[PATCH RFC v4 09/10] Documentation: ABI: testing: add docs for ad9910 sysfs entries

[Rodrigo Alencar via B4 Relay <devnull+rodrigo.alencar.analog.com@kernel.org>]

From: Rodrigo Alencar <rodrigo.alencar@analog.com>

Add custom ABI documentation file for the DDS AD9910 with sysfs entries to
control Parallel Port, Digital Ramp Generator and OSK parameters.

Signed-off-by: Rodrigo Alencar <rodrigo.alencar@analog.com>
---
 .../ABI/testing/sysfs-bus-iio-frequency-ad9910     | 73 ++++++++++++++++++++++
 MAINTAINERS                                        |  1 +
 2 files changed, 74 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9910 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9910
new file mode 100644
index 000000000000..eb0ff96a6e10
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9910
@@ -0,0 +1,73 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_offset
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		For a channel that allows frequency control through buffers, this
+		represents the base frequency value in Hz. The actual output frequency
+		is a result with the sum of this value.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_scale
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		For a channel that allows frequency control through buffers, this
+		represents the frequency modulation gain. This value multiplies the
+		buffer input sample value before it is added to a frequency offset.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase_offset
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		For a channel that allows phase control through buffers, this
+		represents the base phase value in radians. The actual output phase
+		is a result with the sum of this value.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale_offset
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		For a channel that allows amplitude control through buffers, this
+		represents the value for a base amplitude scale. The actual output
+		amplitude scale is a result with the sum of this value.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_dwell_en
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		For a channel that produces parametric sweeps, this attribute controls
+		the sweep behavior at the configured limits. It enables dwell mode at a
+		sweep limit when set to 1. Otherwise, the sweep may stop at the initial
+		position or restart from that initial position or continue by reversing
+		its direction.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_roc
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Frequency rate of change in Hz/s for channels that produce linear
+		frequency sweeps. This value may be influenced by the channel's
+		sampling_frequency setting.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase_roc
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Phase rate of change in rad/s for channels that produce linear
+		phase sweeps. This value may be influenced by the channel's
+		sampling_frequency setting.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale_roc
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Amplitude scale rate of change in 1/s for channels that ramp
+		amplitude. This value may be influenced by the channel's
+		sampling_frequency setting.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale_roc_available
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists the available scale_roc values for the channel based on
+		the current sampling_frequency. Values are space-separated in
+		ascending order.
diff --git a/MAINTAINERS b/MAINTAINERS
index 6a53b202a84d..b52c0aae96b7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1643,6 +1643,7 @@ M:	Rodrigo Alencar <rodrigo.alencar@analog.com>
 L:	linux-iio@vger.kernel.org
 S:	Supported
 W:	https://ez.analog.com/linux-software-drivers
+F:	Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9910
 F:	Documentation/devicetree/bindings/iio/frequency/adi,ad9910.yaml
 F:	drivers/iio/frequency/ad9910.c
 

-- 
2.43.0