[PATCH 0/3] iio: dac: Add support for AD5529R DAC

[PATCH 0/3] iio: dac: Add support for AD5529R DAC

[Janani Sunil]

This patch series adds support for Analog Devices AD5529R, a 16 channel
16 and 12 bit voltage Digital-to-Analog Converter (DAC) with integrated
precision reference. The AD5529R operates from both unipolar and
bipolar supplies. The device communicates via SPI interface.

**Device Overview:**
The AD5529R features 16 independent DAC channels, with 16 or 12 bit
resolution, allowing independently programmable output ranges. The
internal 4.096V precision reference sets the accuracy of the output
voltage.

**Features Implemented:**
- Automatic detection of 12/16 bit generic with product ID read.
- Reset support via GPIO.
- Dual regmap configuration to handle 8 and 16 bit registers.

**Patch Summary:**
1. **dt-bindings**: Binding documentation with channel configuration.
2. **driver**: Implement IIO DAC Driver with regmap support.
3. **documentation**: Add driver documentation with usage examples.

**Testing:**
The driver was compiled and tested on the EVAL-AD5529R-ARDZ using a
coraZ7 with a mainline v7.0 kernel.

Signed-off-by: Janani Sunil <janani.sunil@analog.com>
---
Janani Sunil (3):
      dt-bindings: iio: dac: Add AD5529R
      iio: dac: Add AD5529R DAC driver support
      Documentation: iio: Add AD5529R Documentation

 .../devicetree/bindings/iio/dac/adi,ad5529r.yaml   |  99 ++++
 Documentation/iio/ad5529r.rst                      | 214 ++++++++
 Documentation/iio/index.rst                        |   1 +
 MAINTAINERS                                        |   9 +
 drivers/iio/dac/Kconfig                            |  17 +
 drivers/iio/dac/Makefile                           |   1 +
 drivers/iio/dac/ad5529r.c                          | 564 +++++++++++++++++++++
 7 files changed, 905 insertions(+)
---
base-commit: 93df88612859e8e19dec93c69d563b4b73e9bd4b
change-id: 20260507-ad5529r-driver-866bbdd864de

Best regards,
-- 
Janani Sunil <janani.sunil@analog.com>

[PATCH 1/3] dt-bindings: iio: dac: Add AD5529R

[Janani Sunil]

Devicetree bindings for AD5529R 16 channel 12/16 bit high voltage,
buffered voltage output digital-to-analog converter (DAC) with an
integrated precision reference.

Signed-off-by: Janani Sunil <janani.sunil@analog.com>
---
 .../devicetree/bindings/iio/dac/adi,ad5529r.yaml   | 99 ++++++++++++++++++++++
 MAINTAINERS                                        |  7 ++
 2 files changed, 106 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5529r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5529r.yaml
new file mode 100644
index 000000000000..ba559dde75fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5529r.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5529r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5529R 16-Channel 12/16-bit High Voltage DAC
+
+maintainers:
+  - Janani Sunil <janani.sunil@analog.com>
+
+description: |
+  The AD5529R is a 16-channel, 12-bit or 16-bit, high voltage, buffered voltage output
+  digital-to-analog converter (DAC) with an integrated precision reference.
+  The device operates from unipolar and bipolar supplies. It is guaranteed
+  monotonic and has built-in rail-to-rail output buffers that can source or
+  sink up to 25mA.
+
+  Specifications:
+  * 16 independent 12-bit or 16-bit DAC channels
+  * Independently programmable output ranges: 0V to 5V, 0V to 10V, 0V to 20V,
+    0V to 40V, ±5V to ±15V, ±10V to ±20V
+  * 4.096V precision reference, 12ppm/°C maximum
+  * Built-in function generation: Toggle, Sinusoidal Dither, and Ramp waveforms
+  * Multiplexer for output voltage, load current sense and die temperature
+
+  Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad5529r.pdf
+
+properties:
+  compatible:
+    const: adi,ad5529r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 50000000
+
+  spi-cpha:
+    description:
+      SPI clock phase (Optional). The AD5529R supports SPI mode 0 and mode 3.
+
+  spi-cpol:
+    description:
+      SPI clock polarity (Optional). The AD5529R supports SPI mode 0 and mode 3.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the RESET pin. Active low. When asserted low,
+      performs a power-on reset and initializes the device to its default state.
+
+  vdd-supply:
+    description: Digital power supply (typically 3.3V)
+
+  avdd-supply:
+    description: Analog power supply (typically 5V)
+
+  hvdd-supply:
+    description: High voltage positive supply (up to 40V for output range)
+
+  hvss-supply:
+    description: High voltage negative supply (ground or negative voltage)
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - avdd-supply
+  - hvdd-supply
+  - hvss-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5529r";
+            reg = <0>;
+            spi-max-frequency = <25000000>;
+
+            vdd-supply = <&vdd_regulator>;
+            avdd-supply = <&avdd_regulator>;
+            hvdd-supply = <&hvdd_regulator>;
+            hvss-supply = <&hvss_regulator>;
+
+            reset-gpios = <&gpio0 87 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index d6c3c7d22403..320e84765ce6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1507,6 +1507,13 @@ W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml
 F:	drivers/iio/adc/ad4851.c
 
+ANALOG DEVICES INC AD5529R DRIVER
+M:	Janani Sunil <janani.sunil@analog.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+W:	https://ez.analog.com/linux-software-drivers
+F:	Documentation/devicetree/bindings/iio/dac/adi,ad5529r.yaml
+
 ANALOG DEVICES INC AD5706R DRIVER
 M:	Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
 L:	linux-iio@vger.kernel.org

-- 
2.43.0

[PATCH 2/3] iio: dac: Add AD5529R DAC driver support

[Janani Sunil]

Add support for AD5529R 16-channel, 12/16 bit Digital to Analog Converter

Signed-off-by: Janani Sunil <janani.sunil@analog.com>
---
 MAINTAINERS               |   1 +
 drivers/iio/dac/Kconfig   |  17 ++
 drivers/iio/dac/Makefile  |   1 +
 drivers/iio/dac/ad5529r.c | 564 ++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 583 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 320e84765ce6..143714e27d51 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1513,6 +1513,7 @@ L:	linux-iio@vger.kernel.org
 S:	Supported
 W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/devicetree/bindings/iio/dac/adi,ad5529r.yaml
+F:	drivers/iio/dac/ad5529r.c
 
 ANALOG DEVICES INC AD5706R DRIVER
 M:	Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index 657c68e75542..bb1d59889a2a 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -134,6 +134,23 @@ config AD5449
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad5449.
 
