[PATCH v7 09/11] iio: adc: hx711: localize loop iterators in hx711_read

[Piyush Patle <piyushpatle228@gmail.com>]

Tighten the scope of the loop variables in hx711_read() now that
trailing-pulse selection is already handled by the callers.

Also replace the 24-bit loop bound with a named constant while touching
the same code.

Suggested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
---
 drivers/iio/adc/hx711.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/adc/hx711.c b/drivers/iio/adc/hx711.c
index 8da39d2801cd..9f17cbc6c2e5 100644
--- a/drivers/iio/adc/hx711.c
+++ b/drivers/iio/adc/hx711.c
@@ -23,6 +23,8 @@
 #include <linux/gpio/consumer.h>
 #include <linux/regulator/consumer.h>
 
+#define HX711_DATA_BITS		24
+
 /* gain to pulse and scale conversion */
 #define HX711_GAIN_MAX		3
 #define HX711_RESET_GAIN	128
@@ -157,16 +159,16 @@ static int hx711_cycle(struct hx711_data *hx711_data)
 
 static int hx711_read(struct hx711_data *hx711_data, int trailing_pulses)
 {
-	int i, ret;
 	int value = 0;
 	int val;
+	int ret;
 
 	/* we double check if it's really down */
 	val = gpiod_get_value(hx711_data->gpiod_dout);
 	if (val)
 		return -EIO;
 
-	for (i = 0; i < 24; i++) {
+	for (int i = 0; i < HX711_DATA_BITS; i++) {
 		value <<= 1;
 		ret = hx711_cycle(hx711_data);
 		if (ret)
@@ -175,7 +177,7 @@ static int hx711_read(struct hx711_data *hx711_data, int trailing_pulses)
 
 	value ^= 0x800000;
 
-	for (i = 0; i < trailing_pulses; i++)
+	for (int i = 0; i < trailing_pulses; i++)
 		hx711_cycle(hx711_data);
 
 	return value;
-- 
2.43.0