[PATCH v1 0/5] gpu/drm: tegra: add DSI support for Tegra20/Tegra30

[PATCH v1 0/5] gpu/drm: tegra: add DSI support for Tegra20/Tegra30

[Svyatoslav Ryhel]

Tegra20/Tegra30 DSI is quite similar to Tegra114+ apart MIPI calibration
logic and clocks. With a few minor tweaks, existing tegra DSI driver
should work on Tegra20/Tegra30 devices just fine. Tested on
Motorola Atrix 4G (T20) and ASUS VivoTab RT TF600T (T30).

Svyatoslav Ryhel (5):
  dt-bindings: display: tegra: document MIPI calibration for
    Tegra20/Tegra30
  clk: tegra20: reparent dsi clock to pll_d_out0
  gpu/drm: host1x: mipi: add Tegra20/Tegra30 MIPI calibration logic
  gpu/drm: tegra: dsi: add support for Tegra20/Tegra30
  ARM: tegra: add MIPI calibration binding for Tegra20/Tegra30

 .../display/tegra/nvidia,tegra114-mipi.yaml   | 41 ++++++++--
 arch/arm/boot/dts/nvidia/tegra20.dtsi         | 14 ++++
 arch/arm/boot/dts/nvidia/tegra30.dtsi         | 18 ++++
 drivers/clk/tegra/clk-tegra20.c               |  5 +-
 drivers/gpu/drm/tegra/drm.c                   |  2 +
 drivers/gpu/drm/tegra/dsi.c                   | 69 ++++++++++------
 drivers/gpu/drm/tegra/dsi.h                   | 10 +++
 drivers/gpu/host1x/mipi.c                     | 82 +++++++++++++++++++
 8 files changed, 206 insertions(+), 35 deletions(-)

-- 
2.48.1

[PATCH v1 1/5] dt-bindings: display: tegra: document MIPI calibration for Tegra20/Tegra30

[Svyatoslav Ryhel]

Adjust Tegra114 MIPI calibration schema to include Tegra20/Tegra30 MIPI
calibration logic.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 .../display/tegra/nvidia,tegra114-mipi.yaml   | 41 ++++++++++++++++---
 1 file changed, 36 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
index 193ddb105283..ddf1b9fff085 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
@@ -16,6 +16,8 @@ properties:
 
   compatible:
     enum:
+      - nvidia,tegra20-mipi
+      - nvidia,tegra30-mipi
       - nvidia,tegra114-mipi
       - nvidia,tegra124-mipi
       - nvidia,tegra210-mipi
@@ -25,12 +27,12 @@ properties:
     maxItems: 1
 
   clocks:
-    items:
-      - description: module clock
+    minItems: 1
+    maxItems: 2
 
   clock-names:
-    items:
-      - const: mipi-cal
+    minItems: 1
+    maxItems: 2
 
   power-domains:
     maxItems: 1
@@ -42,7 +44,36 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     const: 1
 
-additionalProperties: false
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-dsi
+              - nvidia,tegra30-dsi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: VI module clock
+            - description: CSI module clock
+
+        clock-names:
+          items:
+            - const: vi
+            - const: csi
+    else:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+
+        clock-names:
+          items:
+            - const: mipi-cal
+
+unevaluatedProperties: false
 
 required:
   - compatible
-- 
2.48.1

Re: [PATCH v1 1/5] dt-bindings: display: tegra: document MIPI calibration for Tegra20/Tegra30

[Svyatoslav Ryhel]

пн, 11 трав. 2026 р. о 10:48 Svyatoslav Ryhel <clamor95@gmail.com> пише:
>
> Adjust Tegra114 MIPI calibration schema to include Tegra20/Tegra30 MIPI
> calibration logic.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
>  .../display/tegra/nvidia,tegra114-mipi.yaml   | 41 ++++++++++++++++---
>  1 file changed, 36 insertions(+), 5 deletions(-)
>

Please ignore this. This patch was send by mistake. Sorry for inconvenience.

[PATCH v1 2/5] clk: tegra20: reparent dsi clock to pll_d_out0

[Svyatoslav Ryhel]

Reparent DSI clock to PLLD_OUT0 instead of directly descend from PLLD.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/clk/tegra/clk-tegra20.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index 2c58ce25af75..551ef0cf0c9a 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -802,9 +802,8 @@ static void __init tegra20_periph_clk_init(void)
 	clks[TEGRA20_CLK_MC] = clk;
 
 	/* dsi */
-	clk = tegra_clk_register_periph_gate("dsi", "pll_d", 0, clk_base, 0,
-				    48, periph_clk_enb_refcnt);
-	clk_register_clkdev(clk, NULL, "dsi");
+	clk = tegra_clk_register_periph_gate("dsi", "pll_d_out0", 0, clk_base,
+				    0, 48, periph_clk_enb_refcnt);
 	clks[TEGRA20_CLK_DSI] = clk;
 
 	/* pex */
-- 
2.48.1

Re: [PATCH v1 2/5] clk: tegra20: reparent dsi clock to pll_d_out0

[Svyatoslav Ryhel]

пн, 11 трав. 2026 р. о 10:48 Svyatoslav Ryhel <clamor95@gmail.com> пише:
>
> Reparent DSI clock to PLLD_OUT0 instead of directly descend from PLLD.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
>  drivers/clk/tegra/clk-tegra20.c | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
>

Please ignore this. This patch was send by mistake. Sorry for inconvenience.

[PATCH v1 3/5] gpu/drm: host1x: mipi: add Tegra20/Tegra30 MIPI calibration logic

[Svyatoslav Ryhel]

Tegra20/Tegra30 have no dedicated MIPI calibration device and calibration
registers are incorporated into CSI. Lets reuse Tegra114 calibration
framework and add Tegra20/Tegra30 as a special case.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/gpu/host1x/mipi.c | 82 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/drivers/gpu/host1x/mipi.c b/drivers/gpu/host1x/mipi.c
index e51b43dd15a3..cfaa27e0f892 100644
--- a/drivers/gpu/host1x/mipi.c
+++ b/drivers/gpu/host1x/mipi.c
@@ -61,6 +61,13 @@
 #define MIPI_CAL_CONFIG_DSID_CLK	0x1d
 #define MIPI_CAL_CONFIG_CSIE_CLK	0x1d
 
+/* DSI V0 controller */
+#define CSI_CIL_PAD_CONFIG		0x09
+#define CSI_CILA_MIPI_CAL_CONFIG	0x0a
+#define CSI_CILB_MIPI_CAL_CONFIG	0x0b
+#define CSI_DSI_MIPI_CAL_CONFIG		0x14
+#define CSI_MIPIBIAS_PAD_CONFIG		0x15
+
 /* for data and clock lanes */
 #define MIPI_CAL_CONFIG_SELECT		(1 << 21)
 
@@ -92,6 +99,8 @@ struct tegra_mipi_pad {
 };
 
 struct tegra_mipi_soc {
+	bool dsi_v0;
+
 	bool has_clk_lane;
 	const struct tegra_mipi_pad *pads;
 	unsigned int num_pads;
@@ -122,6 +131,7 @@ struct tegra_mipi {
 	void __iomem *regs;
 	struct mutex lock;
 	struct clk *clk;
+	struct clk *csi_clk;
 
 	unsigned long usage_count;
 };
@@ -265,6 +275,9 @@ int tegra_mipi_enable(struct tegra_mipi_device *dev)
 {
 	int err = 0;
 
+	if (dev->mipi->soc->dsi_v0)
+		return 0;
+
 	mutex_lock(&dev->mipi->lock);
 
 	if (dev->mipi->usage_count++ == 0)
@@ -281,6 +294,9 @@ int tegra_mipi_disable(struct tegra_mipi_device *dev)
 {
 	int err = 0;
 
+	if (dev->mipi->soc->dsi_v0)
+		return 0;
+
 	mutex_lock(&dev->mipi->lock);
 
 	if (--dev->mipi->usage_count == 0)
@@ -300,6 +316,9 @@ int tegra_mipi_finish_calibration(struct tegra_mipi_device *device)
 	u32 value;
 	int err;
 
+	if (mipi->soc->dsi_v0)
+		return 0;
+
 	err = readl_relaxed_poll_timeout(status_reg, value,
 					 !(value & MIPI_CAL_STATUS_ACTIVE) &&
 					 (value & MIPI_CAL_STATUS_DONE), 50,
@@ -311,6 +330,43 @@ int tegra_mipi_finish_calibration(struct tegra_mipi_device *device)
 }
 EXPORT_SYMBOL(tegra_mipi_finish_calibration);
 
+static int tegra20_mipi_calibration(struct tegra_mipi_device *device)
+{
+	struct tegra_mipi *mipi = device->mipi;
+	const struct tegra_mipi_soc *soc = mipi->soc;
+	u32 value;
+	int err;
+
+	err = clk_enable(mipi->csi_clk);
+	if (err < 0)
+		return err;
+
+	mutex_lock(&mipi->lock);
+
+	value = MIPI_CAL_CONFIG_TERMOS(soc->termos);
+	tegra_mipi_writel(mipi, value, CSI_CILA_MIPI_CAL_CONFIG);
+
+	value = MIPI_CAL_CONFIG_TERMOS(soc->termos);
+	tegra_mipi_writel(mipi, value, CSI_CILB_MIPI_CAL_CONFIG);
+
+	value = MIPI_CAL_CONFIG_HSPDOS(soc->hspdos) |
+		MIPI_CAL_CONFIG_HSPUOS(soc->hspuos);
+	tegra_mipi_writel(mipi, value, CSI_DSI_MIPI_CAL_CONFIG);
+
+	value = MIPI_CAL_BIAS_PAD_DRV_DN_REF(soc->pad_drive_down_ref) |
+		MIPI_CAL_BIAS_PAD_DRV_UP_REF(soc->pad_drive_up_ref);
+	tegra_mipi_writel(mipi, value, CSI_MIPIBIAS_PAD_CONFIG);
+
+	tegra_mipi_writel(mipi, 0x0, CSI_CIL_PAD_CONFIG);
+
+	mutex_unlock(&mipi->lock);
+
+	clk_disable(mipi->csi_clk);
+	clk_disable(mipi->clk);
+
+	return 0;
+}
+
 int tegra_mipi_start_calibration(struct tegra_mipi_device *device)
 {
 	const struct tegra_mipi_soc *soc = device->mipi->soc;
@@ -322,6 +378,9 @@ int tegra_mipi_start_calibration(struct tegra_mipi_device *device)
 	if (err < 0)
 		return err;
 
+	if (soc->dsi_v0)
+		return tegra20_mipi_calibration(device);
+
 	mutex_lock(&device->mipi->lock);
 
 	value = MIPI_CAL_BIAS_PAD_DRV_DN_REF(soc->pad_drive_down_ref) |
@@ -386,6 +445,15 @@ int tegra_mipi_start_calibration(struct tegra_mipi_device *device)
 }
 EXPORT_SYMBOL(tegra_mipi_start_calibration);
 
+static const struct tegra_mipi_soc tegra20_mipi_soc = {
+	.dsi_v0 = true,
+	.pad_drive_down_ref = 0x5,
+	.pad_drive_up_ref = 0x7,
+	.hspdos = 0x4,
+	.hspuos = 0x3,
+	.termos = 0x4,
+};
+
 static const struct tegra_mipi_pad tegra114_mipi_pads[] = {
 	{ .data = MIPI_CAL_CONFIG_CSIA },
 	{ .data = MIPI_CAL_CONFIG_CSIB },
@@ -399,6 +467,7 @@ static const struct tegra_mipi_pad tegra114_mipi_pads[] = {
 };
 
 static const struct tegra_mipi_soc tegra114_mipi_soc = {
+	.dsi_v0 = false,
 	.has_clk_lane = false,
 	.pads = tegra114_mipi_pads,
 	.num_pads = ARRAY_SIZE(tegra114_mipi_pads),
@@ -426,6 +495,7 @@ static const struct tegra_mipi_pad tegra124_mipi_pads[] = {
 };
 
 static const struct tegra_mipi_soc tegra124_mipi_soc = {
+	.dsi_v0 = false,
 	.has_clk_lane = true,
 	.pads = tegra124_mipi_pads,
 	.num_pads = ARRAY_SIZE(tegra124_mipi_pads),
@@ -443,6 +513,7 @@ static const struct tegra_mipi_soc tegra124_mipi_soc = {
 };
 
 static const struct tegra_mipi_soc tegra132_mipi_soc = {
+	.dsi_v0 = false,
 	.has_clk_lane = true,
 	.pads = tegra124_mipi_pads,
 	.num_pads = ARRAY_SIZE(tegra124_mipi_pads),
@@ -473,6 +544,7 @@ static const struct tegra_mipi_pad tegra210_mipi_pads[] = {
 };
 
 static const struct tegra_mipi_soc tegra210_mipi_soc = {
+	.dsi_v0 = false,
 	.has_clk_lane = true,
 	.pads = tegra210_mipi_pads,
 	.num_pads = ARRAY_SIZE(tegra210_mipi_pads),
@@ -490,6 +562,8 @@ static const struct tegra_mipi_soc tegra210_mipi_soc = {
 };
 
 static const struct of_device_id tegra_mipi_of_match[] = {
+	{ .compatible = "nvidia,tegra20-mipi", .data = &tegra20_mipi_soc },
+	{ .compatible = "nvidia,tegra30-mipi", .data = &tegra20_mipi_soc },
 	{ .compatible = "nvidia,tegra114-mipi", .data = &tegra114_mipi_soc },
 	{ .compatible = "nvidia,tegra124-mipi", .data = &tegra124_mipi_soc },
 	{ .compatible = "nvidia,tegra132-mipi", .data = &tegra132_mipi_soc },
@@ -525,6 +599,14 @@ static int tegra_mipi_probe(struct platform_device *pdev)
 		return PTR_ERR(mipi->clk);
 	}
 
+	if (mipi->soc->dsi_v0) {
+		mipi->csi_clk = devm_clk_get_prepared(&pdev->dev, "csi");
+		if (IS_ERR(mipi->csi_clk)) {
+			dev_err(&pdev->dev, "failed to get CSI clock\n");
+			return PTR_ERR(mipi->csi_clk);
+		}
+	}
+
 	platform_set_drvdata(pdev, mipi);
 
 	return 0;
-- 
2.48.1

Re: [PATCH v1 3/5] gpu/drm: host1x: mipi: add Tegra20/Tegra30 MIPI calibration logic

[Svyatoslav Ryhel]

пн, 11 трав. 2026 р. о 10:48 Svyatoslav Ryhel <clamor95@gmail.com> пише:
>
> Tegra20/Tegra30 have no dedicated MIPI calibration device and calibration
> registers are incorporated into CSI. Lets reuse Tegra114 calibration
> framework and add Tegra20/Tegra30 as a special case.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
>  drivers/gpu/host1x/mipi.c | 82 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 82 insertions(+)
>

Please ignore this. This patch was send by mistake. Sorry for inconvenience.

[PATCH v1 4/5] gpu/drm: tegra: dsi: add support for Tegra20/Tegra30

[Svyatoslav Ryhel]

Tegra20/Tegra30 are fully compatible with existing tegra DSI driver apart
clock configuration and MIPI calibration which are addressed by this patch.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 drivers/gpu/drm/tegra/drm.c |  2 ++
 drivers/gpu/drm/tegra/dsi.c | 69 ++++++++++++++++++++++---------------
 drivers/gpu/drm/tegra/dsi.h | 10 ++++++
 3 files changed, 54 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c
index 4596073fe28f..5d64cd57e764 100644
--- a/drivers/gpu/drm/tegra/drm.c
+++ b/drivers/gpu/drm/tegra/drm.c
@@ -1359,10 +1359,12 @@ static SIMPLE_DEV_PM_OPS(host1x_drm_pm_ops, host1x_drm_suspend,
 
 static const struct of_device_id host1x_drm_subdevs[] = {
 	{ .compatible = "nvidia,tegra20-dc", },
+	{ .compatible = "nvidia,tegra20-dsi", },
 	{ .compatible = "nvidia,tegra20-hdmi", },
 	{ .compatible = "nvidia,tegra20-gr2d", },
 	{ .compatible = "nvidia,tegra20-gr3d", },
 	{ .compatible = "nvidia,tegra30-dc", },
+	{ .compatible = "nvidia,tegra30-dsi", },
 	{ .compatible = "nvidia,tegra30-hdmi", },
 	{ .compatible = "nvidia,tegra30-gr2d", },
 	{ .compatible = "nvidia,tegra30-gr3d", },
diff --git a/drivers/gpu/drm/tegra/dsi.c b/drivers/gpu/drm/tegra/dsi.c
index 3f91a24ebef2..85bcb8bee1ae 100644
--- a/drivers/gpu/drm/tegra/dsi.c
+++ b/drivers/gpu/drm/tegra/dsi.c
@@ -662,39 +662,48 @@ static int tegra_dsi_pad_enable(struct tegra_dsi *dsi)
 {
 	u32 value;
 
-	value = DSI_PAD_CONTROL_VS1_PULLDN(0) | DSI_PAD_CONTROL_VS1_PDIO(0);
-	tegra_dsi_writel(dsi, value, DSI_PAD_CONTROL_0);
+	/* Tegra20/30 uses DSIv0 while Tegra114+ uses DSIv1 */
+	if (of_device_is_compatible(dsi->dev->of_node, "nvidia,tegra20-dsi") ||
+	    of_device_is_compatible(dsi->dev->of_node, "nvidia,tegra30-dsi")) {
+		value = DSI_PAD_CONTROL_LPUPADJ(0x1) | DSI_PAD_CONTROL_LPDNADJ(0x1) |
+			DSI_PAD_CONTROL_PREEMP_EN(0x1) | DSI_PAD_CONTROL_SLEWDNADJ(0x6) |
+			DSI_PAD_CONTROL_SLEWUPADJ(0x6) | DSI_PAD_CONTROL_PDIO(0) |
+			DSI_PAD_CONTROL_PDIO_CLK(0) | DSI_PAD_CONTROL_PULLDN_ENAB(0);
+		tegra_dsi_writel(dsi, value, DSI_PAD_CONTROL_0);
+	} else {
+		/*
+		 * XXX Is this still needed? The module reset is deasserted right
+		 * before this function is called.
+		 */
+		tegra_dsi_writel(dsi, 0, DSI_PAD_CONTROL_0);
+		tegra_dsi_writel(dsi, 0, DSI_PAD_CONTROL_1);
+		tegra_dsi_writel(dsi, 0, DSI_PAD_CONTROL_2);
+		tegra_dsi_writel(dsi, 0, DSI_PAD_CONTROL_3);
+		tegra_dsi_writel(dsi, 0, DSI_PAD_CONTROL_4);
+
+		value = DSI_PAD_CONTROL_VS1_PULLDN(0) | DSI_PAD_CONTROL_VS1_PDIO(0);
+		tegra_dsi_writel(dsi, value, DSI_PAD_CONTROL_0);
+
+		value = DSI_PAD_SLEW_UP(0x7) | DSI_PAD_SLEW_DN(0x7) |
+			DSI_PAD_LP_UP(0x1) | DSI_PAD_LP_DN(0x1) |
+			DSI_PAD_OUT_CLK(0x0);
+		tegra_dsi_writel(dsi, value, DSI_PAD_CONTROL_2);
+
+		value = DSI_PAD_PREEMP_PD_CLK(0x3) | DSI_PAD_PREEMP_PU_CLK(0x3) |
+			DSI_PAD_PREEMP_PD(0x03) | DSI_PAD_PREEMP_PU(0x3);
+		tegra_dsi_writel(dsi, value, DSI_PAD_CONTROL_3);
+	}
 
 	return 0;
 }
 
 static int tegra_dsi_pad_calibrate(struct tegra_dsi *dsi)
 {
-	u32 value;
 	int err;
 
-	/*
-	 * XXX Is this still needed? The module reset is deasserted right
-	 * before this function is called.
-	 */
-	tegra_dsi_writel(dsi, 0, DSI_PAD_CONTROL_0);
-	tegra_dsi_writel(dsi, 0, DSI_PAD_CONTROL_1);
-	tegra_dsi_writel(dsi, 0, DSI_PAD_CONTROL_2);
-	tegra_dsi_writel(dsi, 0, DSI_PAD_CONTROL_3);
-	tegra_dsi_writel(dsi, 0, DSI_PAD_CONTROL_4);
-
 	/* start calibration */
 	tegra_dsi_pad_enable(dsi);
 
-	value = DSI_PAD_SLEW_UP(0x7) | DSI_PAD_SLEW_DN(0x7) |
-		DSI_PAD_LP_UP(0x1) | DSI_PAD_LP_DN(0x1) |
-		DSI_PAD_OUT_CLK(0x0);
-	tegra_dsi_writel(dsi, value, DSI_PAD_CONTROL_2);
-
-	value = DSI_PAD_PREEMP_PD_CLK(0x3) | DSI_PAD_PREEMP_PU_CLK(0x3) |
-		DSI_PAD_PREEMP_PD(0x03) | DSI_PAD_PREEMP_PU(0x3);
-	tegra_dsi_writel(dsi, value, DSI_PAD_CONTROL_3);
-
 	err = tegra_mipi_start_calibration(dsi->mipi);
 	if (err < 0)
 		return err;
@@ -1615,7 +1624,7 @@ static int tegra_dsi_probe(struct platform_device *pdev)
 		goto remove;
 	}
 
-	dsi->clk_lp = devm_clk_get(&pdev->dev, "lp");
+	dsi->clk_lp = devm_clk_get_optional(&pdev->dev, "lp");
 	if (IS_ERR(dsi->clk_lp)) {
 		err = dev_err_probe(&pdev->dev, PTR_ERR(dsi->clk_lp),
 				    "cannot get low-power clock\n");
@@ -1636,10 +1645,14 @@ static int tegra_dsi_probe(struct platform_device *pdev)
 		goto remove;
 	}
 
-	err = tegra_dsi_setup_clocks(dsi);
-	if (err < 0) {
-		dev_err(&pdev->dev, "cannot setup clocks\n");
-		goto remove;
+	/* Tegra20/Tegra30 do not use DSI parent muxing */
+	if (!of_device_is_compatible(dsi->dev->of_node, "nvidia,tegra20-dsi") &&
+	    !of_device_is_compatible(dsi->dev->of_node, "nvidia,tegra30-dsi")) {
+		err = tegra_dsi_setup_clocks(dsi);
+		if (err < 0) {
+			dev_err(&pdev->dev, "cannot setup clocks\n");
+			return err;
+		}
 	}
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1709,6 +1722,8 @@ static const struct of_device_id tegra_dsi_of_match[] = {
 	{ .compatible = "nvidia,tegra132-dsi", },
 	{ .compatible = "nvidia,tegra124-dsi", },
 	{ .compatible = "nvidia,tegra114-dsi", },
+	{ .compatible = "nvidia,tegra30-dsi", },
+	{ .compatible = "nvidia,tegra20-dsi", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, tegra_dsi_of_match);
diff --git a/drivers/gpu/drm/tegra/dsi.h b/drivers/gpu/drm/tegra/dsi.h
index f39594e65e97..d834ac0c47ab 100644
--- a/drivers/gpu/drm/tegra/dsi.h
+++ b/drivers/gpu/drm/tegra/dsi.h
@@ -95,6 +95,16 @@
 #define DSI_TALLY_LRX(x)		(((x) & 0xff) <<  8)
 #define DSI_TALLY_HTX(x)		(((x) & 0xff) <<  0)
 #define DSI_PAD_CONTROL_0		0x4b
+/* Tegra20/Tegra30 */
+#define DSI_PAD_CONTROL_PULLDN_ENAB(x)	(((x) & 0x1) << 28)
+#define DSI_PAD_CONTROL_SLEWUPADJ(x)	(((x) & 0x7) << 24)
+#define DSI_PAD_CONTROL_SLEWDNADJ(x)	(((x) & 0x7) << 20)
+#define DSI_PAD_CONTROL_PREEMP_EN(x)	(((x) & 0x1) << 19)
+#define DSI_PAD_CONTROL_PDIO_CLK(x)	(((x) & 0x1) << 18)
+#define DSI_PAD_CONTROL_PDIO(x)		(((x) & 0x3) << 16)
+#define DSI_PAD_CONTROL_LPUPADJ(x)	(((x) & 0x3) << 14)
+#define DSI_PAD_CONTROL_LPDNADJ(x)	(((x) & 0x3) << 12)
+/* Tegra114+ */
 #define DSI_PAD_CONTROL_VS1_PDIO(x)	(((x) & 0xf) <<  0)
 #define DSI_PAD_CONTROL_VS1_PDIO_CLK	(1 <<  8)
 #define DSI_PAD_CONTROL_VS1_PULLDN(x)	(((x) & 0xf) << 16)
-- 
2.48.1

Re: [PATCH v1 4/5] gpu/drm: tegra: dsi: add support for Tegra20/Tegra30

[Svyatoslav Ryhel]

пн, 11 трав. 2026 р. о 10:48 Svyatoslav Ryhel <clamor95@gmail.com> пише:
>
> Tegra20/Tegra30 are fully compatible with existing tegra DSI driver apart
> clock configuration and MIPI calibration which are addressed by this patch.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
>  drivers/gpu/drm/tegra/drm.c |  2 ++
>  drivers/gpu/drm/tegra/dsi.c | 69 ++++++++++++++++++++++---------------
>  drivers/gpu/drm/tegra/dsi.h | 10 ++++++
>  3 files changed, 54 insertions(+), 27 deletions(-)
>

Please ignore this. This patch was send by mistake. Sorry for inconvenience.

Re: [PATCH v1 0/5] gpu/drm: tegra: add DSI support for Tegra20/Tegra30

[Svyatoslav Ryhel]

пн, 11 трав. 2026 р. о 10:48 Svyatoslav Ryhel <clamor95@gmail.com> пише:
>
> Tegra20/Tegra30 DSI is quite similar to Tegra114+ apart MIPI calibration
> logic and clocks. With a few minor tweaks, existing tegra DSI driver
> should work on Tegra20/Tegra30 devices just fine. Tested on
> Motorola Atrix 4G (T20) and ASUS VivoTab RT TF600T (T30).
>
> Svyatoslav Ryhel (5):
>   dt-bindings: display: tegra: document MIPI calibration for
>     Tegra20/Tegra30
>   clk: tegra20: reparent dsi clock to pll_d_out0
>   gpu/drm: host1x: mipi: add Tegra20/Tegra30 MIPI calibration logic
>   gpu/drm: tegra: dsi: add support for Tegra20/Tegra30
>   ARM: tegra: add MIPI calibration binding for Tegra20/Tegra30
>
>  .../display/tegra/nvidia,tegra114-mipi.yaml   | 41 ++++++++--
>  arch/arm/boot/dts/nvidia/tegra20.dtsi         | 14 ++++
>  arch/arm/boot/dts/nvidia/tegra30.dtsi         | 18 ++++
>  drivers/clk/tegra/clk-tegra20.c               |  5 +-
>  drivers/gpu/drm/tegra/drm.c                   |  2 +
>  drivers/gpu/drm/tegra/dsi.c                   | 69 ++++++++++------
>  drivers/gpu/drm/tegra/dsi.h                   | 10 +++
>  drivers/gpu/host1x/mipi.c                     | 82 +++++++++++++++++++
>  8 files changed, 206 insertions(+), 35 deletions(-)
>
> --
> 2.48.1
>

Please ignore this. This patch was send by mistake. Sorry for inconvenience.