cooling-device = <&pwm_fan 0 1>;
+					trip = <&cpuss0_active0>;
+				};
+
+				map1 {
+					cooling-device = <&pwm_fan 1 2>;
+					trip = <&cpuss0_active1>;
+				};
+
+				map2 {
+					cooling-device = <&pwm_fan 2 3>;
+					trip = <&cpuss0_active2>;
+				};
+
+				map3 {
+					cooling-device = <&pwm_fan 3 4>;
+					trip = <&cpuss0_active3>;
+				};
+
+				map4 {
+					cooling-device = <&pwm_fan 4 5>;
+					trip = <&cpuss0_active4>;
+				};
+
+				map5 {
+					cooling-device = <&pwm_fan 5 6>;
+					trip = <&cpuss0_active5>;
+				};
+
+				map6 {
+					cooling-device = <&pwm_fan 6 7>;
+					trip = <&cpuss0_active6>;
+				};
+
+				map7 {
+					cooling-device = <&pwm_fan 7 8>;
+					trip = <&cpuss0_active7>;
+				};
+			};
+		};
+
+		cpu3-bottom-thermal {
+			polling-delay = <200>;
+
+			trips {
+				cpuss3_active0: cpu-active0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss3_active1: cpu-active1 {
+					temperature = <55000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss3_active2: cpu-active2 {
+					temperature = <60000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss3_active3: cpu-active3 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss3_active4: cpu-active4 {
+					temperature = <70000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss3_active5: cpu-active5 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss3_active6: cpu-active6 {
+					temperature = <80000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss3_active7: cpu-active7 {
+					temperature = <85000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					cooling-device = <&pwm_fan 0 1>;
+					trip = <&cpuss3_active0>;
+				};
+
+				map1 {
+					cooling-device = <&pwm_fan 1 2>;
+					trip = <&cpuss3_active1>;
+				};
+
+				map2 {
+					cooling-device = <&pwm_fan 2 3>;
+					trip = <&cpuss3_active2>;
+				};
+
+				map3 {
+					cooling-device = <&pwm_fan 3 4>;
+					trip = <&cpuss3_active3>;
+				};
+
+				map4 {
+					cooling-device = <&pwm_fan 4 5>;
+					trip = <&cpuss3_active4>;
+				};
+
+				map5 {
+					cooling-device = <&pwm_fan 5 6>;
+					trip = <&cpuss3_active5>;
+				};
+
+				map6 {
+					cooling-device = <&pwm_fan 6 7>;
+					trip = <&cpuss3_active6>;
+				};
+
+				map7 {
+					cooling-device = <&pwm_fan 7 8>;
+					trip = <&cpuss3_active7>;
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay = <200>;
+
+			trips {
+				cpuss7_active0: cpu-active0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss7_active1: cpu-active1 {
+					temperature = <55000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss7_active2: cpu-active2 {
+					temperature = <60000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss7_active3: cpu-active3 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss7_active4: cpu-active4 {
+					temperature = <70000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss7_active5: cpu-active5 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss7_active6: cpu-active6 {
+					temperature = <80000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				cpuss7_active7: cpu-active7 {
+					temperature = <85000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					cooling-device = <&pwm_fan 0 1>;
+					trip = <&cpuss7_active0>;
+				};
+
+				map1 {
+					cooling-device = <&pwm_fan 1 2>;
+					trip = <&cpuss7_active1>;
+				};
+
+				map2 {
+					cooling-device = <&pwm_fan 2 3>;
+					trip = <&cpuss7_active2>;
+				};
+
+				map3 {
+					cooling-device = <&pwm_fan 3 4>;
+					trip = <&cpuss7_active3>;
+				};
+
+				map4 {
+					cooling-device = <&pwm_fan 4 5>;
+					trip = <&cpuss7_active4>;
+				};
+
+				map5 {
+					cooling-device = <&pwm_fan 5 6>;
+					trip = <&cpuss7_active5>;
+				};
+
+				map6 {
+					cooling-device = <&pwm_fan 6 7>;
+					trip = <&cpuss7_active6>;
+				};
+
+				map7 {
+					cooling-device = <&pwm_fan 7 8>;
+					trip = <&cpuss7_active7>;
+				};
+			};
+		};
+
+		gpuss-0-thermal {
+			polling-delay = <200>;
+
+			trips {
+				gpuss0_active0: gpu-active0 {
+					temperature = <50000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				gpuss0_active1: gpu-active1 {
+					temperature = <55000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				gpuss0_active2: gpu-active2 {
+					temperature = <60000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				gpuss0_active3: gpu-active3 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				gpuss0_active4: gpu-active4 {
+					temperature = <70000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				gpuss0_active5: gpu-active5 {
+					temperature = <75000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				gpuss0_active6: gpu-active6 {
+					temperature = <80000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+
+				gpuss0_active7: gpu-active7 {
+					temperature = <85000>;
+					hysteresis = <4000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					cooling-device = <&pwm_fan 0 1>;
+					trip = <&gpuss0_active0>;
+				};
+
+				map1 {
+					cooling-device = <&pwm_fan 1 2>;
