From: Chris Morgan <macroalpha82@gmail.com>
To: linux-iio@vger.kernel.org
Cc: andy@kernel.org, nuno.sa@analog.com, dlechner@baylibre.com,
jic23@kernel.org, jean-baptiste.maneyrol@tdk.com,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
robh@kernel.org, andriy.shevchenko@intel.com,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V4 06/10] iio: imu: inv_icm42607: Add Temp Support in icm42607
Date: Fri, 1 May 2026 17:11:45 -0500 [thread overview]
Message-ID: <20260501221152.194251-7-macroalpha82@gmail.com> (raw)
In-Reply-To: <20260501221152.194251-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
Add functions for reading temperature sensor data.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
drivers/iio/imu/inv_icm42607/Makefile | 1 +
drivers/iio/imu/inv_icm42607/inv_icm42607.h | 3 +
.../iio/imu/inv_icm42607/inv_icm42607_core.c | 17 ++++
.../iio/imu/inv_icm42607/inv_icm42607_temp.c | 81 +++++++++++++++++++
.../iio/imu/inv_icm42607/inv_icm42607_temp.h | 30 +++++++
5 files changed, 132 insertions(+)
create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c
create mode 100644 drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h
diff --git a/drivers/iio/imu/inv_icm42607/Makefile b/drivers/iio/imu/inv_icm42607/Makefile
index 3c9d08509793..ccb8e007cdeb 100644
--- a/drivers/iio/imu/inv_icm42607/Makefile
+++ b/drivers/iio/imu/inv_icm42607/Makefile
@@ -3,6 +3,7 @@
obj-$(CONFIG_INV_ICM42607) += inv-icm42607.o
inv-icm42607-y += inv_icm42607_core.o
inv-icm42607-y += inv_icm42607_buffer.o
+inv-icm42607-y += inv_icm42607_temp.o
obj-$(CONFIG_INV_ICM42607_I2C) += inv-icm42607-i2c.o
inv-icm42607-i2c-y += inv_icm42607_i2c.o
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607.h b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
index fd860685d0ad..05b5a246e384 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607.h
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607.h
@@ -399,6 +399,9 @@ extern const struct dev_pm_ops inv_icm42607_pm_ops;
u32 inv_icm42607_odr_to_period(enum inv_icm42607_odr odr);
+int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
+ unsigned int *sleep_ms);
+
int inv_icm42607_debugfs_reg(struct iio_dev *indio_dev, unsigned int reg,
unsigned int writeval, unsigned int *readval);
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
index 7b9c05df820a..77b9a633d31a 100644
--- a/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_core.c
@@ -164,6 +164,23 @@ static int inv_icm42607_set_pwr_mgmt0(struct inv_icm42607_state *st,
return 0;
}
+int inv_icm42607_set_temp_conf(struct inv_icm42607_state *st, bool enable,
+ unsigned int *sleep_ms)
+{
+ unsigned int val;
+ int ret;
+
+ val = FIELD_PREP(INV_ICM42607_TEMP_CONFIG0_FILTER_MASK,
+ INV_ICM42607_FILTER_BW_34HZ);
+ ret = regmap_update_bits(st->map, INV_ICM42607_REG_TEMP_CONFIG0,
+ INV_ICM42607_TEMP_CONFIG0_FILTER_MASK, val);
+ if (ret)
+ return ret;
+
+ return inv_icm42607_set_pwr_mgmt0(st, st->conf.gyro.mode,
+ st->conf.accel.mode, enable,
+ sleep_ms);
+}
int inv_icm42607_debugfs_reg(struct iio_dev *indio_dev, unsigned int reg,
unsigned int writeval, unsigned int *readval)
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c
new file mode 100644
index 000000000000..bcc11620c74c
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+
+#include "inv_icm42607.h"
+#include "inv_icm42607_temp.h"
+
+static int inv_icm42607_temp_read(struct inv_icm42607_state *st, s16 *temp)
+{
+ struct device *dev = regmap_get_device(st->map);
+ __be16 *raw;
+ int ret;
+
+ PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dev, pm);
+ if (PM_RUNTIME_ACQUIRE_ERR(&pm))
+ return -ENXIO;
+
+ guard(mutex)(&st->lock);
+
+ ret = inv_icm42607_set_temp_conf(st, true, NULL);
+ if (ret)
+ return ret;
+
+ raw = &st->buffer[0];
+ ret = regmap_bulk_read(st->map, INV_ICM42607_REG_TEMP_DATA1, raw, sizeof(*raw));
+ if (ret)
+ return ret;
+
+ *temp = be16_to_cpup(raw);
+ if (*temp == INV_ICM42607_DATA_INVALID)
+ ret = -EINVAL;
+
+ return ret;
+}
+
+int inv_icm42607_temp_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct inv_icm42607_state *st = iio_device_get_drvdata(indio_dev);
+ s16 temp;
+ int ret;
+
+ if (chan->type != IIO_TEMP)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (!iio_device_claim_direct(indio_dev))
+ return -EBUSY;
+ ret = inv_icm42607_temp_read(st, &temp);
+ iio_device_release_direct(indio_dev);
+ if (ret)
+ return ret;
+ *val = temp;
+ return IIO_VAL_INT;
+ /*
+ * T°C = (temp / 128) + 25
+ * Tm°C = 1000 * ((temp * 100 / 12800) + 25)
+ * scale: 100000 / 12800 ~= 7.8125
+ * offset: 25000
+ */
+ case IIO_CHAN_INFO_SCALE:
+ *val = 7;
+ *val2 = 812500;
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_OFFSET:
+ *val = 25000;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+}
diff --git a/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h
new file mode 100644
index 000000000000..d0bd6c460ff2
--- /dev/null
+++ b/drivers/iio/imu/inv_icm42607/inv_icm42607_temp.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2026 InvenSense, Inc.
+ */
+
+#ifndef INV_ICM42607_TEMP_H_
+#define INV_ICM42607_TEMP_H_
+
+#include <linux/iio/iio.h>
+
+#define INV_ICM42607_TEMP_CHAN(_index) \
+{ \
+ .type = IIO_TEMP, \
+ .info_mask_separate = \
+ BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_OFFSET) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ }, \
+}
+
+int inv_icm42607_temp_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask);
+
+#endif
--
2.43.0
next prev parent reply other threads:[~2026-05-01 22:14 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-01 22:11 [PATCH V4 00/10] Add Invensense ICM42607 Chris Morgan
2026-05-01 22:11 ` [PATCH V4 01/10] dt-bindings: iio: imu: icm42600: Add icm42607 binding Chris Morgan
2026-05-01 22:11 ` [PATCH V4 02/10] iio: imu: inv_icm42607: Add inv_icm42607 Core Driver Chris Morgan
2026-05-01 22:11 ` [PATCH V4 03/10] iio: imu: inv_icm42607: Add I2C and SPI For icm42607 Chris Morgan
2026-05-01 22:11 ` [PATCH V4 04/10] iio: imu: inv_icm42607: Add PM support for icm42607 Chris Morgan
2026-05-01 22:11 ` [PATCH V4 05/10] iio: imu: inv_icm42607: Add Buffer " Chris Morgan
2026-05-01 22:11 ` Chris Morgan [this message]
2026-05-01 22:11 ` [PATCH V4 07/10] iio: imu: inv_icm42607: Add Accelerometer " Chris Morgan
2026-05-01 22:11 ` [PATCH V4 08/10] iio: imu: inv_icm42607: Add Wake on Movement " Chris Morgan
2026-05-01 22:11 ` [PATCH V4 09/10] iio: imu: inv_icm42607: Add Gyroscope to icm42607 Chris Morgan
2026-05-01 22:11 ` [PATCH V4 10/10] arm64: dts: rockchip: Add icm42607p IMU for RG-DS Chris Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260501221152.194251-7-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=andriy.shevchenko@intel.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=heiko@sntech.de \
--cc=jean-baptiste.maneyrol@tdk.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=macromorgan@hotmail.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox