* [PATCH v5 1/2] dt-bindings: leds: backlight: document the SY7758 6-channel High Efficiency LED Driver
2026-05-29 19:23 [PATCH v5 0/2] backlight: Add SY7758 6-channel High Efficiency LED Driver support Neil Armstrong
@ 2026-05-29 19:23 ` Neil Armstrong
2026-05-29 19:23 ` [PATCH v5 2/2] backlight: Add SY7758 6-channel High Efficiency LED Driver support Neil Armstrong
1 sibling, 0 replies; 4+ messages in thread
From: Neil Armstrong @ 2026-05-29 19:23 UTC (permalink / raw)
To: Lee Jones, Daniel Thompson, Jingoo Han, Pavel Machek, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Helge Deller
Cc: dri-devel, linux-leds, devicetree, linux-kernel, linux-fbdev,
KancyJoe, Neil Armstrong, Krzysztof Kozlowski
Document the Silergy SY7758 6-channel High Efficiency LED Driver
used for backlight brightness control.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
.../bindings/leds/backlight/silergy,sy7758.yaml | 52 ++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/backlight/silergy,sy7758.yaml b/Documentation/devicetree/bindings/leds/backlight/silergy,sy7758.yaml
new file mode 100644
index 000000000000..64af6b34641a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/silergy,sy7758.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/silergy,sy7758.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silergy SY7758 6-channel High Efficiency LED Driver
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+ Silergy SY7758 is a high efficiency 6-channels LED backlight
+ driver with I2C brightness control.
+
+allOf:
+ - $ref: common.yaml#
+
+properties:
+ compatible:
+ const: silergy,sy7758
+
+ reg:
+ maxItems: 1
+
+ vdd-supply: true
+
+ enable-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ backlight@11 {
+ compatible = "silergy,sy7758";
+ reg = <0x11>;
+ vdd-supply = <&bl_vdd>;
+ enable-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+ };
--
2.34.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v5 2/2] backlight: Add SY7758 6-channel High Efficiency LED Driver support
2026-05-29 19:23 [PATCH v5 0/2] backlight: Add SY7758 6-channel High Efficiency LED Driver support Neil Armstrong
2026-05-29 19:23 ` [PATCH v5 1/2] dt-bindings: leds: backlight: document the SY7758 6-channel High Efficiency LED Driver Neil Armstrong
@ 2026-05-29 19:23 ` Neil Armstrong
2026-05-29 19:56 ` sashiko-bot
1 sibling, 1 reply; 4+ messages in thread
From: Neil Armstrong @ 2026-05-29 19:23 UTC (permalink / raw)
To: Lee Jones, Daniel Thompson, Jingoo Han, Pavel Machek, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Helge Deller
Cc: dri-devel, linux-leds, devicetree, linux-kernel, linux-fbdev,
KancyJoe, Neil Armstrong
From: KancyJoe <kancy2333@outlook.com>
Implement support for the Silergy SY7758 6-channel High Efficiency LED
Driver used for backlight brightness control in the Ayaneo Pocket S2
dual-DSI panel.
Signed-off-by: KancyJoe <kancy2333@outlook.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/video/backlight/Kconfig | 8 ++
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/sy7758.c | 259 +++++++++++++++++++++++++++++++++++++++
3 files changed, 268 insertions(+)
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index a7a3fbaf7c29..a1f70a2bae99 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -207,6 +207,14 @@ config BACKLIGHT_KTZ8866
Say Y to enable the backlight driver for the Kinetic KTZ8866
found in Xiaomi Mi Pad 5 series.
+config BACKLIGHT_SY7758
+ tristate "Backlight Driver for Silergy SY7758"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say Y to enable the backlight driver for the Silergy SY7758
+ backlight controller found in Ayaneo Pocket S2.
+
config BACKLIGHT_LM3533
tristate "Backlight Driver for LM3533"
depends on MFD_LM3533
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 794820a98ed4..39ef588b1cf2 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o
obj-$(CONFIG_BACKLIGHT_QCOM_WLED) += qcom-wled.o
obj-$(CONFIG_BACKLIGHT_RT4831) += rt4831-backlight.o
obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
+obj-$(CONFIG_BACKLIGHT_SY7758) += sy7758.o
obj-$(CONFIG_BACKLIGHT_SKY81452) += sky81452-backlight.o
obj-$(CONFIG_BACKLIGHT_TPS65217) += tps65217_bl.o
obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
diff --git a/drivers/video/backlight/sy7758.c b/drivers/video/backlight/sy7758.c
new file mode 100644
index 000000000000..786589cb8df9
--- /dev/null
+++ b/drivers/video/backlight/sy7758.c
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Silergy SY7758 6-channel High Efficiency LED Driver
+ *
+ * Copyright (C) 2025 Kancy Joe <kancy2333@outlook.com>
+ * Copyright (C) 2026 Linaro Limited
+ * Author: Neil Armstrong <neil.armstrong@linaro.org>
+ */
+#include <linux/backlight.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+#include <linux/err.h>
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <linux/bitfield.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#define DEFAULT_BRIGHTNESS 1024
+#define MAX_BRIGHTNESS 4080
+#define REG_MAX 0xAE
+
+/* Registers */
+#define REG_DEV_CTL 0x01
+#define REG_DEV_ID 0x03
+#define REG_BRT_12BIT_L 0x10
+#define REG_BRT_12BIT_H 0x11
+
+/* OTP memory */
+#define REG_OTP_CFG0 0xA0
+#define REG_OTP_CFG1 0xA1
+#define REG_OTP_CFG2 0xA2
+#define REG_OTP_CFG5 0xA5
+#define REG_OTP_CFG9 0xA9
+
+/* Fields */
+#define BIT_DEV_CTL_FAST BIT(7)
+#define MSK_DEV_CTL_BRT_MODE GENMASK(2, 1)
+#define BIT_DEV_CTL_BL_CTLB BIT(0)
+
+#define MSK_BRT_12BIT_L GENMASK(7, 0)
+#define MSK_BRT_12BIT_H GENMASK(3, 0)
+
+#define MSK_CFG0_CURRENT_LOW GENMASK(7, 0)
+
+#define BIT_CFG1_PDET_STDBY BIT(7)
+#define MSK_CFG1_CURRENT_MAX GENMASK(6, 4)
+#define MSK_CFG1_CURRENT_HIGH GENMASK(3, 0)
+
+#define BIT_CFG2_UVLO_EN BIT(5)
+#define BIT_CFG2_UVLO_TH BIT(4)
+#define BIT_CFG2_BL_ON BIT(3)
+#define BIT_CFG2_ISET_EN BIT(2)
+#define BIT_CFG2_BST_ESET_EN BIT(1)
+
+#define BIT_CFG5_PWM_DIRECT BIT(7)
+#define MSK_CFG5_PS_MODE GENMASK(6, 4)
+#define MSK_CFG5_PWM_FREQ GENMASK(3, 0)
+
+#define MSK_CFG9_VBST_MAX GENMASK(7, 5)
+#define BIT_CFG9_JUMP_EN BIT(4)
+#define MSK_CFG9_JUMP_TH GENMASK(3, 2)
+#define MSK_CFG9_JUMP_VOLTAGE GENMASK(1, 0)
+
+struct sy7758 {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct gpio_desc *gpio;
+ struct backlight_device *bl;
+};
+
+static const struct regmap_config sy7758_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = REG_MAX,
+};
+
+static int sy7758_backlight_update_status(struct backlight_device *backlight_dev)
+{
+ struct sy7758 *sydev = bl_get_data(backlight_dev);
+ unsigned int brightness = backlight_get_brightness(backlight_dev);
+ int ret;
+
+ ret = regmap_write(sydev->regmap, REG_BRT_12BIT_L,
+ FIELD_PREP(MSK_BRT_12BIT_L,
+ brightness & 0xff));
+ if (ret)
+ return ret;
+
+ ret = regmap_write(sydev->regmap, REG_BRT_12BIT_H,
+ FIELD_PREP(MSK_BRT_12BIT_H,
+ (brightness >> 8) & 0xf));
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct backlight_ops sy7758_backlight_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .update_status = sy7758_backlight_update_status,
+};
+
+static int sy7758_init(struct sy7758 *sydev)
+{
+ int ret = 0;
+
+ ret = regmap_write(sydev->regmap, REG_DEV_CTL,
+ BIT_DEV_CTL_FAST | BIT_DEV_CTL_BL_CTLB |
+ FIELD_PREP(MSK_DEV_CTL_BRT_MODE, 2));
+ if (ret)
+ return ret;
+
+ ret = regmap_write(sydev->regmap, REG_BRT_12BIT_L,
+ FIELD_PREP(MSK_BRT_12BIT_L,
