From: Herman van Hazendonk <github.com@herrie.org>
To: lee@kernel.org, robh@kernel.org
Cc: krzk+dt@kernel.org, conor+dt@kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Herman van Hazendonk <github.com@herrie.org>
Subject: [PATCH 0/1] dt-bindings: mfd: add ti,lm8502 LED + haptic controller
Date: Wed, 3 Jun 2026 10:02:55 +0200 [thread overview]
Message-ID: <20260603080256.853037-1-github.com@herrie.org> (raw)
Add a YAML binding for the TI LM8502, an I2C combo LED + haptic
controller used in the HP TouchPad (MSM8x60 / APQ8060) tablet.
The LM8502 exposes ten constant-current LED outputs (D1..D10) and an
internal H-bridge for driving a vibrator motor. Pin D10 is shared
between the tenth LED channel and the haptic output; the haptic child
driver mux's D10 to the H-bridge path at each FF_RUMBLE event.
The device is modelled as an MFD with two child sub-nodes:
ti,lm8502-leds - LED-class outputs D1..D10 (per-LED reg +
led-max-microamp properties)
ti,lm8502-haptic - EV_FF / FF_RUMBLE input device for the
internal H-bridge, with optional
ti,invert-direction property
The MFD core driver was already sent separately:
"[PATCH v2 0/1] mfd: lm8502: add core MFD driver for TI LM8502"
Message-ID: <20260603040026.398009-1-github.com@herrie.org>
Child drivers (leds-lm8502, input-lm8502-haptic) will follow as
separate series once the binding and core are accepted.
Herman van Hazendonk (1):
dt-bindings: mfd: add ti,lm8502 combo LED + haptic controller
.../devicetree/bindings/mfd/ti,lm8502.yaml | 160 ++++++++++++++++++
1 file changed, 160 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/ti,lm8502.yaml
--
2.43.0
next reply other threads:[~2026-06-03 8:03 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-03 8:02 Herman van Hazendonk [this message]
2026-06-03 8:02 ` [PATCH 1/1] dt-bindings: mfd: add ti,lm8502 combo LED + haptic controller Herman van Hazendonk
2026-06-03 8:08 ` sashiko-bot
2026-06-03 8:17 ` Herman van Hazendonk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260603080256.853037-1-github.com@herrie.org \
--to=github.com@herrie.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox