[PATCH v4 0/2] arm64: dts: qcom: pixel 3a xl support with tianma panel

[PATCH v4 0/2] arm64: dts: qcom: pixel 3a xl support with tianma panel

[Richard Acayan]

This expands Pixel 3a support to the Pixel 3a XL, starting with one of
the panel variants. The Pixel 3a XL has two variants with panels from
Samsung or from Tianma/Novatek.

This series depends on the IMX355 front camera devicetree patches
(https://lore.kernel.org/r/20260217002738.133534-1-mailingradian@gmail.com).

The most recent test on a Pixel 3a XL is in v3. v4 is still
compile-tested (with relevant schema) and tested on a Pixel 3a.

Changes since v3 (https://lore.kernel.org/r/20260310002606.16413-1-mailingradian@gmail.com):
- disclose AI involvement in review (Konrad's review tags retained) (1-2/2)

	Some changes appeared in v3 (under "Changes since v2") which
	were suggested by the "Claude Code Review Bot", an experimental
	AI reviewer deployed by a DRM maintainer:

	- preserve same touchscreen physical width in sargo (1/2)
	- move entry in Makefile to correct place (2/2)
	- correct top-of-file comment about which panel is supported (2/2)
	- explain license identifier change from GPL-2.0 to GPL-2.0-only (1/2)

	The AI involvement already occurred between v2 and v3. The full
	AI-generated output is accessible at:

	https://lore.gitlab.freedesktop.org/drm-ai-reviews/20260217000854.131242-1-mailingradian@gmail.com/T/#u

- rebase onto new front camera patches
- drop applied patches (previously 1-3/5)
- add review tags (1/2)

Changes since v2 (https://lore.kernel.org/r/20260217000854.131242-1-mailingradian@gmail.com):
- add support for regulator (Dmitry's review retained) (3/5)
- use common set page function (Dmitry's review retained) (3/5)
- squash new labels into common dtsi patch (review tags dropped) (4/5)
- specify framebuffer in terms of memory region (4/5)
- only specify height in XL/non-XL specific devicetrees (4/5, 5/5)
- remove status in display devices (4/5, 5/5)
- preserve same touchscreen physical width in sargo (4/5)
- move entry in Makefile to correct place (5/5)
- omit copyright year in new file (4/5)
- correct top-of-file comment about which panel is supported (5/5)
- explain license identifier change from GPL-2.0 to GPL-2.0-only (4/5)
- add review tags (1/5, 3/5, 5/5)

Changes since v1 (https://lore.kernel.org/r/20260210023300.15785-1-mailingradian@gmail.com):
- use multi functions in disable callback (3/6)
- add and reformat comments about XL differences (5/6)
- mention the sdc panel (6/6)
- explain google,bonito compatible (1/6)
- remove TODO item in code (3/6)
- add review and testing tags (2/6, 3/6, 5/6)

Richard Acayan (2):
  arm64: dts: qcom: sdm670-google: add common device tree include
  arm64: dts: qcom: add support for pixel 3a xl with the tianma panel

 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../dts/qcom/sdm670-google-bonito-tianma.dts  |  32 +
 ...le-sargo.dts => sdm670-google-common.dtsi} |  22 +-
 .../boot/dts/qcom/sdm670-google-sargo.dts     | 714 +-----------------
 4 files changed, 53 insertions(+), 716 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sdm670-google-bonito-tianma.dts
 copy arch/arm64/boot/dts/qcom/{sdm670-google-sargo.dts => sdm670-google-common.dtsi} (97%)

-- 
2.54.0

[PATCH v4 1/2] arm64: dts: qcom: sdm670-google: add common device tree include

[Richard Acayan]

The Pixel 3a XL can be supported by reusing most of the device tree from
the Pixel 3a. Move the common elements to a common device tree include
like with other devices.

Since the original devicetree should only specify non-XL properties, it
needs to be completely rewritten. Also change the SPDX license
identifier from GPL-2.0 (which was deprecated as it can be
misinterpreted as GPLv2 or later) into GPL-2.0-only.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: "Claude Code Review Bot":claude-opus-4-6
---
 ...le-sargo.dts => sdm670-google-common.dtsi} |  22 +-
 .../boot/dts/qcom/sdm670-google-sargo.dts     | 714 +-----------------
 2 files changed, 20 insertions(+), 716 deletions(-)
 copy arch/arm64/boot/dts/qcom/{sdm670-google-sargo.dts => sdm670-google-common.dtsi} (97%)

diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi
similarity index 97%
copy from arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
copy to arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi
index eba2f3792dd0..0f57b915186b 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-common.dtsi
@@ -6,8 +6,6 @@
  * Copyright (c) 2022, Richard Acayan. All rights reserved.
  */
 
-/dts-v1/;
-
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
@@ -28,9 +26,6 @@
 /delete-node/ &gpu_mem;
 
 / {
-	model = "Google Pixel 3a";
-	compatible = "google,sargo", "qcom,sdm670";
-
 	aliases { };
 
 	battery: battery {
@@ -38,7 +33,6 @@ battery: battery {
 
 		voltage-min-design-microvolt = <3312000>;
 		voltage-max-design-microvolt = <4400000>;
-		charge-full-design-microamp-hours = <3000000>;
 	};
 
 	chosen {
@@ -48,11 +42,11 @@ chosen {
 		#size-cells = <2>;
 		ranges;
 
-		framebuffer@9c000000 {
+		framebuffer: framebuffer@9c000000 {
 			compatible = "simple-framebuffer";
-			reg = <0 0x9c000000 0 (1080 * 2220 * 4)>;
+			memory-region = <&fb_mem>;
 			width = <1080>;
-			height = <2220>;
+			/* height is in specific device trees */
 			stride = <(1080 * 4)>;
 			format = "a8r8g8b8";
 		};
@@ -121,7 +115,7 @@ gpu_mem: gpu@97a15000 {
 			no-map;
 		};
 
-		framebuffer-region@9c000000 {
+		fb_mem: framebuffer-region@9c000000 {
 			reg = <0 0x9c000000 0 0x2400000>;
 			no-map;
 		};
@@ -521,10 +515,8 @@ rmi4-f01@1 {
 			syna,nosleep-mode = <1>;
 		};
 
-		rmi4-f12@12 {
+		rmi4_f12: rmi4-f12@12 {
 			reg = <0x12>;
-			touchscreen-x-mm = <62>;
-			touchscreen-y-mm = <127>;
 			syna,sensor-type = <1>;
 		};
 	};
@@ -538,8 +530,8 @@ &mdss_dsi0 {
 	vdda-supply = <&vreg_l1a_1p225>;
 	status = "okay";
 
-	panel@0 {
-		compatible = "samsung,s6e3fa7-ams559nk06";
+	panel: panel@0 {
+		/* compatible is provided in specific device trees */
 		reg = <0>;
 
 		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
index eba2f3792dd0..c67a0396436b 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
@@ -1,720 +1,32 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Device tree for Google Pixel 3a, adapted from google-blueline device tree,
- * xiaomi-lavender device tree, and oneplus-common device tree.
+ * Device tree for Google Pixel 3a (non-XL).
  *
- * Copyright (c) 2022, Richard Acayan. All rights reserved.
+ * Copyright (c) Richard Acayan. All rights reserved.
  */
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include "sdm670.dtsi"
-#include "pm660.dtsi"
-#include "pm660l.dtsi"
-
-/delete-node/ &mpss_region;
-/delete-node/ &venus_mem;
-/delete-node/ &wlan_msa_mem;
-/delete-node/ &cdsp_mem;
-/delete-node/ &mba_region;
-/delete-node/ &adsp_mem;
-/delete-node/ &ipa_fw_mem;
-/delete-node/ &ipa_gsi_mem;
-/delete-node/ &gpu_mem;
+#include "sdm670-google-common.dtsi"
 
 / {
 	model = "Google Pixel 3a";
 	compatible = "google,sargo", "qcom,sdm670";
-
-	aliases { };
-
-	battery: battery {
-		compatible = "simple-battery";
-
-		voltage-min-design-microvolt = <3312000>;
-		voltage-max-design-microvolt = <4400000>;
-		charge-full-design-microamp-hours = <3000000>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		framebuffer@9c000000 {
-			compatible = "simple-framebuffer";
-			reg = <0 0x9c000000 0 (1080 * 2220 * 4)>;
-			width = <1080>;
-			height = <2220>;
-			stride = <(1080 * 4)>;
-			format = "a8r8g8b8";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&vol_up_pin>;
-
-		key-vol-up {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-
-		mpss_region: mpss@8b000000 {
-			reg = <0 0x8b000000 0 0x9800000>;
-			no-map;
-		};
-
-		venus_mem: venus@94800000 {
-			reg = <0 0x94800000 0 0x500000>;
-			no-map;
-		};
-
-		wlan_msa_mem: wlan-msa@94d00000 {
-			reg = <0 0x94d00000 0 0x100000>;
-			no-map;
-		};
-
-		cdsp_mem: cdsp@94e00000 {
-			reg = <0 0x94e00000 0 0x800000>;
-			no-map;
-		};
-
-		mba_region: mba@95600000 {
-			reg = <0 0x95600000 0 0x200000>;
-			no-map;
-		};
-
-		adsp_mem: adsp@95800000 {
-			reg = <0 0x95800000 0 0x2200000>;
-			no-map;
-		};
-
-		ipa_fw_mem: ipa-fw@97a00000 {
-			reg = <0 0x97a00000 0 0x10000>;
-			no-map;
-		};
-
-		ipa_gsi_mem: ipa-gsi@97a10000 {
-			reg = <0 0x97a10000 0 0x5000>;
-			no-map;
-		};
-
-		gpu_mem: gpu@97a15000 {
-			reg = <0 0x97a15000 0 0x2000>;
-			no-map;
-		};
-
-		framebuffer-region@9c000000 {
-			reg = <0 0x9c000000 0 0x2400000>;
-			no-map;
-		};
-
-		/* Also includes ramoops regions */
-		debug_info_mem: debug-info@a1800000 {
-			reg = <0 0xa1800000 0 0x411000>;
-			no-map;
-		};
-	};
-
-	/*
-	 * The touchscreen regulator seems to be controlled somehow by a gpio.
-	 * Model it as a fixed regulator and keep it on. Without schematics we
-	 * don't know how this is actually wired up...
-	 */
-	ts_1p8_supply: ts-1p8-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "ts_1p8_supply";
-
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&pm660_gpios 12 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <3312000>;
-		regulator-max-microvolt = <3312000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/*
-	 * Supply map from xiaomi-lavender specifies this as the supply for
-	 * ldob1, ldob9, ldob10, ldoa2, and ldoa3, while downstream specifies
-	 * this as a power domain. Set this as a fixed regulator with the same
-	 * voltage as lavender until display is needed to avoid unneccessarily
-	 * using a deprecated binding (regulator-fixed-domain).
-	 */
-	vreg_s2b_1p05: vreg-s2b-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_s2b";
-		regulator-min-microvolt = <1050000>;
-		regulator-max-microvolt = <1050000>;
-	};
-
-	cam_front_ldo: cam-front-ldo-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "cam_front_ldo";
-		regulator-min-microvolt = <1352000>;
-		regulator-max-microvolt = <1352000>;
-		regulator-enable-ramp-delay = <135>;
-
-		gpios = <&pm660l_gpios 4 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&cam_front_ldo_pin>;
-		pinctrl-names = "default";
-	};
-
-	cam_vio_ldo: cam-vio-ldo-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "cam_vio_ldo";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-enable-ramp-delay = <233>;
-
-		gpios = <&pm660_gpios 13 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&cam_vio_pin>;
-		pinctrl-names = "default";
-	};
-};
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pm660-rpmh-regulators";
-		qcom,pmic-id = "a";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-
-		vdd-l1-l6-l7-supply = <&vreg_s6a_0p87>;
-		vdd-l2-l3-supply = <&vreg_s2b_1p05>;
-		vdd-l5-supply = <&vreg_s2b_1p05>;
-		vdd-l8-l9-l10-l11-l12-l13-l14-supply = <&vreg_s4a_2p04>;
-		vdd-l15-l16-l17-l18-l19-supply = <&vreg_bob>;
-
-		/*
-		 * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed
-		 * by the Core Power Reduction hardened (CPRh) and the
-		 * Operating State Manager (OSM) HW automatically.
-		 */
-
-		vreg_s4a_2p04: smps4 {
-			regulator-min-microvolt = <1808000>;
-			regulator-max-microvolt = <2040000>;
-			regulator-enable-ramp-delay = <200>;
-		};
-
-		vreg_s6a_0p87: smps6 {
-			regulator-min-microvolt = <1224000>;
-			regulator-max-microvolt = <1352000>;
-			regulator-enable-ramp-delay = <150>;
-		};
-
-		/* LDOs */
-		vreg_l1a_1p225: ldo1 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1250000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l2a_1p0: ldo2 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l3a_1p0: ldo3 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l5a_0p848: ldo5 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l6a_1p3: ldo6 {
-			regulator-min-microvolt = <1248000>;
-			regulator-max-microvolt = <1304000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l7a_1p2: ldo7 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l8a_1p8: ldo8 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-enable-ramp-delay = <250>;
-			regulator-always-on;
-		};
-
-		vreg_l9a_1p8: ldo9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l10a_1p8: ldo10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l11a_1p8: ldo11 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l12a_1p8: ldo12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l13a_1p8: ldo13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l14a_1p8: ldo14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l15a_1p8: ldo15 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l16a_2p7: ldo16 {
-			regulator-min-microvolt = <2696000>;
-			regulator-max-microvolt = <2696000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l17a_1p8: ldo17 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l19a_3p3: ldo19 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3312000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pm660l-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-
-		vdd-l1-l9-l10-supply = <&vreg_s2b_1p05>;
-		vdd-l2-supply = <&vreg_bob>;
-		vdd-l3-l5-l7-l8-supply = <&vreg_bob>;
-		vdd-l4-l6-supply = <&vreg_bob>;
-		vdd-bob-supply = <&vph_pwr>;
-
-		/* LDOs */
-		vreg_l1b_0p925: ldo1 {
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <900000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l2b_2p95: ldo2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l3b_3p0: ldo3 {
-			regulator-min-microvolt = <2850000>;
-			regulator-max-microvolt = <3008000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l4b_2p95: ldo4 {
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l5b_2p95: ldo5 {
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l6b_3p3: ldo6 {
-			regulator-min-microvolt = <3008000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l7b_3p125: ldo7 {
-			regulator-min-microvolt = <3088000>;
-			regulator-max-microvolt = <3100000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		vreg_l8b_3p3: ldo8 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3312000>;
-			regulator-enable-ramp-delay = <250>;
-		};
-
-		/*
-		 * Downstream specifies a fixed voltage of 3.312 V, but the
-		 * PMIC4 BOB ranges don't support that. Widen the range a
-		 * little to avoid adding a new BOB regulator type.
-		 */
-		vreg_bob: bob {
-			regulator-min-microvolt = <3296000>;
-			regulator-max-microvolt = <3328000>;
-			regulator-enable-ramp-delay = <500>;
-		};
-	};
-};
-
-&camss {
-	vdda-phy-supply = <&vreg_l1a_1p225>;
-	vdda-pll-supply = <&vreg_s6a_0p87>;
-
-	status = "okay";
-};
-
-&camss_port1 {
-	camss_endpoint1: endpoint {
-		data-lanes = <0 1 2 3>;
-		remote-endpoint = <&cam_front_endpoint>;
-	};
 };
 
-&cci {
-	pinctrl-0 = <&cci1_default>;
-	pinctrl-1 = <&cci1_sleep>;
-	pinctrl-names = "default", "sleep";
-
-	status = "okay";
-};
-
-&cci_i2c1 {
-	camera@1a {
-		compatible = "sony,imx355";
-		reg = <0x1a>;
-
-		clocks = <&camcc CAM_CC_MCLK2_CLK>;
-
-		/*
-		 * The sensor can accept a 24 MHz clock, but 19.2 MHz has
-		 * better driver compatibility.
-		 */
-		assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>;
-		assigned-clock-rates = <19200000>;
-
-		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
-
-		avdd-supply = <&cam_front_ldo>;
-		dvdd-supply = <&cam_front_ldo>;
-		dovdd-supply = <&cam_vio_ldo>;
-
-		pinctrl-0 = <&cam_mclk2_default>;
-		pinctrl-names = "default";
-
-		rotation = <270>;
-		orientation = <0>;
-
-		port {
-			cam_front_endpoint: endpoint {
-				data-lanes = <1 2 3 4>;
-				link-frequencies = /bits/ 64 <360000000>;
-				remote-endpoint = <&camss_endpoint1>;
-			};
-		};
-	};
-};
-
-&gcc {
-	protected-clocks = <GCC_QSPI_CORE_CLK>,
-			   <GCC_QSPI_CORE_CLK_SRC>,
-			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
-};
-
-&gpi_dma1 {
-	status = "okay";
-};
-
-&gpu {
-	status = "okay";
-};
-
-&gpu_zap_shader {
-	firmware-name = "qcom/sdm670/sargo/a615_zap.mbn";
-};
-
-&i2c9 {
-	clock-frequency = <100000>;
-	status = "okay";
-
-	synaptics-rmi4-i2c@20 {
-		compatible = "syna,rmi4-i2c";
-		reg = <0x20>;
-		interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&touchscreen_default>;
-
-		vio-supply = <&ts_1p8_supply>;
-
-		syna,reset-delay-ms = <200>;
-		syna,startup-delay-ms = <200>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rmi4-f01@1 {
-			reg = <0x01>;
-			syna,nosleep-mode = <1>;
-		};
-
-		rmi4-f12@12 {
-			reg = <0x12>;
-			touchscreen-x-mm = <62>;
-			touchscreen-y-mm = <127>;
-			syna,sensor-type = <1>;
-		};
-	};
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdss_dsi0 {
-	vdda-supply = <&vreg_l1a_1p225>;
-	status = "okay";
-
-	panel@0 {
-		compatible = "samsung,s6e3fa7-ams559nk06";
-		reg = <0>;
-
-		reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_default>;
-
-		power-supply = <&vreg_l6b_3p3>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&mdss_dsi0_out>;
-			};
-		};
-	};
-};
-
-&mdss_dsi0_out {
-	remote-endpoint = <&panel_in>;
-	data-lanes = <0 1 2 3>;
+&battery {
+	charge-full-design-microamp-hours = <3000000>;
 };
 
-&mdss_dsi0_phy {
-	vdds-supply = <&vreg_l1b_0p925>;
-	status = "okay";
+&framebuffer {
+	height = <2220>;
 };
 
-&mdss_mdp {
-	status = "okay";
+&panel {
+	compatible = "samsung,s6e3fa7-ams559nk06";
 };
 
-&pm660_charger {
-	monitored-battery = <&battery>;
-	status = "okay";
-};
-
-&pm660_gpios {
-	cam_vio_pin: cam-vio-state {
-		pins = "gpio13";
-		function = "normal";
-		power-source = <0>;
-	};
-};
-
-&pm660_rradc {
-	status = "okay";
-};
-
-&pm660l_flash {
-	status = "okay";
-
-	led-0 {
-		function = LED_FUNCTION_FLASH;
-		color = <LED_COLOR_ID_WHITE>;
-		led-sources = <1>, <2>;
-		led-max-microamp = <500000>;
-		flash-max-microamp = <1500000>;
-		flash-max-timeout-us = <1280000>;
-	};
-};
-
-&pm660l_gpios {
-	cam_front_ldo_pin: cam-front-state {
-		pins = "gpio4";
-		function = "normal";
-		power-source = <0>;
-	};
-
-	vol_up_pin: vol-up-state {
-		pins = "gpio7";
-		function = "normal";
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-		input-enable;
-		bias-pull-up;
-	};
-};
-
-&pon_pwrkey {
-	status = "okay";
-};
-
-&pon_resin {
-	linux,code = <KEY_VOLUMEDOWN>;
-	status = "okay";
-};
-
-&qupv3_id_1 {
-	status = "okay";
-};
-
-&sdhc_1 {
-	supports-cqe;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	mmc-ddr-1_8v;
-
-	qcom,ddr-config = <0xc3040873>;
-
-	vmmc-supply = <&vreg_l4b_2p95>;
-	vqmmc-supply = <&vreg_l8a_1p8>;
-
-	status = "okay";
-};
-
-&tlmm {
-	gpio-reserved-ranges = <0 4>, <81 4>;
-
-	panel_default: panel-default-state {
-		te-pins {
-			pins = "gpio10";
-			function = "mdp_vsync";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-
-		reset-pins {
-			pins = "gpio75";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		mode-pins {
-			pins = "gpio76";
-			function = "gpio";
-			drive-strength = <8>;
-			bias-disable;
-		};
-	};
-
-	touchscreen_default: ts-default-state {
-		ts-reset-pins {
-			pins = "gpio99";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-			output-high;
-		};
-
-		ts-irq-pins {
-			pins = "gpio125";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		ts-switch-pins {
-			pins = "gpio135";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-			output-low;
-		};
-	};
-};
-
-&usb_1_hsphy {
-	vdd-supply = <&vreg_l1b_0p925>;
-	vdda-pll-supply = <&vreg_l10a_1p8>;
-	vdda-phy-dpdm-supply = <&vreg_l7b_3p125>;
-
-	status = "okay";
-};
-
-&usb_1 {
-	qcom,select-utmi-as-pipe-clk;
-	status = "okay";
-};
-
-&usb_1_dwc3 {
-	/* Only peripheral works for now */
-	dr_mode = "peripheral";
-
-	/* Do not assume that sdm670.dtsi will never support USB 3.0 */
-	phys = <&usb_1_hsphy>;
-	phy-names = "usb2-phy";
-	maximum-speed = "high-speed";
+&rmi4_f12 {
+	touchscreen-x-mm = <62>;
+	touchscreen-y-mm = <127>;
 };
-- 
2.54.0

