Devicetree
 help / color / mirror / Atom feed
* [PATCH 0/2] arm64: qcom: add Ayaneo Pocket DS gaming console
@ 2026-05-10 16:05 Alexandre Hamamdjian via B4 Relay
  2026-05-10 16:05 ` [PATCH 1/2] dt-bindings: arm: qcom: document the Ayaneo Pocket DS Alexandre Hamamdjian via B4 Relay
  2026-05-10 16:05 ` [PATCH 2/2] arm64: dts: qcom: add basic devicetree for Ayaneo Pocket DS gaming console Alexandre Hamamdjian via B4 Relay
  0 siblings, 2 replies; 3+ messages in thread
From: Alexandre Hamamdjian via B4 Relay @ 2026-05-10 16:05 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley
  Cc: linux-arm-msm, devicetree, linux-kernel, Alexandre Hamamdjian,
	Teguh Sobirin

This series adds initial support for the Ayaneo Pocket DS, a handheld
gaming console built around the Qualcomm QCS8550 SoC.

This introduces the device tree itself, split into:
- qcs8550-ayaneo-pocket-common.dtsi: shared QCS8550 board base
  intended to be reused by future siblings in the same family.
- qcs8550-ayaneo-pocketds.dts: This device's DTS

Only the basics are wired up at this stage (boot to console, core
peripherals enabled in the common dtsi); additional functionality
will follow in later submissions.

Signed-off-by: Alexandre Hamamdjian <azkali.limited@gmail.com>
---
Teguh Sobirin (2):
      dt-bindings: arm: qcom: document the Ayaneo Pocket DS
      arm64: dts: qcom: add basic devicetree for Ayaneo Pocket DS gaming console

 Documentation/devicetree/bindings/arm/qcom.yaml    |    6 +
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 .../dts/qcom/qcs8550-ayaneo-pocket-common.dtsi     | 1596 ++++++++++++++++++++
 .../boot/dts/qcom/qcs8550-ayaneo-pocketds.dts      |  170 +++
 4 files changed, 1773 insertions(+)
---
base-commit: e98d21c170b01ddef366f023bbfcf6b31509fa83
change-id: 20260510-pocketds-e0e7b99cf369

Best regards,
--  
Alexandre Hamamdjian <azkali.limited@gmail.com>



^ permalink raw reply	[flat|nested] 3+ messages in thread

* [PATCH 1/2] dt-bindings: arm: qcom: document the Ayaneo Pocket DS
  2026-05-10 16:05 [PATCH 0/2] arm64: qcom: add Ayaneo Pocket DS gaming console Alexandre Hamamdjian via B4 Relay
@ 2026-05-10 16:05 ` Alexandre Hamamdjian via B4 Relay
  2026-05-10 16:05 ` [PATCH 2/2] arm64: dts: qcom: add basic devicetree for Ayaneo Pocket DS gaming console Alexandre Hamamdjian via B4 Relay
  1 sibling, 0 replies; 3+ messages in thread
From: Alexandre Hamamdjian via B4 Relay @ 2026-05-10 16:05 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley
  Cc: linux-arm-msm, devicetree, linux-kernel, Alexandre Hamamdjian,
	Teguh Sobirin

From: Teguh Sobirin <teguh@sobir.in>

Document the Qualcomm QCS8550 based Ayaneo Pocket DS gaming console.

Co-developed-by: Alexandre Hamamdjian <azkali.limited@gmail.com>
Signed-off-by: Alexandre Hamamdjian <azkali.limited@gmail.com>
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 2741c07e9f41..f130a6b092b9 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -1107,6 +1107,12 @@ properties:
           - const: qcom,qcs8550
           - const: qcom,sm8550
 
+      - items:
+          - enum:
+              - ayaneo,pocketds
+          - const: qcom,qcs8550
+          - const: qcom,sm8550
+
       - items:
           - enum:
               - ayaneo,pocket-s2

-- 
2.54.0



^ permalink raw reply related	[flat|nested] 3+ messages in thread

* [PATCH 2/2] arm64: dts: qcom: add basic devicetree for Ayaneo Pocket DS gaming console
  2026-05-10 16:05 [PATCH 0/2] arm64: qcom: add Ayaneo Pocket DS gaming console Alexandre Hamamdjian via B4 Relay
  2026-05-10 16:05 ` [PATCH 1/2] dt-bindings: arm: qcom: document the Ayaneo Pocket DS Alexandre Hamamdjian via B4 Relay
@ 2026-05-10 16:05 ` Alexandre Hamamdjian via B4 Relay
  1 sibling, 0 replies; 3+ messages in thread
From: Alexandre Hamamdjian via B4 Relay @ 2026-05-10 16:05 UTC (permalink / raw)
  To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
	Conor Dooley
  Cc: linux-arm-msm, devicetree, linux-kernel, Alexandre Hamamdjian,
	Teguh Sobirin

From: Teguh Sobirin <teguh@sobir.in>

Add initial device tree support for the Ayaneo Pocket DS gaming
console based on the Qualcomm QCS8550 platform.

The board file is split into qcs8550-ayaneo-pocket-common.dtsi and
qcs8550-ayaneo-pocketds.dts in anticipation of additional boards in
the same family that share the QCS8550 base. Only the Pocket DS has
been verified on hardware so far; the shared dtsi is intended to pick
up sibling boards as they are submitted.

Co-developed-by: Alexandre Hamamdjian <azkali.limited@gmail.com>
Signed-off-by: Alexandre Hamamdjian <azkali.limited@gmail.com>
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
---
 arch/arm64/boot/dts/qcom/Makefile                  |    1 +
 .../dts/qcom/qcs8550-ayaneo-pocket-common.dtsi     | 1596 ++++++++++++++++++++
 .../boot/dts/qcom/qcs8550-ayaneo-pocketds.dts      |  170 +++
 3 files changed, 1767 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index cc42829f92eb..45859e977bc9 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -185,6 +185,7 @@ qcs8300-ride-el2-dtbs := qcs8300-ride.dtb monaco-el2.dtbo
 
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8300-ride-el2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-ayaneo-pocketds.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride-r3.dtb
 
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocket-common.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocket-common.dtsi
new file mode 100644
index 000000000000..8d215a9d31d5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocket-common.dtsi
@@ -0,0 +1,1596 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Teguh Sobirin.
+ */
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcs8550.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+
+/delete-node/ &aop_image_mem;
+/delete-node/ &aop_config_mem;
+/delete-node/ &camera_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &mpss_dsm_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &q6_mpss_dtb_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &q6_cdsp_dtb_mem;
+
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &remoteproc_cdsp;
+
+/ {
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &uart7;
+		serial1 = &uart14;
+		hsuart0 = &uart11;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			debounce-interval = <15>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&redriver_ss_out>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		hyp_mem: hyp-region@80000000 {
+			reg = <0 0x80000000 0 0xa00000>;
+			no-map;
+		};
+
+		cpusys_vm_mem: cpusys-vm-region@80a00000 {
+			reg = <0 0x80a00000 0 0x400000>;
+			no-map;
+		};
+
+		hyp_tags_mem: hyp-tags-region@80e00000 {
+			reg = <0 0x80e00000 0 0x3d0000>;
+			no-map;
+		};
+
+		xbl_sc_mem: xbl-sc-region@d8100000 {
+			reg = <0 0xd8100000 0 0x40000>;
+			no-map;
+		};
+
+		hyp_tags_reserved_mem: hyp-tags-reserved-region@811d0000 {
+			reg = <0 0x811d0000 0 0x30000>;
+			no-map;
+		};
+
+		xbl_dt_log_merged_mem: xbl-dt-log-merged-region@81a00000 {
+			reg = <0 0x81a00000 0 0x260000>;
+			no-map;
+		};
+
+		aop_config_merged_mem: aop-config-merged-region@81c80000 {
+			reg = <0 0x81c80000 0 0x74000>;
+			no-map;
+		};
+
+		chipinfo_mem: chipinfo-region@81cf4000 {
+			reg = <0 0x81cf4000 0 0x1000>;
+			no-map;
+		};
+
+		global_sync_mem: global-sync-region@82600000 {
+			reg = <0 0x82600000 0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat-region@82700000 {
+			reg = <0 0x82700000 0 0x100000>;
+			no-map;
+		};
+
+		cpucp_fw_mem: cpucp-fw-region@d8140000 {
+			reg = <0 0xd8140000 0 0x1c0000>;
+			no-map;
+		};
+
+		qtee_mem: qtee-region@d8300000 {
+			reg = <0 0xd8300000 0 0x500000>;
+			no-map;
+		};
+
+		hwfence_shbuf: hwfence-shbuf-region@e6440000 {
+			reg = <0 0xe6440000 0 0x2dd000>;
+			no-map;
+		};
+
+		hyp_ext_reserved_mem: hyp-ext-reserved-region@ff700000 {
+			reg = <0 0xff700000 0 0x100000>;
+			no-map;
+		};
+
+		llcc_lpi_mem: llcc_lpi_region@ff800000 {
+			reg = <0 0xff800000 0 0x600000>;
+			no-map;
+		};
+
+		hyp_ext_tags_mem: hyp-ext-tags-region@fce00000 {
+			reg = <0 0xfce00000 0 0x2900000>;
+			no-map;
+		};
+
+		splash_region: splash_region@b8000000 {
+			reg = <0x0 0xb8000000 0x0 0x2b00000>;
+			label = "cont_splash_region";
+			no-map;
+		};
+	};
+
+	sound {
+		status = "okay";
+		compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard";
+		model = "SM8550-APS";
+		audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA_SPK2 OUT",
+				"VA DMIC0", "vdd-micb",
+				"VA DMIC1", "vdd-micb";
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&spk_amp_l>,
+					<&spk_amp_r>,
+					<&swr0 0>,
+					<&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	thermal-zones {
+		cpuss0-thermal {
+			polling-delay = <200>;
+			trips {
+				cpuss0_fan0: trip-point2 {
+					temperature = <40000>;
+					hysteresis = <3000>;
+					type = "passive";
+					};
+				cpuss0_fan1: trip-point3 {
+					temperature = <50000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss0_fan2: trip-point4 {
+					temperature = <60000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss0_fan3: trip-point5 {
+					temperature = <65000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss0_fan4: trip-point6 {
+					temperature = <70000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss0_fan5: trip-point7 {
+					temperature = <75000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss0_fan6: trip-point8 {
+					temperature = <80000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+			};
+
+		};
+		cpuss1-thermal {
+			polling-delay = <200>;
+			trips {
+				cpuss1_fan0: trip-point2 {
+					temperature = <40000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss1_fan1: trip-point3 {
+					temperature = <50000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss1_fan2: trip-point4 {
+					temperature = <60000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss1_fan3: trip-point5 {
+					temperature = <65000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss1_fan4: trip-point6 {
+					temperature = <70000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss1_fan5: trip-point7 {
+					temperature = <75000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss1_fan6: trip-point8 {
+					temperature = <80000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+			};
+
+		};
+		cpuss2-thermal {
+			polling-delay = <200>;
+			trips {
+				cpuss2_fan0: trip-point2 {
+					temperature = <40000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss2_fan1: trip-point3 {
+					temperature = <50000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss2_fan2: trip-point4 {
+					temperature = <60000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss2_fan3: trip-point5 {
+					temperature = <65000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss2_fan4: trip-point6 {
+					temperature = <70000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss2_fan5: trip-point7 {
+					temperature = <75000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss2_fan6: trip-point8 {
+					temperature = <80000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+			};
+
+		};
+		cpuss3-thermal {
+			polling-delay = <200>;
+			trips {
+				cpuss3_fan0: trip-point2 {
+					temperature = <40000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss3_fan1: trip-point3 {
+					temperature = <50000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss3_fan2: trip-point4 {
+					temperature = <60000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss3_fan3: trip-point5 {
+					temperature = <65000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss3_fan4: trip-point6 {
+					temperature = <70000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss3_fan5: trip-point7 {
+					temperature = <75000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpuss3_fan6: trip-point8 {
+					temperature = <80000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+			};
+
+		};
+		cpu7-top-thermal {
+			polling-delay = <200>;
+			trips {
+				cpu7_top_fan0: trip-point2 {
+					temperature = <70000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpu7_top_fan1: trip-point3 {
+					temperature = <75000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				cpu7_top_fan2: trip-point4 {
+					temperature = <80000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+			};
+
+		};
+		gpuss-0-thermal {
+			polling-delay = <200>;
+			trips {
+				gpuss0_fan0: trip-point3 {
+					temperature = <70000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss0_fan1: trip-point4 {
+					temperature = <75000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss0_fan2: trip-point5 {
+					temperature = <80000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+			};
+
+		};
+		gpuss-1-thermal {
+			polling-delay = <200>;
+			trips {
+				gpuss1_fan0: trip-point3 {
+					temperature = <70000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss1_fan1: trip-point4 {
+					temperature = <75000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss1_fan2: trip-point5 {
+					temperature = <80000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+			};
+
+		};
+		gpuss-2-thermal {
+			polling-delay = <200>;
+			trips {
+				gpuss2_fan0: trip-point3 {
+					temperature = <70000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss2_fan1: trip-point4 {
+					temperature = <75000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss2_fan2: trip-point5 {
+					temperature = <80000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+			};
+
+		};
+		gpuss-3-thermal {
+			polling-delay = <200>;
+			trips {
+				gpuss3_fan0: trip-point3 {
+					temperature = <70000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss3_fan1: trip-point4 {
+					temperature = <75000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss3_fan2: trip-point5 {
+					temperature = <80000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+			};
+
+		};
+		gpuss-4-thermal {
+			polling-delay = <200>;
+			trips {
+				gpuss4_fan0: trip-point3 {
+					temperature = <70000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss4_fan1: trip-point4 {
+					temperature = <75000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss4_fan2: trip-point5 {
+					temperature = <80000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+			};
+
+		};
+		gpuss-5-thermal {
+			polling-delay = <200>;
+			trips {
+				gpuss5_fan0: trip-point3 {
+					temperature = <70000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss5_fan1: trip-point4 {
+					temperature = <75000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss5_fan2: trip-point5 {
+					temperature = <80000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+			};
+
+		};
+		gpuss-6-thermal {
+			polling-delay = <200>;
+			trips {
+				gpuss6_fan0: trip-point3 {
+					temperature = <70000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss6_fan1: trip-point4 {
+					temperature = <75000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss6_fan2: trip-point5 {
+					temperature = <80000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+			};
+
+		};
+		gpuss-7-thermal {
+			polling-delay = <200>;
+			trips {
+				gpuss7_fan0: trip-point3 {
+					temperature = <70000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss7_fan1: trip-point4 {
+					temperature = <75000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+				gpuss7_fan2: trip-point5 {
+					temperature = <80000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+			};
+
+		};
+	};
+
+	vdd_fan_5v0: vdd-fan-5v0-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fan_5v0";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fan_pwr_active>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "  vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pwm_fan: pwm-fan {
+		compatible = "pwm-fan";
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&fan_pwm_active>, <&fan_int>;
+
+		fan-supply = <&vdd_fan_5v0>;
+		pwms = <&pm8550_pwm 3 40000>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <64 IRQ_TYPE_EDGE_FALLING>;
+
+		#cooling-cells = <2>;
+		cooling-levels = <0 30 45 60 70 90 120 150>;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en>, <&bt_default>, <&pmk8550_sleep_clk>;
+
+		wlan-enable-gpios = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s5g_0p85>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_s2g_0p85>;
+		vdddig-supply = <&vreg_s4e_0p95>;
+		vddrfa1p2-supply = <&vreg_s4g_1p25>;
+		vddrfa1p8-supply = <&vreg_s6g_1p86>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+/* DMIC 01 23 */
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+	vdd-micb-supply = <&vreg_l10b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob1>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l11-supply = <&vreg_s4g_1p25>;
+		vdd-l12-supply = <&vreg_s6g_1p86>;
+		vdd-l15-supply = <&vreg_s6g_1p86>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2720000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p1: ldo5 {
+			regulator-name = "vreg_l5b_3p1";
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_1p8: ldo7 {
+			regulator-name = "vreg_l7b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_1p8: ldo8 {
+			regulator-name = "vreg_l8b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p2: ldo11 {
+			regulator-name = "vreg_l11b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p8: ldo12 {
+			regulator-name = "vreg_l12b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p2: ldo14 {
+			regulator-name = "vreg_l14b_3p2";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_2p8: ldo16 {
+			regulator-name = "vreg_l16b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_l3c_0p9: ldo3 {
+			regulator-name = "vreg_l3c_0p9";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+
+		vreg_l1d_0p88: ldo1 {
+			regulator-name = "vreg_l1d_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s4e_0p95: smps4 {
+			regulator-name = "vreg_s4e_0p95";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5e_1p08: smps5 {
+			regulator-name = "vreg_s5e_1p08";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1e_0p88: ldo1 {
+			regulator-name = "vreg_l1e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2e_0p9: ldo2 {
+			regulator-name = "vreg_l2e_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s4e_0p95>;
+		vdd-l2-supply = <&vreg_s4e_0p95>;
+		vdd-l3-supply = <&vreg_s4e_0p95>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4f_0p5: smps4 {
+			regulator-name = "vreg_s4f_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_0p9: ldo1 {
+			regulator-name = "vreg_l1f_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_0p88: ldo2 {
+			regulator-name = "vreg_l2f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_0p88: ldo3 {
+			regulator-name = "vreg_l3f_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-5 {
+		compatible = "qcom,pm8550vs-rpmh-regulators";
+		qcom,pmic-id = "g";
+		vdd-l1-supply = <&vreg_s4g_1p25>;
+		vdd-l2-supply = <&vreg_s4g_1p25>;
+		vdd-l3-supply = <&vreg_s4g_1p25>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vreg_s1g_1p25: smps1 {
+			regulator-name = "vreg_s1g_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2g_0p85: smps2 {
+			regulator-name = "vreg_s2g_0p85";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s3g_0p8: smps3 {
+			regulator-name = "vreg_s3g_0p8";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4g_1p25: smps4 {
+			regulator-name = "vreg_s4g_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5g_0p85: smps5 {
+			regulator-name = "vreg_s5g_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1004000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6g_1p86: smps6 {
+			regulator-name = "vreg_s6g_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1g_1p2: ldo1 {
+			regulator-name = "vreg_l1g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3g_1p2: ldo3 {
+			regulator-name = "vreg_l3g_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&pm8550_gpios {
+	sdc2_card_det_n: sdc2-card-det-n-state {
+		pins = "gpio12";
+		function = "normal";
+		input-enable;
+		output-disable;
+		bias-pull-up;
+		power-source = <1>;
+	};
+
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+
+	fan_pwm_active: fan-pwm-active-state {
+		pins = "gpio9";
+		function = "func1";
+		output-low;
+		bias-disable;
+		power-source = <0>;
+		qcom,drive-strength = <3>; /* PMIC_GPIO_STRENGTH_LOW */
+	};
+};
+
+&pmk8550_gpios {
+	pmk8550_sleep_clk: sleep-clk-state {
+		pins = "gpio3";
+		function = "func1";
+		input-disable;
+		output-enable;
+		bias-disable;
+		power-source = <0>;
+	};
+};
+
+&pm8550b_eusb2_repeater {
+	vdd18-supply = <&vreg_l15b_1p8>;
+	vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&pmk8550_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+};
+
+&pmk8550_sdam_2 {
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+
+	/* AYANEO Controller serial interface */
+	uart11: serial@88c000 {
+		compatible = "qcom,geni-uart";
+		reg = <0 0x0088c000 0 0x4000>;
+		clock-names = "se";
+		clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&qup_uart11_default>;
+		interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
+		interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+				 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+				<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+				 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
+		interconnect-names = "qup-core", "qup-config";
+		operating-points-v2 = <&qup_opp_table_100mhz>;
+		power-domains = <&rpmhpd RPMHPD_CX>;
+		status = "okay";
+	};
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/ayaneo/adsp.mdt",
+			"qcom/sm8550/ayaneo/adsp_dtb.mdt";
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l8b_1p8>;
+	no-sdio;
+	no-mmc;
+
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+
+	qcom,dll-config = <0x0007442c>;
+	sdhci-caps-mask = <0x3 0x0>;
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32764>;
+};
+
+&swr0 {
+	status = "okay";
+
+	spk_amp_l: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+
+		pinctrl-0 = <&spkr_1_sd_n_active>;
+		pinctrl-names = "default";
+
+		powerdown-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+		vdd-1p8-supply = <&vreg_l10b_1p8>;
+		vdd-io-supply = <&vreg_l10b_1p8>;
+
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	spk_amp_r: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+
+		pinctrl-0 = <&spkr_2_sd_n_active>;
+		pinctrl-names = "default";
+
+		powerdown-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+
+		vdd-1p8-supply = <&vreg_l10b_1p8>;
+		vdd-io-supply = <&vreg_l10b_1p8>;
+
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 8>;
+
+	bt_default: bt-default-state {
+		bt-en-pins {
+			pins = "gpio81";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		sw-ctrl-pins {
+			pins = "gpio82";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	fan_pwr_active: fan-pwr-active-state {
+		pins = "gpio31";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	fan_int: fan-int-state {
+		pins = "gpio64";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	upd720201_active: upd720201-active-state {
+		pins = "gpio10",  "gpio13", "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-high;
+	};
+
+	gamepad_pwr_en: gamepad-pwr-en-active-state {
+		pins = "gpio52";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	qup_uart11_default: qup-uart11-default-state {
+		/* TX, RX */
+		pins = "gpio70", "gpio71";
+		function = "qup2_se3";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sde_dsi_active: sde-dsi-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
+	};
+
+	sde_dsi_suspend: sde-dsi-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_active: sde-te-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	sde_te_suspend: sde-te-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio80";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+
+	spkr_1_sd_n_active: spkr-1-sd-n-active-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-high;
+	};
+
+	spkr_2_sd_n_active: spkr-2-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-high;
+	};
+};
+
+&pm8550_pwm {
+	status = "okay";
+};
+
+&xo_board {
+	clock-frequency = <76800000>;
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		firmware-name = "qcom/sm8550/a740_zap.mbn";
+	};
+};
+
+&gpu_opp_table {
+	/* Additional speedbin for Adreno A32
+	 *	719000000  RPMH_REGULATOR_LEVEL_SVS_L2
+	 *	746000000 RPMH_REGULATOR_LEVEL_NOM
+	 *	794000000 RPMH_REGULATOR_LEVEL_NOM_L1
+	 *	827000000 RPMH_REGULATOR_LEVEL_TURBO
+	 *	860000000 RPMH_REGULATOR_LEVEL_TURBO_L1
+	 *	1000000000 RPMH_REGULATOR_LEVEL_TURBO_L2
+	 */
+	opp-719000000 {
+		opp-hz = /bits/ 64 <719000000>;
+		opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+		opp-peak-kBps = <10687500>; // Level 7
+		qcom,opp-acd-level = <0x882e5ffd>;
+	};
+
+	opp-746000000 {
+		opp-hz = /bits/ 64 <746000000>;
+		opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+		opp-peak-kBps = <10687500>; // Level 7
+		qcom,opp-acd-level = <0x882e5ffd>;
+	};
+
+	opp-794000000 {
+		opp-hz = /bits/ 64 <794000000>;
+		opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+		opp-peak-kBps = <14398438>; // Level 8
+		qcom,opp-acd-level = <0xa82d5ffd>;
+	};
+
+	opp-827000000 {
+		opp-hz = /bits/ 64 <827000000>;
+		opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+		opp-peak-kBps = <16500000>; // Level 9
+		qcom,opp-acd-level = <0xa82d5ffd>;
+	};
+
+	opp-860000000 {
+		opp-hz = /bits/ 64 <860000000>;
+		opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+		opp-peak-kBps = <16500000>; // Level 9
+		qcom,opp-acd-level = <0x882d5ffd>;
+	};
+
+	opp-1000000000 {
+		opp-hz = /bits/ 64 <1000000000>;
+		opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L2>;
+		opp-peak-kBps = <16500000>; // Level 9
+		qcom,opp-acd-level = <0x882d5ffd>;
+	};
+};
+
+&i2c_master_hub_0 {
+	status = "okay";
+};
+
+&i2c_hub_2 {
+	status = "okay";
+
+	typec-retimer@1c {
+		compatible = "onnn,nb7vpq904m";
+		reg = <0x1c>;
+		vcc-supply = <&vreg_l15b_1p8>;
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				redriver_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				redriver_ss_in: endpoint {
+					data-lanes = <3 2 1 0>;
+					remote-endpoint = <&usb_dp_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&vreg_l3e_1p2>;
+	status = "okay";
+
+	display_panel: panel@0 {
+		reg = <0>;
+
+		pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>;
+		pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>;
+		pinctrl-names = "default", "sleep";
+	};
+};
+
+&mdss_dsi0_phy {
+	vdds-supply = <&vreg_l1e_0p88>;
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+};
+
+&pcie0 {
+	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+
+	max-link-speed = <2>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1 {
+	wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_default_state>, <&upd720201_active>, <&gamepad_pwr_en>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l3c_0p9>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+	vdda-qref-supply = <&vreg_l1e_0p88>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17b_2p5>;
+	vcc-max-microamp = <1300000>;
+	vccq-supply = <&vreg_l1g_1p2>;
+	vccq-max-microamp = <1200000>;
+	vdd-hba-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l1d_0p88>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1e_0p88>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&pm8550b_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3f_0p88>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&redriver_ss_in>;
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&iris {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketds.dts b/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketds.dts
new file mode 100644
index 000000000000..723b027fa73b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-ayaneo-pocketds.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Teguh Sobirin.
+ * Copyright (c) 2025, ROCKNIX (https://github.com/ROCKNIX)
+ */
+
+/dts-v1/;
+
+#include "qcs8550-ayaneo-pocket-common.dtsi"
+
+/ {
+	model = "AYANEO Pocket DS";
+	compatible = "ayaneo,pocketds", "qcom,sm8550";
+	rocknix-u-boot-dt-id = "u-boot-pocket-ds";
+
+	tca6424_vcc: regulator-tca6424-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "tca6424_vcc";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 168 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_ts: vdd-ts {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ts_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&tca6408 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 4>;
+	panel_pwr_active: panel-pwr-active-state {
+		pins = "gpio152", "gpio153";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
+	};
+
+	sde_dsi1_active: sde-dsi1-active-state {
+		pins = "gpio137";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+		output-high;
+	};
+
+	sde_dsi1_suspend: sde-dsi1-suspend-state {
+		pins = "gpio137";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	ts_rst_default: ts-rst-default-state {
+		pins = "gpio24";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	ts_rst_sleep: ts-rst-sleep-state {
+		pins = "gpio24";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio25";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	ts_int_sleep: ts-int-sleep-state {
+		pins = "gpio25";
+		function = "gpio";
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+
+	ts2_irq: ts2-irq-state {
+		pins = "gpio39";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	ts2_reset: ts2-reset-state {
+		pins = "gpio38";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tca6408: tca64_20@20 {
+		gpio-controller;
+		compatible = "ti,tca6408";
+		status = "okay";
+		reg = <0x20>;
+		#gpio-cells = <0x02>;
+		vcc-supply = <&tca6424_vcc>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@5d {
+		reg = <0x5d>;
+		compatible = "goodix,gt911";
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <39 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+		irq-gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
+		VDDIO-supply = <&vdd_ts>;
+
+		touchscreen-size-x = <768>;
+		touchscreen-size-y = <1024>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts2_reset>, <&ts2_irq>;
+
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+	touchscreen: touchscreen@38 {
+		compatible = "focaltech,ft5426";
+		reg = <0x38>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+
+		vcc-supply = <&vreg_l14b_3p2>;
+		iovcc-supply = <&vreg_l12b_1p8>;
+
+		pinctrl-0 = <&ts_int_default &ts_rst_default>;
+		pinctrl-1 = <&ts_int_sleep &ts_rst_sleep>;
+		pinctrl-names = "default", "sleep";
+
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+	};
+};

-- 
2.54.0



^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2026-05-10 16:06 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-05-10 16:05 [PATCH 0/2] arm64: qcom: add Ayaneo Pocket DS gaming console Alexandre Hamamdjian via B4 Relay
2026-05-10 16:05 ` [PATCH 1/2] dt-bindings: arm: qcom: document the Ayaneo Pocket DS Alexandre Hamamdjian via B4 Relay
2026-05-10 16:05 ` [PATCH 2/2] arm64: dts: qcom: add basic devicetree for Ayaneo Pocket DS gaming console Alexandre Hamamdjian via B4 Relay

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox