Devicetree
 help / color / mirror / Atom feed
From: Pramod Maurya <pramod.nexgen@gmail.com>
To: robh@kernel.org
Cc: jacobsfeder@gmail.com, pramod.nexgen@gmail.com,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] dt-bindings: misc: Add binding for Xilinx AXI-Stream FIFO
Date: Sat,  9 May 2026 13:16:46 -0400	[thread overview]
Message-ID: <20260509171648.46933-1-pramod.nexgen@gmail.com> (raw)

Add a YAML schema for the Xilinx AXI-Stream FIFO IP core (PG080).
The binding documents the three supported compatible strings and all
vendor-specific properties that the axis-fifo driver reads from the
device tree.

This resolves the following checkpatch.pl warnings in
drivers/staging/axis-fifo/axis-fifo.c:
  WARNING: DT compatible string "xlnx,axi-fifo-mm-s-4.1" appears un-documented
  WARNING: DT compatible string "xlnx,axi-fifo-mm-s-4.2" appears un-documented
  WARNING: DT compatible string "xlnx,axi-fifo-mm-s-4.3" appears un-documented

Signed-off-by: Pramod Maurya <pramod.nexgen@gmail.com>
---
 .../bindings/misc/xlnx,axi-fifo-mm-s.yaml     | 92 +++++++++++++++++++
 MAINTAINERS                                   |  6 ++
 2 files changed, 98 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/xlnx,axi-fifo-mm-s.yaml

diff --git a/Documentation/devicetree/bindings/misc/xlnx,axi-fifo-mm-s.yaml b/Documentation/devicetree/bindings/misc/xlnx,axi-fifo-mm-s.yaml
new file mode 100644
index 000000000000..1e07db9cd456
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/xlnx,axi-fifo-mm-s.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/xlnx,axi-fifo-mm-s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI-Stream FIFO
+
+maintainers:
+  - Jacob Feder <jacobsfeder@gmail.com>
+
+description:
+  The Xilinx AXI-Stream FIFO (PG080) provides a memory-mapped interface to
+  an AXI-Stream FIFO IP core. It allows a processor to transmit and receive
+  AXI-Stream packets via simple MMIO register reads and writes.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,axi-fifo-mm-s-4.1
+      - xlnx,axi-fifo-mm-s-4.2
+      - xlnx,axi-fifo-mm-s-4.3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  xlnx,axi-str-rxd-tdata-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Width of the receive AXI-Stream data bus in bits. Currently only 32
+      is supported.
+    const: 32
+
+  xlnx,axi-str-txd-tdata-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Width of the transmit AXI-Stream data bus in bits. Currently only 32
+      is supported.
+    const: 32
+
+  xlnx,rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Depth of the receive FIFO in words.
+
+  xlnx,tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Depth of the transmit FIFO in words.
+
+  xlnx,use-rx-data:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Set to 1 if the receive data FIFO is enabled, 0 otherwise.
+    enum: [0, 1]
+
+  xlnx,use-tx-data:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Set to 1 if the transmit data FIFO is enabled, 0 otherwise.
+    enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - xlnx,axi-str-rxd-tdata-width
+  - xlnx,axi-str-txd-tdata-width
+  - xlnx,rx-fifo-depth
+  - xlnx,tx-fifo-depth
+  - xlnx,use-rx-data
+  - xlnx,use-tx-data
+
+additionalProperties: false
+
+examples:
+  - |
+    axi_fifo: fifo@43c00000 {
+        compatible = "xlnx,axi-fifo-mm-s-4.3";
+        reg = <0x43c00000 0x10000>;
+        interrupts = <0 30 4>;
+        interrupt-parent = <&gic>;
+        xlnx,axi-str-rxd-tdata-width = <32>;
+        xlnx,axi-str-txd-tdata-width = <32>;
+        xlnx,rx-fifo-depth = <0x1000>;
+        xlnx,tx-fifo-depth = <0x1000>;
+        xlnx,use-rx-data = <1>;
+        xlnx,use-tx-data = <1>;
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9b107057ad8c..84be7c8ae257 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -29130,6 +29130,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml
 F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 
+XILINX AXI-STREAM FIFO DRIVER
+M:	Jacob Feder <jacobsfeder@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/misc/xlnx,axi-fifo-mm-s.yaml
+F:	drivers/staging/axis-fifo/
+
 XILINX CAN DRIVER
 M:	Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
 L:	linux-can@vger.kernel.org
-- 
2.52.0


             reply	other threads:[~2026-05-09 17:17 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-09 17:16 Pramod Maurya [this message]
2026-05-09 17:52 ` [PATCH] dt-bindings: misc: Add binding for Xilinx AXI-Stream FIFO sashiko-bot
2026-05-09 18:11 ` Conor Dooley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260509171648.46933-1-pramod.nexgen@gmail.com \
    --to=pramod.nexgen@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jacobsfeder@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox