[PATCH] dt-bindings: rtc: epson,rx6110: Convert to DT Schema

[PATCH] dt-bindings: rtc: epson,rx6110: Convert to DT Schema

[Udaya Kiran Challa]

Convert the Epson RX6110 Real Time Clock devicetree binding
from the legacy text format to DT schema.

Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
---
 .../devicetree/bindings/rtc/epson,rx6110.txt  | 39 -----------
 .../devicetree/bindings/rtc/epson,rx6110.yaml | 69 +++++++++++++++++++
 2 files changed, 69 insertions(+), 39 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/rtc/epson,rx6110.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/epson,rx6110.yaml

diff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt
deleted file mode 100644
index 3dc313e01f77..000000000000
--- a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Epson RX6110 Real Time Clock
-============================
-
-The Epson RX6110 can be used with SPI or I2C busses. The kind of
-bus depends on the SPISEL pin and can not be configured via software.
-
-I2C mode
---------
-
-Required properties:
-  - compatible: should be: "epson,rx6110"
-  - reg : the I2C address of the device for I2C
-
-Example:
-
-	rtc: rtc@32 {
-		compatible = "epson,rx6110"
-		reg = <0x32>;
-	};
-
-SPI mode
---------
-
-Required properties:
-  - compatible: should be: "epson,rx6110"
-  - reg: chip select number
-  - spi-cs-high: RX6110 needs chipselect high
-  - spi-cpha: RX6110 works with SPI shifted clock phase
-  - spi-cpol: RX6110 works with SPI inverse clock polarity
-
-Example:
-
-	rtc: rtc@3 {
-		compatible = "epson,rx6110"
-		reg = <3>
-		spi-cs-high;
-		spi-cpha;
-		spi-cpol;
-	};
diff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.yaml b/Documentation/devicetree/bindings/rtc/epson,rx6110.yaml
new file mode 100644
index 000000000000..32d15a014f91
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/epson,rx6110.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/epson,rx6110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Epson RX6110 Real Time Clock
+
+description: |
+  The Epson RX6110 can be used with SPI or I2C busses.
+  The kind of bus depends on the SPISEL pin and can not be
+  configured via software.
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    const: epson,rx6110
+
+  reg:
+    maxItems: 1
+
+  # SPI-specific properties
+  spi-cs-high:
+    type: boolean
+    description: RX6110 needs chipselect high
+
+  spi-cpha:
+    type: boolean
+    description: RX6110 works with SPI shifted clock phase
+
+  spi-cpol:
+    type: boolean
+    description: RX6110 works with SPI inverse clock polarity
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # I2C mode
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtc1: rtc@32 {
+        compatible = "epson,rx6110";
+        reg = <0x32>;
+      };
+    };
+
+  # SPI mode
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      rtc2: rtc@3 {
+        compatible = "epson,rx6110";
+        reg = <3>;
+        spi-cs-high;
+        spi-cpha;
+        spi-cpol;
+      };
+    };
-- 
2.43.0

Re: [PATCH] dt-bindings: rtc: epson,rx6110: Convert to DT Schema

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 4079 bytes --]

On Tue, May 05, 2026 at 12:07:28AM +0530, Udaya Kiran Challa wrote:
> Convert the Epson RX6110 Real Time Clock devicetree binding
> from the legacy text format to DT schema.
> 
> Signed-off-by: Udaya Kiran Challa <challauday369@gmail.com>
> ---
>  .../devicetree/bindings/rtc/epson,rx6110.txt  | 39 -----------
>  .../devicetree/bindings/rtc/epson,rx6110.yaml | 69 +++++++++++++++++++
>  2 files changed, 69 insertions(+), 39 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/rtc/epson,rx6110.txt
>  create mode 100644 Documentation/devicetree/bindings/rtc/epson,rx6110.yaml
> 
> diff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt
> deleted file mode 100644
> index 3dc313e01f77..000000000000
> --- a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -Epson RX6110 Real Time Clock
> -============================
> -
> -The Epson RX6110 can be used with SPI or I2C busses. The kind of
> -bus depends on the SPISEL pin and can not be configured via software.
> -
> -I2C mode
> ---------
> -
> -Required properties:
> -  - compatible: should be: "epson,rx6110"
> -  - reg : the I2C address of the device for I2C
> -
> -Example:
> -
> -	rtc: rtc@32 {
> -		compatible = "epson,rx6110"
> -		reg = <0x32>;
> -	};
> -
> -SPI mode
> ---------
> -
> -Required properties:
> -  - compatible: should be: "epson,rx6110"
> -  - reg: chip select number
> -  - spi-cs-high: RX6110 needs chipselect high
> -  - spi-cpha: RX6110 works with SPI shifted clock phase
> -  - spi-cpol: RX6110 works with SPI inverse clock polarity
> -
> -Example:
> -
> -	rtc: rtc@3 {
> -		compatible = "epson,rx6110"
> -		reg = <3>
> -		spi-cs-high;
> -		spi-cpha;
> -		spi-cpol;
> -	};
> diff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.yaml b/Documentation/devicetree/bindings/rtc/epson,rx6110.yaml
> new file mode 100644
> index 000000000000..32d15a014f91
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/epson,rx6110.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/epson,rx6110.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Epson RX6110 Real Time Clock
> +
> +description: |
> +  The Epson RX6110 can be used with SPI or I2C busses.
> +  The kind of bus depends on the SPISEL pin and can not be
> +  configured via software.
> +
> +maintainers:
> +  - Alexandre Belloni <alexandre.belloni@bootlin.com>
> +
> +properties:
> +  compatible:
> +    const: epson,rx6110
> +
> +  reg:
> +    maxItems: 1
> +
> +  # SPI-specific properties

Drop the obvious comment.

> +  spi-cs-high:
> +    type: boolean
> +    description: RX6110 needs chipselect high
> +
> +  spi-cpha:
> +    type: boolean
> +    description: RX6110 works with SPI shifted clock phase
> +
> +  spi-cpol:
> +    type: boolean
> +    description: RX6110 works with SPI inverse clock polarity

These spi properties should be replaced by a ref to /schemas/spi/spi-peripheral-props.yaml
and become "spi-foo: true", unless you want to reword these descriptions
to make it clear that these are all mandatory.

pw-bot: changes-requested

Cheers,
Conor.

> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  # I2C mode
> +  - |
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      rtc1: rtc@32 {

Drop the labels here, since they have no users.

> +        compatible = "epson,rx6110";
> +        reg = <0x32>;
> +      };
> +    };
> +
> +  # SPI mode
> +  - |
> +    spi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      rtc2: rtc@3 {
> +        compatible = "epson,rx6110";
> +        reg = <3>;
> +        spi-cs-high;
> +        spi-cpha;
> +        spi-cpol;
> +      };
> +    };
> -- 
> 2.43.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]