* [PATCH v3 1/3] dt-bindings: vendor-prefixes: Add prefix for Vicharak
2026-05-19 12:56 [PATCH v3 0/3] arm64: dts: qcom: Add Vicharak Axon Mini Ajit Singh
@ 2026-05-19 12:56 ` Ajit Singh
2026-05-19 12:56 ` [PATCH v3 2/3] dt-bindings: arm: qcom: Add Vicharak Axon Mini Ajit Singh
2026-05-19 12:56 ` [PATCH v3 3/3] arm64: dts: " Ajit Singh
2 siblings, 0 replies; 4+ messages in thread
From: Ajit Singh @ 2026-05-19 12:56 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-msm,
devicetree, linux-kernel, Ajit Singh, Krzysztof Kozlowski
Vicharak develops computing platforms and manufactures single-board
computers, including FPGA-integrated SBCs. Add a vendor prefix for
them.
Link: https://vicharak.in/
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ajit Singh <blfizzyy@gmail.com>
---
Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index ee7fd3cfe203..1948356337b9 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1767,6 +1767,8 @@ patternProperties:
description: VIA Technologies, Inc.
"^vialab,.*":
description: VIA Labs, Inc.
+ "^vicharak,.*":
+ description: Vicharak Computers Pvt. Ltd.
"^vicor,.*":
description: Vicor Corporation
"^videostrong,.*":
--
2.50.1 (Apple Git-155)
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v3 3/3] arm64: dts: qcom: Add Vicharak Axon Mini
2026-05-19 12:56 [PATCH v3 0/3] arm64: dts: qcom: Add Vicharak Axon Mini Ajit Singh
2026-05-19 12:56 ` [PATCH v3 1/3] dt-bindings: vendor-prefixes: Add prefix for Vicharak Ajit Singh
2026-05-19 12:56 ` [PATCH v3 2/3] dt-bindings: arm: qcom: Add Vicharak Axon Mini Ajit Singh
@ 2026-05-19 12:56 ` Ajit Singh
2 siblings, 0 replies; 4+ messages in thread
From: Ajit Singh @ 2026-05-19 12:56 UTC (permalink / raw)
To: Bjorn Andersson, Konrad Dybcio
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-msm,
devicetree, linux-kernel, Ajit Singh
Add DTS for the Vicharak Axon Mini board based on the Qualcomm
QCS6490 SoC.
This adds debug UART, eMMC, UFS, SDIO WLAN, USB 2.0 host, PCIe
support along with regulators.
Signed-off-by: Ajit Singh <blfizzyy@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/qcs6490-vicharak-axon-mini.dts | 1025 +++++++++++++++++
2 files changed, 1026 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-vicharak-axon-mini.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f80b5d9cf1e8..d8d04dc88e08 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -146,6 +146,7 @@ qcs6490-rb3gen2-industrial-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2
dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-industrial-mezzanine.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-vision-mezzanine.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs6490-thundercomm-rubikpi3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs6490-vicharak-axon-mini.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-vicharak-axon-mini.dts b/arch/arm64/boot/dts/qcom/qcs6490-vicharak-axon-mini.dts
new file mode 100644
index 000000000000..7cfd9c436c77
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-vicharak-axon-mini.dts
@@ -0,0 +1,1025 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2026 Vicharak Computers Pvt. Ltd.
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "kodiak.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &mpss_mem;
+/delete-node/ &remoteproc_mpss;
+/delete-node/ &remoteproc_wpss;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &video_mem;
+/delete-node/ &wifi;
+/delete-node/ &wlan_ce_mem;
+/delete-node/ &wlan_fw_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+ model = "Vicharak Axon Mini";
+ compatible = "vicharak,axon-mini", "qcom,qcm6490";
+ chassis-type = "embedded";
+
+ aliases {
+ serial0 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-0 = <&user_leds>;
+ pinctrl-names = "default";
+
+ user-led {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ default-state = "on";
+ panic-indicator;
+ retain-state-suspended;
+ };
+
+ status-led {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_INDICATOR;
+ gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ retain-state-suspended;
+ };
+ };
+
+ reserved-memory {
+ xbl_mem: xbl@80700000 {
+ reg = <0x0 0x80700000 0x0 0x100000>;
+ no-map;
+ };
+
+ cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
+ reg = <0x0 0x81800000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ camera_mem: camera@84300000 {
+ reg = <0x0 0x84300000 0x0 0x500000>;
+ no-map;
+ };
+
+ wpss_mem: wpss@84800000 {
+ reg = <0x0 0x84800000 0x0 0x1900000>;
+ no-map;
+ };
+
+ adsp_mem: adsp@86100000 {
+ reg = <0x0 0x86100000 0x0 0x2800000>;
+ no-map;
+ };
+
+ cdsp_mem: cdsp@88900000 {
+ reg = <0x0 0x88900000 0x0 0x1e00000>;
+ no-map;
+ };
+
+ video_mem: video@8a700000 {
+ reg = <0x0 0x8a700000 0x0 0x700000>;
+ no-map;
+ };
+
+ cvp_mem: cvp@8ae00000 {
+ reg = <0x0 0x8ae00000 0x0 0x500000>;
+ no-map;
+ };
+
+ ipa_fw_mem: ipa-fw@8b300000 {
+ reg = <0x0 0x8b300000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: ipa-gsi@8b310000 {
+ reg = <0x0 0x8b310000 0x0 0xa000>;
+ no-map;
+ };
+
+ gpu_microcode_mem: gpu-microcode@8b31a000 {
+ reg = <0x0 0x8b31a000 0x0 0x2000>;
+ no-map;
+ };
+
+ tz_stat_mem: tz-stat@c0000000 {
+ reg = <0x0 0xc0000000 0x0 0x100000>;
+ no-map;
+ };
+
+ tags_mem: tags@c0100000 {
+ reg = <0x0 0xc0100000 0x0 0x1200000>;
+ no-map;
+ };
+
+ qtee_mem: qtee@c1300000 {
+ reg = <0x0 0xc1300000 0x0 0x500000>;
+ no-map;
+ };
+
+ trusted_apps_mem: trusted-apps@c1800000 {
+ reg = <0x0 0xc1800000 0x0 0x1c00000>;
+ no-map;
+ };
+
+ debug_vm_mem: debug-vm@d0600000 {
+ reg = <0x0 0xd0600000 0x0 0x100000>;
+ no-map;
+ };
+ };
+
+ thermal-zones {
+ chg-skin-thermal {
+ polling-delay-passive = <0>;
+
+ thermal-sensors = <&pm7250b_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ conn-thermal {
+ polling-delay-passive = <0>;
+
+ thermal-sensors = <&pm7250b_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ quiet-thermal {
+ polling-delay-passive = <0>;
+
+ thermal-sensors = <&pmk8350_adc_tm 1>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ sdm-skin-thermal {
+ polling-delay-passive = <0>;
+
+ thermal-sensors = <&pmk8350_adc_tm 3>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+
+ xo-thermal {
+ polling-delay-passive = <0>;
+
+ thermal-sensors = <&pmk8350_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ };
+ };
+ };
+
+ vcc_5v0: regulator-vcc-5v-peri {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ vin-supply = <&vph_pwr>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_5v0_usb2_0: regulator-vcc-5v0-usb2-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_5v0_usb2_0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ vin-supply = <&vcc_5v0>;
+
+ gpio = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&vcc5v0_usb2_0_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_pcie1_3v3: regulator-vcc-pcie1-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_pcie1_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&vcc_5v0>;
+
+ gpio = <&tlmm 115 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&vcc_pcie1_3v3_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_pcie0_dsi_3v3: regulator-vcc-pcie0-dsi-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_pcie0_dsi_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&vcc_5v0>;
+
+ gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&vcc_pcie0_dsi_3v3_en>;
+ pinctrl-names = "default";
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ wlan_pwrseq: wlan-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+
+ pinctrl-0 = <&wl_enable_h>;
+ pinctrl-names = "default";
+
+ reset-gpios = <&tlmm 84 GPIO_ACTIVE_LOW>;
+ post-power-on-delay-ms = <200>;
+ power-off-delay-us = <20000>;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm7325-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+ vdd-l2-l7-supply = <&vreg_bob_3p296>;
+ vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+ vdd-l8-supply = <&vreg_s7b_0p972>;
+ vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+ vdd-l13-supply = <&vreg_s7b_0p972>;
+ vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+ vreg_s1b_1p872: smps1 {
+ regulator-name = "vreg_s1b_1p872";
+ regulator-min-microvolt = <1840000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7b_0p972: smps7 {
+ regulator-name = "vreg_s7b_0p972";
+ regulator-min-microvolt = <535000>;
+ regulator-max-microvolt = <1120000>;
+ };
+
+ vreg_s8b_1p272: smps8 {
+ regulator-name = "vreg_s8b_1p272";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+ };
+
+ vreg_l1b_0p912: ldo1 {
+ regulator-name = "vreg_l1b_0p912";
+ regulator-min-microvolt = <825000>;
+ regulator-max-microvolt = <925000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p072: ldo2 {
+ regulator-name = "vreg_l2b_3p072";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b_0p504: ldo3 {
+ regulator-name = "vreg_l3b_0p504";
+ regulator-min-microvolt = <312000>;
+ regulator-max-microvolt = <650000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p2: ldo6 {
+ regulator-name = "vreg_l6b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_2p96: ldo7 {
+ regulator-name = "vreg_l7b_2p96";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_0p904: ldo8 {
+ regulator-name = "vreg_l8b_0p904";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_1p2: ldo9 {
+ regulator-name = "vreg_l9b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+ RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p504: ldo11 {
+ regulator-name = "vreg_l11b_1p504";
+ regulator-min-microvolt = <1776000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_0p751: ldo12 {
+ regulator-name = "vreg_l12b_0p751";
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_0p53: ldo13 {
+ regulator-name = "vreg_l13b_0p53";
+ regulator-min-microvolt = <530000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_1p08: ldo14 {
+ regulator-name = "vreg_l14b_1p08";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_0p765: ldo15 {
+ regulator-name = "vreg_l15b_0p765";
+ regulator-min-microvolt = <765000>;
+ regulator-max-microvolt = <1020000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_1p1: ldo16 {
+ regulator-name = "vreg_l16b_1p1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vreg_l17b_1p7: ldo17 {
+ regulator-name = "vreg_l17b_1p7";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vreg_l18b_1p8: ldo18 {
+ regulator-name = "vreg_l18b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19b_1p8: ldo19 {
+ regulator-name = "vreg_l19b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8350c-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+ vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+ vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+ vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+ vdd-l10-supply = <&vreg_s7b_0p972>;
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_s1c_2p19: smps1 {
+ regulator-name = "vreg_s1c_2p19";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2208000>;
+ };
+
+ vreg_s9c_1p084: smps9 {
+ regulator-name = "vreg_s9c_1p084";
+ regulator-min-microvolt = <1010000>;
+ regulator-max-microvolt = <1170000>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-name = "vreg_l1c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2c_1p62: ldo2 {
+ regulator-name = "vreg_l2c_1p62";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1976000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_2p8: ldo3 {
+ regulator-name = "vreg_l3c_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3540000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4c_1p62: ldo4 {
+ regulator-name = "vreg_l4c_1p62";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5c_1p62: ldo5 {
+ regulator-name = "vreg_l5c_1p62";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6c_2p96: ldo6 {
+ regulator-name = "vreg_l6c_2p96";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-name = "vreg_l7c_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p62: ldo8 {
+ regulator-name = "vreg_l8c_1p62";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p96: ldo9 {
+ regulator-name = "vreg_l9c_2p96";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_0p88: ldo10 {
+ regulator-name = "vreg_l10c_0p88";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_2p8: ldo11 {
+ regulator-name = "vreg_l11c_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12c_1p8: ldo12 {
+ regulator-name = "vreg_l12c_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+
+ /*
+ * VREG_L12C_1P8 supplies the Ampak WLAN/BT module
+ * VDDIO and the external 32.768 kHz oscillator.
+ */
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vreg_l13c_2p7: ldo13 {
+ regulator-name = "vreg_l13c_2p7";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob_3p296: bob {
+ regulator-name = "vreg_bob_3p296";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+};
+
+&gcc {
+ protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+ <GCC_MSS_CFG_AHB_CLK>,
+ <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+ <GCC_MSS_OFFLINE_AXI_CLK>,
+ <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+ <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+ <GCC_MSS_SNOC_AXI_CLK>,
+ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <GCC_QSPI_CORE_CLK>,
+ <GCC_QSPI_CORE_CLK_SRC>,
+ <GCC_SEC_CTRL_CLK_SRC>,
+ <GCC_WPSS_AHB_BDG_MST_CLK>,
+ <GCC_WPSS_AHB_CLK>,
+ <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+};
+
+&gpu_zap_shader {
+ firmware-name = "qcom/qcs6490/a660_zap.mbn";
+};
+
+&ice {
+ status = "disabled";
+};
+
+&pcie0 {
+ perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie0_clkreq_n>, <&pcie0_reset_n>, <&pcie0_wake_n>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_clkreq_n {
+ bias-pull-up;
+ drive-strength = <2>;
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l10c_0p88>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+
+ status = "okay";
+};
+
+&pcie1 {
+ perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>, <&pcie1_clkreq_n>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie1_clkreq_n {
+ bias-pull-up;
+ drive-strength = <2>;
+};
+
+&pcie1_phy {
+ vdda-phy-supply = <&vreg_l10c_0p88>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+
+ status = "okay";
+};
+
+&pm7250b_adc {
+ channel@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "charger_skin_therm";
+ };
+
+ channel@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "conn_therm";
+ };
+};
+
+&pm7250b_adc_tm {
+ status = "okay";
+
+ charger-skin-therm@0 {
+ reg = <0>;
+ io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ conn-therm@1 {
+ reg = <1>;
+ io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm7325_temp_alarm {
+ io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>;
+ io-channel-names = "thermal";
+};
+
+&pmk8350_adc_tm {
+ status = "okay";
+
+ xo-therm@0 {
+ reg = <0>;
+ io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ quiet-therm@1 {
+ reg = <1>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+
+ sdm-skin-therm@3 {
+ reg = <3>;
+ io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pmk8350_rtc {
+ status = "okay";
+};
+
+&pmk8350_vadc {
+ status = "okay";
+
+ channel@3 {
+ reg = <PMK8350_ADC7_DIE_TEMP>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmk8350_die_therm";
+ };
+
+ channel@44 {
+ reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pmk8350_xo_therm";
+ };
+
+ channel@103 {
+ reg = <PM7325_ADC7_DIE_TEMP>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_die_therm";
+ };
+
+ channel@144 {
+ reg = <PM7325_ADC7_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_quiet_therm";
+ };
+
+ channel@146 {
+ reg = <PM7325_ADC7_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ qcom,pre-scaling = <1 1>;
+ label = "pm7325_sdm_skin_therm";
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_RESTART>;
+
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ firmware-name = "qcom/qcs6490/qupv3fw.elf";
+
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ firmware-name = "qcom/qcs6490/qupv3fw.elf";
+
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/qcs6490/adsp.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/qcs6490/cdsp.mbn";
+
+ status = "okay";
+};
+
+&sdc1_clk {
+ bias-disable;
+ drive-strength = <16>;
+};
+
+&sdc1_cmd {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdc1_data {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdc1_rclk {
+ bias-pull-down;
+};
+
+&sdc2_clk {
+ bias-disable;
+ drive-strength = <16>;
+};
+
+&sdc2_cmd {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdc2_data {
+ bias-pull-up;
+ drive-strength = <10>;
+};
+
+&sdhc_1 {
+ vqmmc-supply = <&vreg_l19b_1p8>;
+ vmmc-supply = <&vreg_bob_3p296>;
+
+ non-removable;
+ no-sd;
+ no-sdio;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vqmmc-supply = <&vreg_l2c_1p62>;
+ vmmc-supply = <&vreg_l6c_2p96>;
+
+ mmc-pwrseq = <&wlan_pwrseq>;
+
+ bus-width = <4>;
+ non-removable;
+ no-sd;
+ no-mmc;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ max-frequency = <100000000>;
+
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <48 4>; /* NFC */
+
+ pcie0_reset_n: pcie0-reset-n-state {
+ pins = "gpio87";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie0_wake_n: pcie0-wake-n-state {
+ pins = "gpio89";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ pcie1_reset_n: pcie1-reset-n-state {
+ pins = "gpio2";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pcie1_wake_n: pcie1-wake-n-state {
+ pins = "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ user_leds: user-led-state {
+ pins = "gpio19", "gpio55";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ vcc_3v3_en: vcc-3v3-en-state {
+ pins = "gpio113";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ vcc5v0_usb2_0_en: vcc-5v0-usb2-0-en-state {
+ pins = "gpio117";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ vcc_pcie0_dsi_3v3_en: vcc-pcie0-dsi-3v3-en-state {
+ pins = "gpio114";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ vcc_pcie1_3v3_en: vcc-pcie1-3v3-en-state {
+ pins = "gpio115";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wl_enable_h: wl-enable-h-state {
+ pins = "gpio84";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ /delete-property/ qcom,ice;
+
+ reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l7b_2p96>;
+ vcc-max-microamp = <800000>;
+ vccq-supply = <&vreg_l9b_1p2>;
+ vccq-max-microamp = <900000>;
+ vccq2-supply = <&vreg_l9b_1p2>;
+ vccq2-max-microamp = <900000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l10c_0p88>;
+ vdda-pll-supply = <&vreg_l6b_1p2>;
+
+ status = "okay";
+};
+
+&usb_2 {
+ dr_mode = "host";
+
+ status = "okay";
+};
+
+&usb_2_hsphy {
+ vdda-pll-supply = <&vreg_l10c_0p88>;
+ vdda33-supply = <&vreg_l2b_3p072>;
+ vdda18-supply = <&vreg_l1c_1p8>;
+
+ status = "okay";
+};
+
+&venus {
+ status = "okay";
+};
--
2.50.1 (Apple Git-155)
^ permalink raw reply related [flat|nested] 4+ messages in thread