+config AD5529R
+	tristate "Analog Devices AD5529R High Voltage DAC driver"
+	depends on SPI_MASTER
+	select REGMAP_SPI
+	help
+	  Say yes here to build support for Analog Devices AD5529R
+	  16-Channel, 12-Bit/16-Bit, 40V High Voltage Precision Digital to Analog
+	  Converter.
+
+	  The device features multiple output voltage ranges from -20V to +20V,
+	  built-in 4.096V voltage reference, and digital functions including
+	  toggle, dither, and ramp modes. Supports both 12-bit and 16-bit
+	  resolution variants.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad5529r.
+
 config AD5592R_BASE
 	tristate
 
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index 003431798498..f35e060b3643 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_AD5446) += ad5446.o
 obj-$(CONFIG_AD5446_SPI) += ad5446-spi.o
 obj-$(CONFIG_AD5446_I2C) += ad5446-i2c.o
 obj-$(CONFIG_AD5449) += ad5449.o
+obj-$(CONFIG_AD5529R) += ad5529r.o
 obj-$(CONFIG_AD5592R_BASE) += ad5592r-base.o
 obj-$(CONFIG_AD5592R) += ad5592r.o
 obj-$(CONFIG_AD5593R) += ad5593r.o
diff --git a/drivers/iio/dac/ad5529r.c b/drivers/iio/dac/ad5529r.c
new file mode 100644
index 000000000000..b42e12da4de3
--- /dev/null
+++ b/drivers/iio/dac/ad5529r.c
@@ -0,0 +1,564 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AD5529R Digital-to-Analog Converter Driver
+ * 16-Channel, 12/16-Bit, 40V High Voltage Precision DAC
+ *
+ * Copyright 2026 Analog Devices Inc.
+ * Author: Janani Sunil <janani.sunil@analog.com>
+ */
+
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/spi/spi.h>
+#include <linux/errno.h>
+#include <linux/iio/iio.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/delay.h>
+#include <linux/regulator/consumer.h>
+
+/* Register Map */
+#define AD5529R_REG_INTERFACE_CONFIG_A		0x00
+#define AD5529R_REG_INTERFACE_CONFIG_B		0x01
+#define AD5529R_REG_DEVICE_CONFIG		0x02
+#define AD5529R_REG_CHIP_TYPE			0x03
+#define AD5529R_REG_PRODUCT_ID_L		0x04
+#define AD5529R_REG_PRODUCT_ID_H		0x05
+#define AD5529R_REG_CHIP_GRADE			0x06
+#define AD5529R_REG_SCRATCH_PAD			0x0A
+#define AD5529R_REG_SPI_REVISION		0x0B
+#define AD5529R_REG_VENDOR_L			0x0C
+#define AD5529R_REG_VENDOR_H			0x0D
+#define AD5529R_REG_STREAM_MODE			0x0E
+#define AD5529R_REG_TRANSFER_CONFIG		0x0F
+#define AD5529R_REG_INTERFACE_CONFIG_C		0x10
+#define AD5529R_REG_INTERFACE_STATUS_A		0x11
+
+/* Configuration registers */
+#define AD5529R_REG_MULTI_DAC_CH_SEL		(0x14 + 1)
+#define AD5529R_REG_LDAC_SYNC_ASYNC		(0x16 + 1)
+#define AD5529R_REG_LDAC_HW_SW			(0x18 + 1)
+
+/* Hardware LDAC source and edge select registers (per channel, 16-bit) */
+#define AD5529R_REG_LDAC_HW_SRC_EDGE_SEL_BASE	(0x1A + 1)
+#define AD5529R_REG_LDAC_HW_SRC_EDGE_SEL(ch)	\
+	(AD5529R_REG_LDAC_HW_SRC_EDGE_SEL_BASE + (ch) * 2)
+
+/* Output configuration */
+#define AD5529R_REG_OUT_OPERATING_MODE		(0x3A + 1)
+#define AD5529R_REG_OUT_RANGE_BASE		(0x3C + 1)
+#define AD5529R_REG_OUT_RANGE(ch)		(AD5529R_REG_OUT_RANGE_BASE + (ch) * 2)
+
+/* Calibration registers */
+#define AD5529R_REG_CAL_GAIN_BASE		(0x5C + 1)
+#define AD5529R_REG_CAL_GAIN(ch)		(AD5529R_REG_CAL_GAIN_BASE + (ch) * 2)
+
+#define AD5529R_REG_CAL_OFFSET_BASE		(0x7C + 1)
+#define AD5529R_REG_CAL_OFFSET(ch)		(AD5529R_REG_CAL_OFFSET_BASE + (ch) * 2)
+
+/* Function generator registers */
+#define AD5529R_REG_FUNC_EN			(0x9C + 1)
+#define AD5529R_REG_FUNC_MODE_SEL_BASE		(0x9E + 1)
+#define AD5529R_REG_FUNC_MODE_SEL(ch)		\
+	(AD5529R_REG_FUNC_MODE_SEL_BASE + (ch) * 2)
+
+#define AD5529R_REG_FUNC_DAC_INPUT_B_BASE	(0xBE + 1)
+#define AD5529R_REG_FUNC_DAC_INPUT_B(ch)	\
+	(AD5529R_REG_FUNC_DAC_INPUT_B_BASE + (ch) * 2)
+
+#define AD5529R_REG_FUNC_DITHER_PERIOD_BASE	(0xDE + 1)
+#define AD5529R_REG_FUNC_DITHER_PERIOD(ch)	\
+	(AD5529R_REG_FUNC_DITHER_PERIOD_BASE + (ch) * 2)
+
+#define AD5529R_REG_FUNC_DITHER_PHASE_BASE	(0xFE + 1)
+#define AD5529R_REG_FUNC_DITHER_PHASE(ch)	\
+	(AD5529R_REG_FUNC_DITHER_PHASE_BASE + (ch) * 2)
+
+#define AD5529R_REG_FUNC_RAMP_STEP_BASE		(0x11E + 1)
+#define AD5529R_REG_FUNC_RAMP_STEP(ch)		\
+	(AD5529R_REG_FUNC_RAMP_STEP_BASE + (ch) * 2)
+
+#define AD5529R_REG_FUNC_INT_EN			(0x13E + 1)
+
+/* Multiplexer and main DAC registers */
+#define AD5529R_REG_MUX_OUT_SEL			(0x140 + 1)
+#define AD5529R_REG_MULTI_DAC_SW_LDAC		(0x142 + 1)
+#define AD5529R_REG_MULTI_DAC_INPUT_A		(0x144 + 1)
+#define AD5529R_REG_DAC_SW_LDAC			(0x146 + 1)
+
+#define AD5529R_REG_DAC_INPUT_A_BASE		(0x148 + 1)
+#define AD5529R_REG_DAC_INPUT_A(ch)		(AD5529R_REG_DAC_INPUT_A_BASE + (ch) * 2)
+
+/* Status and readback registers */
+#define AD5529R_REG_FUNC_INT_STAT		(0x168 + 1)
+#define AD5529R_REG_DAC_DATA_READBACK_BASE	(0x16A + 1)
+#define AD5529R_REG_DAC_DATA_READBACK(ch)	\
+	(AD5529R_REG_DAC_DATA_READBACK_BASE + (ch) * 2)
+
+/* Temperature sensor registers */
+#define AD5529R_REG_TSENS_EN			(0x18A + 1)
+#define AD5529R_REG_TSENS_ALERT_FLAG		(0x18C + 1)
+#define AD5529R_REG_TSENS_SHTD_FLAG		(0x18E + 1)
+#define AD5529R_REG_TSENS_ALERT_STAT		(0x190 + 1)
+#define AD5529R_REG_TSENS_SHTD_STAT		(0x192 + 1)
+#define AD5529R_REG_ALARMB_TSENS_EN		(0x194 + 1)
+#define AD5529R_REG_ALARMB_TSENS_SEL		(0x196 + 1)
+#define AD5529R_REG_TSENS_SHTD_EN_CH		(0x198 + 1)
+#define AD5529R_REG_DAC_DIS_DEGLITCH_CH		(0x19A + 1)
+#define AD5529R_REG_DAC_INT_EN			(0x19C + 1)
+#define AD5529R_REG_ALL_FUNC_INT_STAT		(0x19E + 1)
+#define AD5529R_REG_FUNC_BUSY			(0x1A0 + 1)
+#define AD5529R_REG_REF_SRC_SEL			(0x1A2 + 1)
+#define AD5529R_REG_INIT_CRC_ERR_STAT		(0x1A4 + 1)
+
+/* Hotpath registers for multi-device support */
+#define AD5529R_REG_MULTI_DAC_HOTPATH_SW_LDAC		(0x1A8 + 1)
+#define AD5529R_REG_MULTI_DAC_HOTPATH_INPUT_A_DIE_0	(0x1AA + 1)
+#define AD5529R_REG_MULTI_DAC_HOTPATH_INPUT_A_DIE_1	(0x1AC + 1)
+#define AD5529R_REG_MULTI_DAC_HOTPATH_INPUT_A_DIE_2	(0x1AE + 1)
+#define AD5529R_REG_MULTI_DAC_HOTPATH_INPUT_A_DIE_3	(0x1B0 + 1)
+#define AD5529R_REG_DAC_HOTPATH_SW_LDAC			(0x1B2 + 1)
+
+/* Hotpath per-channel DAC input registers for each die */
+#define AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_0_BASE	(0x1B4 + 1)
+#define AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_0(ch)	\
+	(AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_0_BASE + (ch) * 2)
+
+#define AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_1_BASE	(0x1D4 + 1)
+#define AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_1(ch)	\
+	(AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_1_BASE + (ch) * 2)
+
+#define AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_2_BASE	(0x1F4 + 1)
+#define AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_2(ch)	\
+	(AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_2_BASE + (ch) * 2)
+
+#define AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_3_BASE	(0x214 + 1)
+#define AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_3(ch)	\
+	(AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_3_BASE + (ch) * 2)
+
+#define   AD5529R_INTERFACE_CONFIG_A_SW_RESET	(BIT(7) | BIT(0))
+#define   AD5529R_INTERFACE_CONFIG_A_ADDR_ASCENSION	BIT(5)
+#define   AD5529R_INTERFACE_CONFIG_A_SDO_ENABLE	BIT(4)
+#define   AD5529R_INTERFACE_CONFIG_A_DEFAULT	0x10
+#define   AD5529R_NUM_CHANNELS			16
+#define   AD5529R_MAX_CHANNEL_INDEX		(AD5529R_NUM_CHANNELS - 1)
+#define   AD5529R_MAX_REGISTER			(0x232 + 1)
+#define   AD5529R_8BIT_REG_MAX			0x13
+#define   AD5529R_ADDR(reg_addr)		((reg_addr) & 0xFFF)
+#define   AD5529R_RESET_PULSE_US		1000
+#define   AD5529R_RESET_DELAY_US		10000
+#define   AD5529R_SPI_BUF_SIZE			4
+#define   AD5529R_NUM_SUPPLIES			4
+#define   AD5529R_SPI_READ_FLAG			0x80
+
+/* Device identification values */
+#define   AD5529R_PRODUCT_ID_16BIT		0x4A
+#define   AD5529R_PRODUCT_ID_12BIT		0x49
+
+struct ad5529r_model_data {
+	const char *model_name;
+	unsigned int resolution;
+	const struct iio_chan_spec *channels;
+};
+
+#define AD5529R_DAC_CHANNEL(chan, bits) {			\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.output = 1,						\
+	.channel = (chan),					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+			      BIT(IIO_CHAN_INFO_SCALE),		\
+	.scan_type = {						\
+		.sign = 'u',					\
+		.realbits = (bits),				\
+		.storagebits = 16,				\
+	},							\
+}
+
+static const char * const ad5529r_supply_names[AD5529R_NUM_SUPPLIES] = {
+	"vdd",
+	"avdd",
+	"hvdd",
+	"hvss",
+};
+
+static const struct iio_chan_spec ad5529r_channels_16bit[] = {
+	AD5529R_DAC_CHANNEL(0, 16),
+	AD5529R_DAC_CHANNEL(1, 16),
+	AD5529R_DAC_CHANNEL(2, 16),
+	AD5529R_DAC_CHANNEL(3, 16),
+	AD5529R_DAC_CHANNEL(4, 16),
+	AD5529R_DAC_CHANNEL(5, 16),
+	AD5529R_DAC_CHANNEL(6, 16),
+	AD5529R_DAC_CHANNEL(7, 16),
+	AD5529R_DAC_CHANNEL(8, 16),
+	AD5529R_DAC_CHANNEL(9, 16),
+	AD5529R_DAC_CHANNEL(10, 16),
+	AD5529R_DAC_CHANNEL(11, 16),
+	AD5529R_DAC_CHANNEL(12, 16),
+	AD5529R_DAC_CHANNEL(13, 16),
+	AD5529R_DAC_CHANNEL(14, 16),
+	AD5529R_DAC_CHANNEL(15, 16),
+};
+
+static const struct iio_chan_spec ad5529r_channels_12bit[] = {
+	AD5529R_DAC_CHANNEL(0, 12),
+	AD5529R_DAC_CHANNEL(1, 12),
+	AD5529R_DAC_CHANNEL(2, 12),
+	AD5529R_DAC_CHANNEL(3, 12),
+	AD5529R_DAC_CHANNEL(4, 12),
+	AD5529R_DAC_CHANNEL(5, 12),
+	AD5529R_DAC_CHANNEL(6, 12),
+	AD5529R_DAC_CHANNEL(7, 12),
+	AD5529R_DAC_CHANNEL(8, 12),
+	AD5529R_DAC_CHANNEL(9, 12),
+	AD5529R_DAC_CHANNEL(10, 12),
+	AD5529R_DAC_CHANNEL(11, 12),
+	AD5529R_DAC_CHANNEL(12, 12),
+	AD5529R_DAC_CHANNEL(13, 12),
+	AD5529R_DAC_CHANNEL(14, 12),
+	AD5529R_DAC_CHANNEL(15, 12),
+};
+
+static const struct ad5529r_model_data ad5529r_16bit_model_data = {
+	.model_name = "ad5529r-16",
+	.resolution = 16,
+	.channels = ad5529r_channels_16bit,
+};
+
+static const struct ad5529r_model_data ad5529r_12bit_model_data = {
+	.model_name = "ad5529r-12",
+	.resolution = 12,
+	.channels = ad5529r_channels_12bit,
+};
+
+struct ad5529r_state {
+	struct spi_device *spi;
+	const struct ad5529r_model_data *model_data;
+	struct regmap *regmap_8bit;
+	struct regmap *regmap_16bit;
+};
+
+static const struct regmap_range ad5529r_8bit_readable_ranges[] = {
+	regmap_reg_range(AD5529R_REG_INTERFACE_CONFIG_A, AD5529R_REG_CHIP_GRADE),
+	regmap_reg_range(AD5529R_REG_SCRATCH_PAD, AD5529R_REG_VENDOR_H),
+	regmap_reg_range(AD5529R_REG_STREAM_MODE, AD5529R_REG_INTERFACE_STATUS_A),
+};
+
+static const struct regmap_range ad5529r_16bit_readable_ranges[] = {
+	regmap_reg_range(AD5529R_REG_MULTI_DAC_CH_SEL, AD5529R_REG_LDAC_HW_SW),
+	regmap_reg_range(AD5529R_REG_LDAC_HW_SRC_EDGE_SEL_BASE,
+			 AD5529R_REG_LDAC_HW_SRC_EDGE_SEL_BASE + AD5529R_MAX_CHANNEL_INDEX * 2),
+	regmap_reg_range(AD5529R_REG_OUT_OPERATING_MODE, AD5529R_REG_OUT_OPERATING_MODE),
+	regmap_reg_range(AD5529R_REG_OUT_RANGE_BASE,
+			 AD5529R_REG_OUT_RANGE_BASE + AD5529R_MAX_CHANNEL_INDEX * 2),
+	regmap_reg_range(AD5529R_REG_CAL_GAIN_BASE,
+			 AD5529R_REG_CAL_GAIN_BASE + AD5529R_MAX_CHANNEL_INDEX * 2),
+	regmap_reg_range(AD5529R_REG_CAL_OFFSET_BASE,
+			 AD5529R_REG_CAL_OFFSET_BASE + AD5529R_MAX_CHANNEL_INDEX * 2),
+	regmap_reg_range(AD5529R_REG_FUNC_EN, AD5529R_REG_FUNC_EN),
+	regmap_reg_range(AD5529R_REG_FUNC_MODE_SEL_BASE,
+			 AD5529R_REG_FUNC_MODE_SEL_BASE + AD5529R_MAX_CHANNEL_INDEX * 2),
+	regmap_reg_range(AD5529R_REG_FUNC_DAC_INPUT_B_BASE,
+			 AD5529R_REG_FUNC_DAC_INPUT_B_BASE + AD5529R_MAX_CHANNEL_INDEX * 2),
+	regmap_reg_range(AD5529R_REG_FUNC_DITHER_PERIOD_BASE,
+			 AD5529R_REG_FUNC_DITHER_PERIOD_BASE + AD5529R_MAX_CHANNEL_INDEX * 2),
+	regmap_reg_range(AD5529R_REG_FUNC_DITHER_PHASE_BASE,
+			 AD5529R_REG_FUNC_DITHER_PHASE_BASE + AD5529R_MAX_CHANNEL_INDEX * 2),
+	regmap_reg_range(AD5529R_REG_FUNC_RAMP_STEP_BASE,
+			 AD5529R_REG_FUNC_RAMP_STEP_BASE + AD5529R_MAX_CHANNEL_INDEX * 2),
+	regmap_reg_range(AD5529R_REG_FUNC_INT_EN, AD5529R_REG_DAC_SW_LDAC),
+	regmap_reg_range(AD5529R_REG_DAC_INPUT_A_BASE,
+			 AD5529R_REG_DAC_INPUT_A_BASE + AD5529R_MAX_CHANNEL_INDEX * 2),
+	regmap_reg_range(AD5529R_REG_FUNC_INT_STAT, AD5529R_REG_FUNC_INT_STAT),
+	regmap_reg_range(AD5529R_REG_DAC_DATA_READBACK_BASE,
+			 AD5529R_REG_DAC_DATA_READBACK_BASE + AD5529R_MAX_CHANNEL_INDEX * 2),
+	regmap_reg_range(AD5529R_REG_TSENS_EN, AD5529R_REG_INIT_CRC_ERR_STAT),
+	regmap_reg_range(AD5529R_REG_MULTI_DAC_HOTPATH_SW_LDAC, AD5529R_REG_DAC_HOTPATH_SW_LDAC),
+	regmap_reg_range(AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_0_BASE,
+			 AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_0_BASE +
+			 AD5529R_MAX_CHANNEL_INDEX * 2),
+	regmap_reg_range(AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_1_BASE,
+			 AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_1_BASE +
+			 AD5529R_MAX_CHANNEL_INDEX * 2),
+	regmap_reg_range(AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_2_BASE,
+			 AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_2_BASE +
+			 AD5529R_MAX_CHANNEL_INDEX * 2),
+	regmap_reg_range(AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_3_BASE,
+			 AD5529R_REG_DAC_HOTPATH_INPUT_A_DIE_3_BASE +
+			 AD5529R_MAX_CHANNEL_INDEX * 2),
+};
+
+static const struct regmap_access_table ad5529r_8bit_readable_table = {
+	.yes_ranges = ad5529r_8bit_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(ad5529r_8bit_readable_ranges),
+};
+
+static const struct regmap_access_table ad5529r_16bit_readable_table = {
+	.yes_ranges = ad5529r_16bit_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(ad5529r_16bit_readable_ranges),
+};
+
+static const struct regmap_range ad5529r_8bit_read_only_ranges[] = {
+	regmap_reg_range(AD5529R_REG_CHIP_TYPE, AD5529R_REG_CHIP_GRADE),
+	regmap_reg_range(AD5529R_REG_SPI_REVISION, AD5529R_REG_VENDOR_H),
+	regmap_reg_range(AD5529R_REG_DEVICE_CONFIG, AD5529R_REG_DEVICE_CONFIG),
+};
+
+static const struct regmap_range ad5529r_16bit_read_only_ranges[] = {
+	regmap_reg_range(AD5529R_REG_TSENS_ALERT_FLAG, AD5529R_REG_TSENS_SHTD_STAT),
+	regmap_reg_range(AD5529R_REG_ALL_FUNC_INT_STAT, AD5529R_REG_FUNC_BUSY),
+	regmap_reg_range(AD5529R_REG_INIT_CRC_ERR_STAT, AD5529R_REG_INIT_CRC_ERR_STAT),
+	regmap_reg_range(AD5529R_REG_DAC_DATA_READBACK_BASE,
+			 AD5529R_REG_DAC_DATA_READBACK_BASE + AD5529R_MAX_CHANNEL_INDEX * 2),
+};
+
+static const struct regmap_access_table ad5529r_8bit_writeable_table = {
+	.no_ranges = ad5529r_8bit_read_only_ranges,
+	.n_no_ranges = ARRAY_SIZE(ad5529r_8bit_read_only_ranges),
+};
+
+static const struct regmap_access_table ad5529r_16bit_writeable_table = {
+	.no_ranges = ad5529r_16bit_read_only_ranges,
+	.n_no_ranges = ARRAY_SIZE(ad5529r_16bit_read_only_ranges),
+};
+
+static const struct regmap_config ad5529r_regmap_8bit_config = {
+	.name = "ad5529r-8bit",
+	.reg_bits = 16,
+	.val_bits = 8,
+	.max_register = AD5529R_8BIT_REG_MAX,
+	.read_flag_mask = AD5529R_SPI_READ_FLAG,
+	.rd_table = &ad5529r_8bit_readable_table,
+	.wr_table = &ad5529r_8bit_writeable_table,
+};
+
+static const struct regmap_config ad5529r_regmap_16bit_config = {
+	.name = "ad5529r-16bit",
+	.reg_bits = 16,
+	.val_bits = 16,
+	.max_register = AD5529R_MAX_REGISTER,
+	.read_flag_mask = AD5529R_SPI_READ_FLAG,
+	.rd_table = &ad5529r_16bit_readable_table,
+	.wr_table = &ad5529r_16bit_writeable_table,
+};
+
+static struct regmap *ad5529r_get_regmap(struct ad5529r_state *st, unsigned int reg)
+{
+	if (reg <= AD5529R_8BIT_REG_MAX)
+		return st->regmap_8bit;
+
+	return st->regmap_16bit;
+}
+
+static int ad5529r_debugfs_reg_read(struct ad5529r_state *st, unsigned int reg,
+				    unsigned int *val)
+{
+	return regmap_read(ad5529r_get_regmap(st, reg), reg, val);
+}
+
+static int ad5529r_debugfs_reg_write(struct ad5529r_state *st, unsigned int reg,
+				     unsigned int val)
+{
+	return regmap_write(ad5529r_get_regmap(st, reg), reg, val);
+}
+
+static int ad5529r_detect_device(struct ad5529r_state *st)
+{
+	unsigned int product_id;
+	int ret;
+
+	ret = regmap_read(st->regmap_8bit, AD5529R_REG_PRODUCT_ID_L, &product_id);
+	if (ret)
+		return ret;
+
+	switch (product_id) {
+	case AD5529R_PRODUCT_ID_16BIT:
+		st->model_data = &ad5529r_16bit_model_data;
+		break;
+	case AD5529R_PRODUCT_ID_12BIT:
+		st->model_data = &ad5529r_12bit_model_data;
+		break;
+	default:
+		dev_err(&st->spi->dev, "Unknown product ID: 0x%02X\n", product_id);
+		return -ENODEV;
+	}
+
+	dev_dbg(&st->spi->dev, "Detected %s variant (Product ID: 0x%02X)\n",
+		st->model_data->model_name, product_id);
+
+	return 0;
+}
+
+static int ad5529r_reset(struct ad5529r_state *st)
+{
+	struct reset_control *rst;
+	int ret;
+
+	rst = devm_reset_control_get_optional_exclusive(&st->spi->dev, NULL);
+	if (IS_ERR(rst))
+		return PTR_ERR(rst);
+
+	if (rst) {
+		ret = reset_control_deassert(rst);
+		if (ret)
+			return ret;
+	} else {
+		ret = regmap_write(st->regmap_8bit, AD5529R_REG_INTERFACE_CONFIG_A,
+				   AD5529R_INTERFACE_CONFIG_A_SW_RESET);
+		if (ret)
+			return ret;
+	}
+
+	fsleep(AD5529R_RESET_DELAY_US);
+
+	return regmap_write(st->regmap_8bit, AD5529R_REG_INTERFACE_CONFIG_A,
+			   AD5529R_INTERFACE_CONFIG_A_DEFAULT);
+}
+
+static int ad5529r_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct ad5529r_state *st = iio_priv(indio_dev);
+	unsigned int reg_addr;
+	unsigned int reg_val_h;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		reg_addr = AD5529R_REG_DAC_INPUT_A(chan->channel);
+		ret = regmap_read(st->regmap_16bit, reg_addr, &reg_val_h);
+		if (ret)
+			return ret;
+
+		*val = reg_val_h;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		/*
+		 * Using default 0-5V range: VOUTn = A × D/2^N + B
+		 * where A = 5V, B = 0V, D = digital code, N = resolution
+		 * Scale = 5V / 2^resolution
+		 */
+		*val = 5;
+		*val2 = st->model_data->resolution;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad5529r_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct ad5529r_state *st = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (val < 0 || val > GENMASK(st->model_data->resolution - 1, 0))
+			return -EINVAL;
+
+		return regmap_write(st->regmap_16bit, AD5529R_REG_DAC_INPUT_A(chan->channel), val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad5529r_reg_access(struct iio_dev *indio_dev,
+			      unsigned int reg,
+			      unsigned int writeval,
+			      unsigned int *readval)
+{
+	struct ad5529r_state *st = iio_priv(indio_dev);
+
+	if (!readval)
+		return ad5529r_debugfs_reg_write(st, reg, writeval);
+
+	return ad5529r_debugfs_reg_read(st, reg, readval);
+}
+
+static const struct iio_info ad5529r_info = {
+	.read_raw = ad5529r_read_raw,
+	.write_raw = ad5529r_write_raw,
+	.debugfs_reg_access = ad5529r_reg_access,
+};
+
+static int ad5529r_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct iio_dev *indio_dev;
+	struct ad5529r_state *st;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	st->spi = spi;
+
+	ret = devm_regulator_bulk_get_enable(dev, AD5529R_NUM_SUPPLIES,
+					     ad5529r_supply_names);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get and enable regulators\n");
+
+	st->regmap_8bit = devm_regmap_init_spi(spi, &ad5529r_regmap_8bit_config);
+	if (IS_ERR(st->regmap_8bit))
+		return dev_err_probe(dev, PTR_ERR(st->regmap_8bit),
+				     "Failed to initialize 8-bit regmap\n");
+
+	st->regmap_16bit = devm_regmap_init_spi(spi, &ad5529r_regmap_16bit_config);
+	if (IS_ERR(st->regmap_16bit))
+		return dev_err_probe(dev, PTR_ERR(st->regmap_16bit),
+				     "Failed to initialize 16-bit regmap\n");
+
+	ret = ad5529r_reset(st);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to reset device\n");
+
+	ret = ad5529r_detect_device(st);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to detect device variant\n");
+
+	indio_dev->name = st->model_data->model_name;
+	indio_dev->info = &ad5529r_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = st->model_data->channels;
+	indio_dev->num_channels = AD5529R_NUM_CHANNELS;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id ad5529r_of_match[] = {
+	{ .compatible = "adi,ad5529r" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ad5529r_of_match);
+
+static const struct spi_device_id ad5529r_id[] = {
+	{ "ad5529r" },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ad5529r_id);
+
+static struct spi_driver ad5529r_driver = {
+	.driver = {
+		.name = "ad5529r",
+		.of_match_table = ad5529r_of_match,
+	},
+	.probe = ad5529r_probe,
+	.id_table = ad5529r_id,
+};
+module_spi_driver(ad5529r_driver);
+
+MODULE_AUTHOR("Janani Sunil <janani.sunil@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD5529R 12/16-bit DAC driver");
+MODULE_LICENSE("GPL");

-- 
2.43.0

[PATCH 3/3] Documentation: iio: Add AD5529R Documentation

[Janani Sunil]

Add documentation for AD5529R high voltage, 16-channel 12/16 bit DAC

Signed-off-by: Janani Sunil <janani.sunil@analog.com>
---
 Documentation/iio/ad5529r.rst | 214 ++++++++++++++++++++++++++++++++++++++++++
 Documentation/iio/index.rst   |   1 +
 MAINTAINERS                   |   1 +
 3 files changed, 216 insertions(+)

diff --git a/Documentation/iio/ad5529r.rst b/Documentation/iio/ad5529r.rst
new file mode 100644
index 000000000000..c9760945eee7
--- /dev/null
+++ b/Documentation/iio/ad5529r.rst
@@ -0,0 +1,214 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+==============
+AD5529R driver
+==============
+
+Device driver for Analog Devices Inc. AD5529R 16-Channel 12/16-bit High Voltage DAC.
+The module name is ``ad5529r``.
+
+Supported devices
+=================
+
+* `AD5529R <https://www.analog.com/en/products/ad5529r.html>`_
+
+Description
+===========
+
+The AD5529R is a 16-channel, 12-bit or 16-bit, high voltage, buffered voltage output
+digital-to-analog converter (DAC) with an integrated precision reference.
+The device operates from unipolar and bipolar supplies and is guaranteed
+monotonic. It has built-in rail-to-rail output buffers that can source or
+sink up to 25mA.
+
+Hardware Features
+=================
+
+* 16 independent 12-bit or 16-bit DAC channels
+* Independently programmable output ranges:
+
+  - 0V to 5V (current driver default)
+  - 0V to 10V
+  - 0V to 20V
+  - 0V to 40V
+  - ±5V to ±15V
+  - ±10V to ±20V
+
+* 4.096V precision reference (12ppm/°C maximum)
+* Built-in function generation capabilities (hardware support)
+* Output voltage and current monitoring (hardware support)
+* Temperature monitoring with 8 on-chip sensors (hardware support)
+* Over-temperature protection
+* SPI interface with CRC error detection support
+
+Current Driver Implementation
+=============================
+
+The current driver provides basic DAC functionality with the following features:
+
+* Basic DAC output control for all 16 channels
+* Scale attributes for voltage conversion (0-5V default range)
+* SPI communication with regmap support
+* Reset control framework support
+* Automatic hardware variant detection (16-bit vs 12-bit) based on product ID
+* Debugfs register access for development
+
+SPI Configuration:
+
+* **Mode**: Supports SPI mode 0 and mode 3 (default: mode 0)
+* **Frequency**: Up to 50 MHz (typically tested at lower frequencies)
+* **Word Size**: 16-bit transactions
+
+.. note::
+   The device default configuration uses address decrement mode (ADDR_ASCENSION=0)
+   for multi-byte SPI transactions. Therefore, all 16-bit register addresses are
+   incremented by 1 in the driver to access the last byte first, allowing the
+   hardware to decrement and access the complete multi-byte register correctly.
+
+IIO Attributes (Currently Implemented)
+======================================
+
+Basic DAC Control
+-----------------
+
+For each of the 16 channels (0-15):
+
+**out_voltageY_raw**
+  Raw DAC code (12-bit: 0-4095, 16-bit: 0-65535)
+
+  * Read: Returns the current DAC register value
+  * Write: Sets the DAC output code
+
+**out_voltageY_scale**
+  Scale factor for voltage conversion (microvolts per LSB)
+
+  Based on the formula: VOUTn = A × D/2^N + B, where A=5V, B=0V, N=resolution
+
+  * 16-bit: 76.294 µV/LSB (5V ÷ 2^16 = 5V ÷ 65536 = 76.294µV)
+  * 12-bit: 1220.703 µV/LSB (5V ÷ 2^12 = 5V ÷ 4096 = 1.220703mV)
+  * Read-only attribute
+
+Debug Interface
+===============
+
+**Register Access**
+
+The driver provides debugfs register access for debugging and development:
+
+``/sys/kernel/debug/iio/iio:deviceX/direct_reg_access``
+  Direct register read/write access. Format:
+
+  * Read: ``echo <register_address> > direct_reg_access; cat direct_reg_access``
+  * Write: ``echo <register_address> <value> > direct_reg_access``
+
+Usage examples
+==============
+
+Basic DAC Output Control
+------------------------
+
+.. code-block:: bash
+
+    # Set channel 0 to mid-scale (approximately 2.048V with 4.096V reference)
+    echo "32768" > /sys/bus/iio/devices/iio:device0/out_voltage0_raw
+
+    # Set channel 15 to full scale
+    echo "65535" > /sys/bus/iio/devices/iio:device0/out_voltage15_raw
+
+    # Read current value from channel 5
+    cat /sys/bus/iio/devices/iio:device0/out_voltage5_raw
+
+Scale Attributes
+----------------
+
+.. code-block:: bash
+
+    # Read scale factor (microvolts per LSB)
+    cat /sys/bus/iio/devices/iio:device0/out_voltage0_scale
+    # Output: 0.076294 (for 16-bit) or 1.220703 (for 12-bit)
+
+    # Convert raw to voltage: voltage_uv = raw * scale
+    # Formula: VOUTn = A × D/2^N + B where A=5V, B=0V
+
+Register Access for Development
+-------------------------------
+
+.. code-block:: bash
+
+    # Navigate to debugfs directory
+    cd /sys/kernel/debug/iio/iio:device0/
+
+    # Read device product ID (register 0x04)
+    echo 4 > direct_reg_access
+    cat direct_reg_access
+
+    # Write to a 16-bit configuration register (example: LDAC_HW_SW register 0x19)
+    echo "0x019 0xAA11" > direct_reg_access
+    cat direct_reg_access
+    # Output: 0xAA11
+
+    # Write to DAC channel registers (16-bit values)
+    echo "0x149 32768" > direct_reg_access   # DAC channel 0 mid-scale
+    echo "0x14B 65535" > direct_reg_access   # DAC channel 1 full-scale
+
+    # Read back DAC register values
+    echo 0x149 > direct_reg_access && cat direct_reg_access  # Read channel 0
+    echo 0x14B > direct_reg_access && cat direct_reg_access  # Read channel 1
+
+.. note::
+   For 16-bit registers, use hexadecimal format for addresses (0x019, 0x149, etc.).
+   Values can be decimal (32768) or hexadecimal (0xAA11). Register addresses shown
+   include the +1 offset required for decrement mode operation.
+
+Device Tree Configuration
+=========================
+
+Basic configuration example:
+
+.. code-block:: devicetree
+
+    &spi0 {
+        status = "okay";
+
+        ad5529r@0 {
+            compatible = "adi,ad5529r";
+            reg = <0>;
+            spi-max-frequency = <25000000>;
+
+            vdd-supply = <&vdd_regulator>;
+            avdd-supply = <&avdd_regulator>;
+            hvdd-supply = <&hvdd_regulator>;
+            hvss-supply = <&hvss_regulator>;
+
+            reset-gpios = <&gpio0 87 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+For complete device tree binding documentation, see:
+``Documentation/devicetree/bindings/iio/dac/adi,ad5529r.yaml``
+
+Driver Architecture
+===================
+
+The driver is structured as follows:
+
+* **Core**: Basic SPI communication and device initialization
+* **IIO Interface**: Standard IIO DAC channel interface with scale attributes
+* **Dual Regmap**: Uses standard regmap-spi for both 8-bit and 16-bit register access
+* **Reset Framework**: Reset control support
+
+Development Notes
+=================
+
+* The driver uses standard regmap-spi for both 8-bit and 16-bit register access
+* SPI mode 0 (CPOL=0, CPHA=0) is typically used
+* Reset control framework support for device initialization
+* Register addresses are incremented by 1 for 16-bit registers due to decrement mode addressing
+* Scale attributes provide voltage conversion for 0-5V range
+* Automatic regmap selection based on register address (≤0x13: 8-bit, >0x13: 16-bit)
+
+References
+==========
+
+* AD5529R Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad5529r.pdf
+* Linux IIO Subsystem: https://www.kernel.org/doc/html/latest/driver-api/iio/index.html
\ No newline at end of file
diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst
index 007e0a1fcc5a..4b1d0432a040 100644
--- a/Documentation/iio/index.rst
+++ b/Documentation/iio/index.rst
@@ -21,6 +21,7 @@ Industrial I/O Kernel Drivers
 
