* [PATCH v4 1/3 net-next] dt-bindings: net: add st,stlc4560/p54spi binding
2026-04-30 8:12 [PATCH v4 0/3] wireless: p54 devicetree conversion Arnd Bergmann
@ 2026-04-30 8:12 ` Arnd Bergmann
2026-04-30 9:25 ` Rob Herring (Arm)
2026-04-30 8:12 ` [PATCH v4 2/3 net-next] p54spi: convert to devicetree Arnd Bergmann
2026-04-30 8:12 ` [PATCH v4 3/3 omap] ARM: dts: omap2: add stlc4560 spi-wireless node Arnd Bergmann
2 siblings, 1 reply; 7+ messages in thread
From: Arnd Bergmann @ 2026-04-30 8:12 UTC (permalink / raw)
To: netdev
Cc: Arnd Bergmann, Aaro Koskinen, Andreas Kemnade,
Bartosz Golaszewski, Benoît Cousson, David S. Miller,
Dmitry Torokhov, Eric Dumazet, Felipe Balbi, Jakub Kicinski,
Johannes Berg, Kevin Hilman, Krzysztof Kozlowski, Linus Walleij,
Paolo Abeni, Rob Herring, Roger Quadros, Tony Lindgren,
linux-wireless, devicetree, linux-kernel, linux-arm-kernel,
linux-gpio, linux-omap, Christian Lamparter
From: Arnd Bergmann <arnd@arndb.de>
The SPI version of Prism54 was sold under a couple of different
names and supported by the Linux p54spi driver, but there was
never a DT binding for it.
Document the four known names of this device and the properties
that are sufficient for its use on the Nokia N8x0 tablet.
As I don't have this hardware or documentation for it, this is
purely based on existing usage in the driver.
Link: https://lore.kernel.org/all/e8dc9acb-6f85-e0a9-a145-d101ca6da201@gmail.com/
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v4: renamed file to st,stlc4560, matching the primary compatible string
require st,stlc4560 string
---
.../bindings/net/wireless/st,stlc4560.yaml | 61 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 62 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml
diff --git a/Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml b/Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml
new file mode 100644
index 000000000000..979c8d7d859a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/st,stlc4560.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/st,stlc45xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST/Intersil/Conexant stlc45xx/p54spi/cx3110x SPI wireless device
+
+maintainers:
+ - Christian Lamparter <chunkeey@gmail.com>
+
+description:
+ The SPI variant of the Intersil Prism54 wireless device was sold
+ under a variety of names, including Conexant CX3110x and
+ ST Microelectronics STLC5460.
+
+allOf:
+ - $ref: ieee80211.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: st,stlc4560
+ - items:
+ - enum:
+ - cnxt,3110x
+ - isil,p54spi
+ - st,stlc4550
+ - const: st,stlc4560
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ powerdown-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@0 {
+ compatible = "st,stlc4560";
+ reg = <0>;
+ spi-max-frequency = <48000000>;
+ interrupts-extended = <&gpio 23>;
+ powerdown-gpios = <&gpio 1>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 86ca9297edab..67cf5ae5b652 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20093,6 +20093,7 @@ M: Christian Lamparter <chunkeey@googlemail.com>
L: linux-wireless@vger.kernel.org
S: Maintained
W: https://wireless.wiki.kernel.org/en/users/Drivers/p54
+F: Documentation/devicetree/bindings/net/wireless/st,stlc45xx.yaml
F: drivers/net/wireless/intersil/
PACKET SOCKETS
--
2.39.5
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v4 2/3 net-next] p54spi: convert to devicetree
2026-04-30 8:12 [PATCH v4 0/3] wireless: p54 devicetree conversion Arnd Bergmann
2026-04-30 8:12 ` [PATCH v4 1/3 net-next] dt-bindings: net: add st,stlc4560/p54spi binding Arnd Bergmann
@ 2026-04-30 8:12 ` Arnd Bergmann
2026-04-30 8:12 ` [PATCH v4 3/3 omap] ARM: dts: omap2: add stlc4560 spi-wireless node Arnd Bergmann
2 siblings, 0 replies; 7+ messages in thread
From: Arnd Bergmann @ 2026-04-30 8:12 UTC (permalink / raw)
To: netdev
Cc: Arnd Bergmann, Aaro Koskinen, Andreas Kemnade,
Bartosz Golaszewski, Benoît Cousson, David S. Miller,
Dmitry Torokhov, Eric Dumazet, Felipe Balbi, Jakub Kicinski,
Johannes Berg, Kevin Hilman, Krzysztof Kozlowski, Linus Walleij,
Paolo Abeni, Rob Herring, Roger Quadros, Tony Lindgren,
linux-wireless, devicetree, linux-kernel, linux-arm-kernel,
linux-gpio, linux-omap, Christian Lamparter
From: Arnd Bergmann <arnd@arndb.de>
The Prism54 SPI driver hardcodes GPIO numbers and expects users to
pass them as module parameters, apparently a relic from its life as a
staging driver. This works because there is only one user, the Nokia
N8x0 tablet.