+					trip = <&gpuss0_active1>;
+				};
+
+				map2 {
+					cooling-device = <&pwm_fan 2 3>;
+					trip = <&gpuss0_active2>;
+				};
+
+				map3 {
+					cooling-device = <&pwm_fan 3 4>;
+					trip = <&gpuss0_active3>;
+				};
+
+				map4 {
+					cooling-device = <&pwm_fan 4 5>;
+					trip = <&gpuss0_active4>;
+				};
+
+				map5 {
+					cooling-device = <&pwm_fan 5 6>;
+					trip = <&gpuss0_active5>;
+				};
+
+				map6 {
+					cooling-device = <&pwm_fan 6 7>;
+					trip = <&gpuss0_active6>;
+				};
+
+				map7 {
+					cooling-device = <&pwm_fan 7 8>;
+					trip = <&gpuss0_active7>;
+				};
+			};
+		};
+	};
+
+	usb0-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 140 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 141 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb0_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+
+	vdd_fan_5v0: vdd-fan-5v0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fan_5v0";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&tlmm 109 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_mcu_3v3: vdd-mcu-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mcu_3v3";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000
+							 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>;
+		pinctrl-names = "default";
+
+		wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s5g_0p8>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_s2g_0p8>;
+		vdddig-supply = <&vreg_s4e_0p95>;
+		vddrfa1p2-supply = <&vreg_s4g_1p3>;
+		vddrfa1p8-supply = <&vreg_s6g_1p8>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+
+	/* The arch_timer label is unused here, but is required by ABL to apply a dtbo */
+	arch_timer: timer { };
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s6g_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s4g_1p3>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s4g_1p3>;
+		vdd-l12-supply = <&vreg_s6g_1p8>;
+		vdd-l15-supply = <&vreg_s6g_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s4g_1p3>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_l3c_0p9: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4g_1p3>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s4e_0p95: smps4 {
+			regulator-name = "vreg_s4e_0p95";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_1p08: smps5 {
+			regulator-name = "vreg_s5e_1p08";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p88: ldo1 {
+			regulator-name = "vreg_l1e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e_0p9: ldo2 {
+			regulator-name = "vreg_l2e_0p9";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4f_0p5: smps4 {
+			regulator-name = "vreg_s4f_0p5";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p9: ldo1 {
+			regulator-name = "vreg_l1f_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_0p88: ldo2 {
+			regulator-name = "vreg_l2f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_0p88: ldo3 {
+			regulator-name = "vreg_l3f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "g";
+
+		vdd-l1-supply = <&vreg_s4g_1p3>;
+		vdd-l2-supply = <&vreg_s4g_1p3>;
+		vdd-l3-supply = <&vreg_s4g_1p3>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vreg_s1g_1p2: smps1 {
+			regulator-name = "vreg_s1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2g_0p8: smps2 {
+			regulator-name = "vreg_s2g_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_0p7: smps3 {
+			regulator-name = "vreg_s3g_0p7";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_1p3: smps4 {
+			regulator-name = "vreg_s4g_1p3";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5g_0p8: smps5 {
+			regulator-name = "vreg_s5g_0p8";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6g_1p8: smps6 {
+			regulator-name = "vreg_s6g_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_1p2: ldo1 {
+			regulator-name = "vreg_l1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sm8550/a740_zap.mbn";
+};
+
+&i2c_master_hub_0 {
+	status = "okay";
+};
+
+&i2c_hub_2 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	spk_amp_l: amplifier@34 {
+		compatible = "awinic,aw88166";
+		reg = <0x34>;
+		#sound-dai-cells = <0>;
+		reset-gpios = <&tlmm 103 GPIO_ACTIVE_LOW>;
+		awinic,audio-channel = <0>;
+		awinic,sync-flag;
+		sound-name-prefix = "SPK_L";
+	};
+
+	spk_amp_r: amplifier@35 {
+		compatible = "awinic,aw88166";
+		reg = <0x35>;
+		#sound-dai-cells = <0>;
+		reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
+		awinic,audio-channel = <1>;
+		awinic,sync-flag;
+		sound-name-prefix = "SPK_R";
+	};
+};
+
+&iris {
+	status = "okay";
+};
+
+&lpass_tlmm {
+	lpi_i2s3_active: lpi_i2s3-active-state {
+		sck-pins {
+			pins = "gpio12";
+			function = "i2s3_clk";
+			drive-strength = <8>;
+			bias-disable;
+			output-high;
+		};
+
+		ws-pins {
+			pins = "gpio13";
+			function = "i2s3_ws";
+			drive-strength = <8>;
+			bias-disable;
+			output-high;
+		};
+
+		data0-pins {
+			pins = "gpio17";
+			function = "i2s3_data";
+			drive-strength = <8>;
+			bias-disable;
+			output-high;
+		};
+
+		data1-pins {
+			pins = "gpio18";
+			function = "i2s3_data";
+			drive-strength = <8>;
+			bias-disable;
+			output-high;
+		};
+	};
+};
+
+&lpass_vamacro {
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&lpass_wsamacro {
+	status = "disabled";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dsi1 {
+	vdda-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+
+	display_panel: panel@0 {
+		reg = <0>;
+
+		port {
+			panel1_in: endpoint {
+				remote-endpoint = <&mdss_dsi1_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi1_out {
+	remote-endpoint = <&panel1_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi1_phy {
+	vdds-supply = <&vreg_l1e_0p88>;
+
+	status = "okay";
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1e_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	fan_pwm_active: fan-pwm-active-state {
+		pins = "gpio8";
+		function = "func1";
+		input-disable;
+		output-enable;
+		output-low;
+		bias-disable;
+		power-source = <1>;
+	};
+
+	sdc2_card_det_n: sdc2-card-det-n-state {
+		pins = "gpio12";
+		function = "normal";
+		input-enable;
+		output-disable;
+		bias-pull-up;
+		power-source = <1>;
+	};
+
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pm8550_pwm {
+	status = "okay";
+
+	pm8550_multi_led: multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	qcom,tune-usb2-disc-thres = /bits/ 8 <0x6>;
+	qcom,tune-usb2-amplitude = /bits/ 8 <0xb>;
+	qcom,tune-usb2-preem = /bits/ 8 <0x3>;
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pmk8550_gpios {
+	pmk8550_sleep_clk: sleep-clk-state {
+		pins = "gpio3";
+		function = "func1";
+		input-disable;
+		output-enable;
+		bias-disable;
+		power-source = <0>;
+	};
+
+	pwm_backlight_default: pwm-backlight-default-state {
+		pins = "gpio5";
+		function = "func3";
+		input-disable;
+		output-low;
+		output-enable;
+		bias-disable;
+		power-source = <0>;
+		qcom,drive-strength = <2>;
+	};
+};
+
+&pmk8550_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+};
+
+&pmk8550_sdam_2 {
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sm8550/ayntec/cdsp.mbn",
+			"qcom/sm8550/ayntec/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+	no-sdio;
+	no-mmc;
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 8>;
+
+	mcu_en_active: mcu-en-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	fan_int: fan-int-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_s_rst_default: ts-s-rst-default-state {
+		pins = "gpio14";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	ts_s_rst_sleep: ts-s-rst-sleep-state {
+		pins = "gpio14";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	ts_s_int_default: ts-s-int-default-state {
+		pins = "gpio15";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	ts_s_int_sleep: ts-s-int-sleep-state {
+		pins = "gpio15";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	ts_p_rst_default: ts-p-rst-default-state {
+		pins = "gpio24";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	ts_p_rst_sleep: ts-p-rst-sleep-state {
+		pins = "gpio24";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	ts_p_int_default: ts-p-int-default-state {
+		pins = "gpio25";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	ts_p_int_sleep: ts-p-int-sleep-state {
+		pins = "gpio25";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio80";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+
+	bt_default: bt-default-state {
+		bt-en-pins {
+			pins = "gpio81";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sw-ctrl-pins {
+			pins = "gpio82";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	dsi_p_te_active: dsi-p-te-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	dsi_p_te_suspend: dsi-s-te-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	dsi_s_te_active: dsi-s-te-active-state {
+		pins = "gpio87";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	dsi_s_te_suspend: dsi-s-te-suspend-state {
+		pins = "gpio87";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	dsi_p_rst_active: dsi-p-rst-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	dsi_p_rst_suspend: dsi-p-rst-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	dsi_s_rst_active: dsi-s-rst-active-state {
+		pins = "gpio137";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	dsi_s_rst_suspend: dsi-s-rst-suspend-state {
+		pins = "gpio137";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	usb0_sbu_default: usb0-sbu-state {
+		oe-n-pins {
+			pins = "gpio140";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <8>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio141";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <8>;
+		};
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1g_1p2>;
+	vccq-max-microamp = <1200000>;
+	vdd-hba-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+	phys = <&pm8550b_eusb2_repeater>;
+
+	vdd-supply = <&vreg_l1e_0p88>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3f_0p88>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};

-- 
2.53.0

[PATCH v6 4/6] arm64: dts: qcom: Add AYN Odin 2 Mini

[Aaron Kling via B4 Relay]

From: Teguh Sobirin <teguh@sobir.in>

The AYN Odin 2 Mini is a high-performance Android-based handheld gaming
console powered by the Qualcomm Snapdragon 8 Gen 2 processor featuring a
5-inch mini-led touchscreen.

Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |  1 +
 .../boot/dts/qcom/qcs8550-ayntec-odin2mini.dts     | 44 ++++++++++++++++++++++
 2 files changed, 45 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4ba8e730641949..aceb84a060f80e 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -184,6 +184,7 @@ qcs8300-ride-el2-dtbs := qcs8300-ride.dtb monaco-el2.dtbo
 
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8300-ride-el2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-ayntec-odin2mini.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride-r3.dtb
 
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2mini.dts b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2mini.dts
new file mode 100644
index 00000000000000..cc894bdd0c9020
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2mini.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Teguh Sobirin.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "qcs8550-ayntec-common.dtsi"
+
+&{/} {
+	model = "AYN Odin 2 Mini";
+	compatible = "ayntec,odin2mini", "qcom,qcs8550", "qcom,sm8550";
+
+	vdd_disp_2v8: vdd-disp-2v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_disp_2v8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 142 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/* There is an hdmi bridge on i2c_hub_0@48, but it is not currently supported */
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/ayntec/odin2mini/adsp.mbn",
+			"qcom/sm8550/ayntec/odin2mini/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&spk_amp_l {
+	firmware-name = "qcom/sm8550/ayntec/odin2mini/aw883xx_acf.bin";
+};
+
+&spk_amp_r {
+	firmware-name = "qcom/sm8550/ayntec/odin2mini/aw883xx_acf.bin";
+};
+

-- 
2.53.0

[PATCH v6 5/6] arm64: dts: qcom: Add AYN Odin 2 Portal

[Aaron Kling via B4 Relay]

From: Teguh Sobirin <teguh@sobir.in>

The AYN Odin 2 Portal is a high-performance Android-based handheld gaming
console powered by the Qualcomm Snapdragon 8 Gen 2 processor featuring a
7-inch OLED touchscreen.

Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |  1 +
 .../boot/dts/qcom/qcs8550-ayntec-odin2portal.dts   | 84 ++++++++++++++++++++++
 2 files changed, 85 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index aceb84a060f80e..6bfc4554580bd5 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -185,6 +185,7 @@ qcs8300-ride-el2-dtbs := qcs8300-ride.dtb monaco-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8300-ride-el2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-ayntec-odin2mini.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-ayntec-odin2portal.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride-r3.dtb
 
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2portal.dts b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2portal.dts
new file mode 100644
index 00000000000000..bd6ba0ab941d33
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2portal.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Teguh Sobirin.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "qcs8550-ayntec-common.dtsi"
+
+&{/} {
+	model = "AYN Odin 2 Portal";
+	compatible = "ayntec,odin2portal", "qcom,qcs8550", "qcom,sm8550";
+
+	vdd_bl_5v0: vdd-bl-5v0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl_5v0";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_disp_2v8: vdd-disp-2v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_disp_2v8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 142 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@38 {
+		compatible = "focaltech,ft5426";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&vreg_l14b_3p2>;
+		iovcc-supply = <&vreg_l12b_1p8>;
+
+		pinctrl-0 = <&ts_p_rst_default &ts_p_int_default>;
+		pinctrl-1 = <&ts_p_rst_sleep &ts_p_int_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+		touchscreen-swapped-x-y;
+		touchscreen-inverted-y;
+	};
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/ayntec/odin2portal/adsp.mbn",
+			"qcom/sm8550/ayntec/odin2portal/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&spk_amp_l {
+	firmware-name = "qcom/sm8550/ayntec/odin2portal/aw883xx_acf.bin";
+};
+
+&spk_amp_r {
+	firmware-name = "qcom/sm8550/ayntec/odin2portal/aw883xx_acf.bin";
+};
+

-- 
2.53.0

[PATCH v6 6/6] arm64: dts: qcom: Add AYN Thor

[Aaron Kling via B4 Relay]

From: Teguh Sobirin <teguh@sobir.in>

The AYN Thor is a high-performance Android-based handheld gaming console
powered by the Qualcomm Snapdragon 8 Gen 2 processor featuring dual
AMOLED touchscreens.

Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile                |   1 +
 arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts | 227 +++++++++++++++++++++++
 2 files changed, 228 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6bfc4554580bd5..6feecd62e01546 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -186,6 +186,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcs8300-ride-el2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-ayntec-odin2mini.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-ayntec-odin2portal.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-ayntec-thor.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride-r3.dtb
 
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts
new file mode 100644
index 00000000000000..641146a9a7798e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-thor.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Teguh Sobirin.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "qcs8550-ayntec-common.dtsi"
+
+&{/} {
+	model = "AYN Thor";
+	compatible = "ayntec,thor", "qcom,qcs8550", "qcom,sm8550";
+
+	vdd_bl_5v0: vdd-bl-5v0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl_5v0";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_disp_1v8: vdd-disp-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_disp_1v8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_disp1_2v8: vdd-disp1-2v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_disp1_2v8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 142 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_disp2_2v8: vdd-disp2-2v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_disp2_2v8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 143 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_ts_3v0: vdd-ts-3v0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ts_3v0";
+
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+
+		gpio = <&tlmm 144 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_ts_1v8: vdd-ts-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ts_1v8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gpio_keys {
+	pinctrl-0 = <&volume_up_n &key_ayn_n>;
+
+	key-ayn {
+		label = "AYN Key";
+		debounce-interval = <15>;
+		gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
+		linux,code = <KEY_F24>;
+		linux,can-disable;
+	};
+
+	switch-lid {
+		label = "Hall Lid Sensor";
+		gpios = <&tlmm 17 GPIO_ACTIVE_LOW>;
+		linux,input-type = <EV_SW>;
+		linux,code = <SW_LID>;
+		linux,can-disable;
+		wakeup-source;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@38 {
+		compatible = "focaltech,ft5426";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&vreg_l14b_3p2>;
+		iovcc-supply = <&vreg_l12b_1p8>;
+
+		pinctrl-0 = <&ts_p_rst_default &ts_p_int_default>;
+		pinctrl-1 = <&ts_p_rst_sleep &ts_p_int_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+		touchscreen-swapped-x-y;
+		touchscreen-inverted-x;
+	};
+};
+
+&i2c_hub_3 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@38 {
+		compatible = "focaltech,ft5452";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 14 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&vdd_ts_3v0>;
+		iovcc-supply = <&vdd_ts_1v8>;
+
+		pinctrl-0 = <&ts_s_rst_default &ts_s_int_default>;
+		pinctrl-1 = <&ts_s_rst_sleep &ts_s_int_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1240>;
+		touchscreen-swapped-x-y;
+		touchscreen-inverted-x;
+	};
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	panel@0 {
+		reg = <0>;
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1e_0p88>;
+
+	status = "okay";
+};
+
+&mdss_dsi1_out {
+	qcom,te-source = "mdp_vsync_s";
+};
+
+&pm8550_multi_led {
+	status = "disabled";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/ayntec/thor/adsp.mbn",
+			"qcom/sm8550/ayntec/thor/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&spk_amp_l {
+	firmware-name = "qcom/sm8550/ayntec/thor/aw883xx_acf.bin";
+};
+
+&spk_amp_r {
+	firmware-name = "qcom/sm8550/ayntec/thor/aw883xx_acf.bin";
+};
+
+&tlmm {
+	key_ayn_n: key-ayn-n-state {
+		pins = "gpio41";
+		function = "gpio";
+		bias-pull-up;
+		output-disable;
+	};
+};