    ad3552r
    ad4000
+   ad5529r
    ad4030
    ad4062
    ad4691
diff --git a/MAINTAINERS b/MAINTAINERS
index 143714e27d51..41f42eb1adf2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1513,6 +1513,7 @@ L:	linux-iio@vger.kernel.org
 S:	Supported
 W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/devicetree/bindings/iio/dac/adi,ad5529r.yaml
+F:	Documentation/iio/ad5529r.rst
 F:	drivers/iio/dac/ad5529r.c
 
 ANALOG DEVICES INC AD5706R DRIVER

-- 
2.43.0

Re: [PATCH 1/3] dt-bindings: iio: dac: Add AD5529R

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 380 bytes --]

On Thu, May 07, 2026 at 06:28:09PM +0200, Janani Sunil wrote:
> Devicetree bindings for AD5529R 16 channel 12/16 bit high voltage,
> buffered voltage output digital-to-analog converter (DAC) with an
> integrated precision reference.
> 
> Signed-off-by: Janani Sunil <janani.sunil@analog.com>

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: not-applicable

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 0/3] iio: dac: Add support for AD5529R DAC

[Andy Shevchenko]

On Thu, May 07, 2026 at 06:28:08PM +0200, Janani Sunil wrote:
> This patch series adds support for Analog Devices AD5529R, a 16 channel
> 16 and 12 bit voltage Digital-to-Analog Converter (DAC) with integrated
> precision reference. The AD5529R operates from both unipolar and
> bipolar supplies. The device communicates via SPI interface.
> 
> **Device Overview:**
> The AD5529R features 16 independent DAC channels, with 16 or 12 bit
> resolution, allowing independently programmable output ranges. The
> internal 4.096V precision reference sets the accuracy of the output
> voltage.
> 
> **Features Implemented:**
> - Automatic detection of 12/16 bit generic with product ID read.
> - Reset support via GPIO.
> - Dual regmap configuration to handle 8 and 16 bit registers.
> 
> **Patch Summary:**
> 1. **dt-bindings**: Binding documentation with channel configuration.
> 2. **driver**: Implement IIO DAC Driver with regmap support.
> 3. **documentation**: Add driver documentation with usage examples.
> 
> **Testing:**
> The driver was compiled and tested on the EVAL-AD5529R-ARDZ using a
> coraZ7 with a mainline v7.0 kernel.

Missed section for a new driver. Id est answer the question "Why a new brand
driver? Do we have something similar in IIO  already to be expanded to cover
this HW part?"

-- 
With Best Regards,
Andy Shevchenko