Convert this to the gpio descriptor interface and DT based probing
to improve this and simplify the code at the same time.
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
v4:
- make gpio line optional again
- fix EPROBE_DEFER handling
- match only st,stlc4560 compatible value, with binding change
v3:
- rebase an older patch
---
arch/arm/mach-omap2/board-n8x0.c | 18 ------
drivers/net/wireless/intersil/p54/p54spi.c | 66 ++++++++--------------
drivers/net/wireless/intersil/p54/p54spi.h | 3 +
3 files changed, 25 insertions(+), 62 deletions(-)
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 969265d5d5c6..d9acd32c5457 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -20,7 +20,6 @@
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
#include <linux/mmc/host.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mmc-omap.h>
#include <linux/mfd/menelaus.h>
@@ -106,21 +105,6 @@ static void __init n8x0_usb_init(void) {}
#endif /*CONFIG_USB_MUSB_TUSB6010 */
-
-static struct omap2_mcspi_device_config p54spi_mcspi_config = {
- .turbo_mode = 0,
-};
-
-static struct spi_board_info n800_spi_board_info[] __initdata = {
- {
- .modalias = "p54spi",
- .bus_num = 2,
- .chip_select = 0,
- .max_speed_hz = 48000000,
- .controller_data = &p54spi_mcspi_config,
- },
-};
-
#if defined(CONFIG_MENELAUS) && IS_ENABLED(CONFIG_MMC_OMAP)
/*
@@ -524,7 +508,5 @@ omap_late_initcall(n8x0_late_initcall);
void * __init n8x0_legacy_init(void)
{
board_check_revision();
- spi_register_board_info(n800_spi_board_info,
- ARRAY_SIZE(n800_spi_board_info));
return &mmc1_data;
}
diff --git a/drivers/net/wireless/intersil/p54/p54spi.c b/drivers/net/wireless/intersil/p54/p54spi.c
index 9d66dcae54e0..806761580759 100644
--- a/drivers/net/wireless/intersil/p54/p54spi.c
+++ b/drivers/net/wireless/intersil/p54/p54spi.c
@@ -8,6 +8,7 @@
*/
#include <linux/module.h>
+#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/firmware.h>
@@ -15,7 +16,7 @@
#include <linux/irq.h>
#include <linux/spi/spi.h>
#include <linux/etherdevice.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include "p54spi.h"
@@ -30,19 +31,6 @@
MODULE_FIRMWARE("3826.arm");
MODULE_FIRMWARE("3826.eeprom");
-/* gpios should be handled in board files and provided via platform data,
- * but because it's currently impossible for p54spi to have a header file
- * in include/linux, let's use module parameters for now
- */
-
-static int p54spi_gpio_power = 97;
-module_param(p54spi_gpio_power, int, 0444);
-MODULE_PARM_DESC(p54spi_gpio_power, "gpio number for power line");
-
-static int p54spi_gpio_irq = 87;
-module_param(p54spi_gpio_irq, int, 0444);
-MODULE_PARM_DESC(p54spi_gpio_irq, "gpio number for irq line");
-
static void p54spi_spi_read(struct p54s_priv *priv, u8 address,
void *buf, size_t len)
{
@@ -262,14 +250,14 @@ static int p54spi_upload_firmware(struct ieee80211_hw *dev)
static void p54spi_power_off(struct p54s_priv *priv)
{
- disable_irq(gpio_to_irq(p54spi_gpio_irq));
- gpio_set_value(p54spi_gpio_power, 0);
+ disable_irq(priv->irq);
+ gpiod_set_value(priv->gpio_powerdown, 1);
}
static void p54spi_power_on(struct p54s_priv *priv)
{
- gpio_set_value(p54spi_gpio_power, 1);
- enable_irq(gpio_to_irq(p54spi_gpio_irq));
+ gpiod_set_value(priv->gpio_powerdown, 0);
+ enable_irq(priv->irq);
/* need to wait a while before device can be accessed, the length
* is just a guess
@@ -608,31 +596,19 @@ static int p54spi_probe(struct spi_device *spi)
goto err_free;
}
- ret = gpio_request(p54spi_gpio_power, "p54spi power");
- if (ret < 0) {
- dev_err(&priv->spi->dev, "power GPIO request failed: %d", ret);
+ priv->gpio_powerdown = gpiod_get_optional(&spi->dev, "powerdown", GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->gpio_powerdown)) {
+ ret = dev_err_probe(&priv->spi->dev, PTR_ERR(priv->gpio_powerdown),
+ "powerdown GPIO request failed\n");
goto err_free;
}
- ret = gpio_request(p54spi_gpio_irq, "p54spi irq");
- if (ret < 0) {
- dev_err(&priv->spi->dev, "irq GPIO request failed: %d", ret);
- goto err_free_gpio_power;
- }
-
- gpio_direction_output(p54spi_gpio_power, 0);
- gpio_direction_input(p54spi_gpio_irq);
-
- ret = request_irq(gpio_to_irq(p54spi_gpio_irq),
- p54spi_interrupt, IRQF_NO_AUTOEN, "p54spi",
- priv->spi);
+ ret = request_irq(spi->irq, p54spi_interrupt, IRQF_NO_AUTOEN, "p54spi", priv->spi);
if (ret < 0) {
dev_err(&priv->spi->dev, "request_irq() failed");
- goto err_free_gpio_irq;
+ goto err_free_gpio_power;
}
- irq_set_irq_type(gpio_to_irq(p54spi_gpio_irq), IRQ_TYPE_EDGE_RISING);
-
INIT_WORK(&priv->work, p54spi_work);
init_completion(&priv->fw_comp);
INIT_LIST_HEAD(&priv->tx_pending);
@@ -659,11 +635,9 @@ static int p54spi_probe(struct spi_device *spi)
err_free_common:
release_firmware(priv->firmware);
- free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
-err_free_gpio_irq:
- gpio_free(p54spi_gpio_irq);
+ free_irq(priv->irq, spi);
err_free_gpio_power:
- gpio_free(p54spi_gpio_power);
+ gpiod_put(priv->gpio_powerdown);
err_free:
p54_free_common(priv->hw);
return ret;
@@ -675,10 +649,8 @@ static void p54spi_remove(struct spi_device *spi)
p54_unregister_common(priv->hw);
- free_irq(gpio_to_irq(p54spi_gpio_irq), spi);
-
- gpio_free(p54spi_gpio_power);
- gpio_free(p54spi_gpio_irq);
+ free_irq(priv->irq, spi);
+ gpiod_put(priv->gpio_powerdown);
release_firmware(priv->firmware);
mutex_destroy(&priv->mutex);
@@ -686,10 +658,16 @@ static void p54spi_remove(struct spi_device *spi)
p54_free_common(priv->hw);
}
+static const struct of_device_id p54spi_of_ids[] = {
+ { .compatible = "st,stlc4560", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, p54spi_of_ids);
static struct spi_driver p54spi_driver = {
.driver = {
.name = "p54spi",
+ .of_match_table = p54spi_of_ids,
},
.probe = p54spi_probe,
diff --git a/drivers/net/wireless/intersil/p54/p54spi.h b/drivers/net/wireless/intersil/p54/p54spi.h
index e5619a13fd61..118785cc635a 100644
--- a/drivers/net/wireless/intersil/p54/p54spi.h
+++ b/drivers/net/wireless/intersil/p54/p54spi.h
@@ -107,6 +107,9 @@ struct p54s_priv {
enum fw_state fw_state;
const struct firmware *firmware;
+
+ struct gpio_desc *gpio_powerdown;
+ int irq;
};
#endif /* P54SPI_H */
--
2.39.5
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v4 3/3 omap] ARM: dts: omap2: add stlc4560 spi-wireless node
2026-04-30 8:12 [PATCH v4 0/3] wireless: p54 devicetree conversion Arnd Bergmann
2026-04-30 8:12 ` [PATCH v4 1/3 net-next] dt-bindings: net: add st,stlc4560/p54spi binding Arnd Bergmann
2026-04-30 8:12 ` [PATCH v4 2/3 net-next] p54spi: convert to devicetree Arnd Bergmann
@ 2026-04-30 8:12 ` Arnd Bergmann
2026-04-30 14:19 ` Bartosz Golaszewski
2 siblings, 1 reply; 7+ messages in thread
From: Arnd Bergmann @ 2026-04-30 8:12 UTC (permalink / raw)
To: netdev
Cc: Arnd Bergmann, Aaro Koskinen, Andreas Kemnade,
Bartosz Golaszewski, Benoît Cousson, David S. Miller,
Dmitry Torokhov, Eric Dumazet, Felipe Balbi, Jakub Kicinski,
Johannes Berg, Kevin Hilman, Krzysztof Kozlowski, Linus Walleij,
Paolo Abeni, Rob Herring, Roger Quadros, Tony Lindgren,
linux-wireless, devicetree, linux-kernel, linux-arm-kernel,
linux-gpio, linux-omap, Krzysztof Kozlowski
From: Arnd Bergmann <arnd@arndb.de>
Converted from the platform_device creation in board-n8x0.c.
Link: https://lore.kernel.org/all/20230314163201.955689-1-arnd@kernel.org/
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/boot/dts/ti/omap/omap2.dtsi | 4 ++++
arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi | 12 ++++++++++++
2 files changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/ti/omap/omap2.dtsi b/arch/arm/boot/dts/ti/omap/omap2.dtsi
index afabb36a8ac1..fdc1790adf43 100644
--- a/arch/arm/boot/dts/ti/omap/omap2.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap2.dtsi
@@ -129,6 +129,8 @@ i2c2: i2c@48072000 {
};
mcspi1: spi@48098000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi1";
reg = <0x48098000 0x100>;
@@ -140,6 +142,8 @@ mcspi1: spi@48098000 {
};
mcspi2: spi@4809a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi2";
reg = <0x4809a000 0x100>;
diff --git a/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
index 63b0b4921e4e..fe9dd8bbfc85 100644
--- a/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap2420-n8x0-common.dtsi
@@ -109,3 +109,15 @@ partition@5 {
};
};
};
+
+&mcspi2 {
+ status = "okay";
+
+ wifi@0 {
+ reg = <0>;
+ compatible = "st,stlc4560";
+ spi-max-frequency = <48000000>;
+ interrupts-extended = <&gpio3 23 IRQ_TYPE_EDGE_RISING>;
+ powerdown-gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* gpio 97 */
+ };
+};
--
2.39.5
^ permalink raw reply related [flat|nested] 7+ messages in thread