-- 
2.53.0

Re: [PATCH v6 0/6] arm64: dts: qcom: Support AYN QCS8550 Devices

[Konrad Dybcio]

On 4/30/26 6:03 PM, Aaron Kling via B4 Relay wrote:
> This specifically includes:
> * Odin 2 Mini
> * Odin 2 Portal
> * Thor
> 
> The original Odin 2 dts is not currently included as it has not yet
> been verified.
> 
> The initial port was done by Teguh Sobirin for ROCKNIX and was made
> available on the AYN github [0].
> 
> Support has been removed for things not yet supported by the upstream
> kernel, these will be added later when the related drivers are submitted
> and picked up. Such includes:
> 
> * All panels
> * The Odin 2 Mini backlight and touch
> * All rgb leds
> * The built-in uart gamepad
> 
> [0] https://github.com/AYNTechnologies/linux/commits/sm8550/v6.17.5/
> 
> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> ---
> Changes in v6:
> - Fix comment style in patch 3
> - Drop a pair of unnecessary pinmuxes in patch 3

It seems like we've had a bit of a misunderstnading.. I was referencing
the output-low property within some nodes specifically, not the whole
nodes

Konrad

Re: [PATCH v6 0/6] arm64: dts: qcom: Support AYN QCS8550 Devices

[Aaron Kling]

On Thu, Apr 30, 2026 at 11:38 AM Konrad Dybcio
<konrad.dybcio@oss.qualcomm.com> wrote:
>
> On 4/30/26 6:03 PM, Aaron Kling via B4 Relay wrote:
> > This specifically includes:
> > * Odin 2 Mini
> > * Odin 2 Portal
> > * Thor
> >
> > The original Odin 2 dts is not currently included as it has not yet
> > been verified.
> >
> > The initial port was done by Teguh Sobirin for ROCKNIX and was made
> > available on the AYN github [0].
> >
> > Support has been removed for things not yet supported by the upstream
> > kernel, these will be added later when the related drivers are submitted
> > and picked up. Such includes:
> >
> > * All panels
> > * The Odin 2 Mini backlight and touch
> > * All rgb leds
> > * The built-in uart gamepad
> >
> > [0] https://github.com/AYNTechnologies/linux/commits/sm8550/v6.17.5/
> >
> > Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> > ---
> > Changes in v6:
> > - Fix comment style in patch 3
> > - Drop a pair of unnecessary pinmuxes in patch 3
>
> It seems like we've had a bit of a misunderstnading.. I was referencing
> the output-low property within some nodes specifically, not the whole
> nodes

Oh. Yep, I misunderstood. I will add back and send another revision.

Aaron