+ DEFAULT_BRIGHTNESS & 0xff));
+ if (ret)
+ return ret;
+
+ ret = regmap_write(sydev->regmap, REG_BRT_12BIT_H,
+ FIELD_PREP(MSK_BRT_12BIT_H,
+ (DEFAULT_BRIGHTNESS >> 8)));
+ if (ret)
+ return ret;
+
+ ret = regmap_write(sydev->regmap, REG_OTP_CFG5,
+ FIELD_PREP(MSK_CFG5_PS_MODE, 6) |
+ FIELD_PREP(MSK_CFG5_PWM_FREQ, 4));
+ if (ret)
+ return ret;
+
+ ret = regmap_write(sydev->regmap, REG_OTP_CFG0,
+ FIELD_PREP(MSK_CFG0_CURRENT_LOW, 85));
+ if (ret)
+ return ret;
+
+ ret = regmap_write(sydev->regmap, REG_OTP_CFG1,
+ BIT_CFG1_PDET_STDBY |
+ FIELD_PREP(MSK_CFG1_CURRENT_MAX, 1) |
+ FIELD_PREP(MSK_CFG1_CURRENT_HIGH, 10));
+ if (ret)
+ return ret;
+
+ ret = regmap_write(sydev->regmap, REG_OTP_CFG9,
+ FIELD_PREP(MSK_CFG9_VBST_MAX, 4));
+ if (ret)
+ return ret;
+
+ ret = regmap_write(sydev->regmap, REG_OTP_CFG2,
+ BIT_CFG2_BL_ON | BIT_CFG2_UVLO_EN);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int sy7758_probe(struct i2c_client *client)
+{
+ struct backlight_properties props = { };
+ struct device *dev = &client->dev;
+ struct sy7758 *sydev;
+ unsigned int dev_id;
+ int ret;
+
+ sydev = devm_kzalloc(dev, sizeof(*sydev), GFP_KERNEL);
+ if (!sydev)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, sydev);
+
+ /* Initialize regmap */
+ sydev->client = client;
+ sydev->regmap = devm_regmap_init_i2c(client, &sy7758_regmap_config);
+ if (IS_ERR(sydev->regmap))
+ return dev_err_probe(dev, PTR_ERR(sydev->regmap),
+ "failed to init regmap\n");
+
+ /* Get and enable regulator */
+ ret = devm_regulator_get_enable(dev, "vdd");
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get regulator\n");
+
+ fsleep(100);
+
+ /* Get enable GPIO and set to high */
+ sydev->gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
+ if (IS_ERR(sydev->gpio))
+ return dev_err_probe(dev, PTR_ERR(sydev->gpio),
+ "failed to get enable GPIO\n");
+
+ /* Let some time for HW to settle */
+ fsleep(10000);
+
+ /* try read and check device id */
+ ret = regmap_read(sydev->regmap, REG_DEV_ID, &dev_id);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "failed to read device id\n");
+ if (dev_id != 0x63) {
+ dev_err(dev, "unexpected device id: 0x%02x\n", dev_id);
+ return -ENODEV;
+ }
+
+ /* Initialize and set default brightness */
+ ret = sy7758_init(sydev);
+ if (ret)
+ return ret;
+
+ props.type = BACKLIGHT_RAW;
+ props.max_brightness = MAX_BRIGHTNESS;
+ props.brightness = DEFAULT_BRIGHTNESS;
+ props.scale = BACKLIGHT_SCALE_LINEAR;
+
+ sydev->bl = devm_backlight_device_register(dev, "sy7758-backlight",
+ dev, sydev, &sy7758_backlight_ops,
+ &props);
+ if (IS_ERR(sydev->bl))
+ return dev_err_probe(dev, PTR_ERR(sydev->bl),
+ "failed to register backlight device\n");
+
+ return backlight_update_status(sydev->bl);
+}
+
+static void sy7758_remove(struct i2c_client *client)
+{
+ struct sy7758 *sydev = i2c_get_clientdata(client);
+
+ backlight_disable(sydev->bl);
+}
+
+static const struct i2c_device_id sy7758_ids[] = {
+ { "sy7758" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, sy7758_ids);
+
+static const struct of_device_id sy7758_match_table[] = {
+ { .compatible = "silergy,sy7758", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sy7758_match_table);
+
+static struct i2c_driver sy7758_driver = {
+ .driver = {
+ .name = "sy7758",
+ .of_match_table = sy7758_match_table,
+ },
+ .probe = sy7758_probe,
+ .remove = sy7758_remove,
+ .id_table = sy7758_ids,
+};
+
+module_i2c_driver(sy7758_driver);
+
+MODULE_DESCRIPTION("Silergy SY7758 Backlight Driver");
+MODULE_AUTHOR("Kancy Joe <kancy2333@outlook.com>");
+MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>");
+MODULE_LICENSE("GPL");
--
2.34.1
^ permalink raw reply related [flat|nested] 4+ messages in thread