[PATCH v4 2/2] arm64: dts: qcom: add support for pixel 3a xl with the tianma panel

[Richard Acayan]

The Pixel 3a XL has variants with either a Samsung Display Controller (SDC)
panel or a Tianma panel. Add the device tree for the variant with the
Tianma panel.

Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Assisted-by: "Claude Code Review Bot":claude-opus-4-6
---
 arch/arm64/boot/dts/qcom/Makefile             |  1 +
 .../dts/qcom/sdm670-google-bonito-tianma.dts  | 32 +++++++++++++++++++
 2 files changed, 33 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sdm670-google-bonito-tianma.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 169cc9b9ccd3..d909c527d848 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -303,6 +303,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-fairphone-fp3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-motorola-ocean.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm670-google-bonito-tianma.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm670-google-sargo.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
 
diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-bonito-tianma.dts b/arch/arm64/boot/dts/qcom/sdm670-google-bonito-tianma.dts
new file mode 100644
index 000000000000..42ddaf53d150
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-bonito-tianma.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device tree for Google Pixel 3a XL with the Tianma panel.
+ *
+ * Copyright (c) Richard Acayan. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sdm670-google-common.dtsi"
+
+/ {
+	model = "Google Pixel 3a XL (with Tianma panel)";
+	compatible = "google,bonito-tianma", "google,bonito", "qcom,sdm670";
+};
+
+&battery {
+	charge-full-design-microamp-hours = <3700000>;
+};
+
+&framebuffer {
+	height = <2160>;
+};
+
+&panel {
+	compatible = "novatek,nt37700f";
+};
+
+&rmi4_f12 {
+	touchscreen-x-mm = <69>;
+	touchscreen-y-mm = <137>;
+};
-- 
2.54.0

Re: [PATCH v4 1/2] arm64: dts: qcom: sdm670-google: add common device tree include

[Dmitry Baryshkov]

On Wed, May 13, 2026 at 01:25:48PM -0400, Richard Acayan wrote:
> The Pixel 3a XL can be supported by reusing most of the device tree from
> the Pixel 3a. Move the common elements to a common device tree include
> like with other devices.
> 
> Since the original devicetree should only specify non-XL properties, it
> needs to be completely rewritten. Also change the SPDX license
> identifier from GPL-2.0 (which was deprecated as it can be
> misinterpreted as GPLv2 or later) into GPL-2.0-only.
> 
> Signed-off-by: Richard Acayan <mailingradian@gmail.com>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Assisted-by: "Claude Code Review Bot":claude-opus-4-6
> ---
>  ...le-sargo.dts => sdm670-google-common.dtsi} |  22 +-
>  .../boot/dts/qcom/sdm670-google-sargo.dts     | 714 +-----------------
>  2 files changed, 20 insertions(+), 716 deletions(-)
>  copy arch/arm64/boot/dts/qcom/{sdm670-google-sargo.dts => sdm670-google-common.dtsi} (97%)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry

Re: [PATCH v4 2/2] arm64: dts: qcom: add support for pixel 3a xl with the tianma panel

[Dmitry Baryshkov]

On Wed, May 13, 2026 at 01:25:49PM -0400, Richard Acayan wrote:
> The Pixel 3a XL has variants with either a Samsung Display Controller (SDC)
> panel or a Tianma panel. Add the device tree for the variant with the
> Tianma panel.
> 
> Signed-off-by: Richard Acayan <mailingradian@gmail.com>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> Assisted-by: "Claude Code Review Bot":claude-opus-4-6
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |  1 +
>  .../dts/qcom/sdm670-google-bonito-tianma.dts  | 32 +++++++++++++++++++
>  2 files changed, 33 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sdm670-google-bonito-tianma.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 169cc9b9ccd3..d909c527d848 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -303,6 +303,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-fairphone-fp3.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-motorola-ocean.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sdm670-google-bonito-tianma.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm670-google-sargo.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
>  

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry