[PATCH 2/3] arm64: dts: qcom: shikra: Add Iris video codec node

[Vikash Garodia <vikash.garodia@oss.qualcomm.com>]

Add the Iris video codec device tree node for the Shikra platform.

Shikra reuses the QCM2290-class video hardware and programming model.
The video node is added to describe the Iris based video decoder
encoder block, allowing the media driver to probe and initialize
the hardware.

Signed-off-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/shikra.dtsi | 61 ++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/shikra.dtsi b/arch/arm64/boot/dts/qcom/shikra.dtsi
index 1ccb0f1419aaa34d32f3c3eaabdb8727a497b501..b77cc9d7d65a6876b4aa058c4e0de8c89cea81d0 100644
--- a/arch/arm64/boot/dts/qcom/shikra.dtsi
+++ b/arch/arm64/boot/dts/qcom/shikra.dtsi
@@ -655,6 +655,67 @@ gpucc: clock-controller@5990000 {
 			#power-domain-cells = <1>;
 		};
 
+		iris: video-codec@5a00000 {
+			compatible = "qcom,shikra-iris", "qcom,qcm2290-venus";
+			reg = <0x0 0x5a00000 0x0 0x200000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			power-domains = <&gcc GCC_VENUS_GDSC>,
+					<&gcc GCC_VCODEC0_GDSC>,
+					<&rpmpd QCM2290_VDDCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "cx";
+			operating-points-v2 = <&venus_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_VENUS_CTL_CLK>,
+				 <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&gcc GCC_VENUS_CTL_AXI_CLK>,
+				 <&gcc GCC_VIDEO_THROTTLE_CORE_CLK>,
+				 <&gcc GCC_VIDEO_VCODEC0_SYS_CLK>,
+				 <&gcc GCC_VCODEC0_AXI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "bus",
+				      "throttle",
+				      "vcodec0_core",
+				      "vcodec0_bus";
+
+			memory-region = <&video_mem>;
+			interconnects = <&mmnrt_virt MASTER_VIDEO_P0 RPM_ALWAYS_TAG
+					 &mc_virt SLAVE_EBI_CH0 RPM_ALWAYS_TAG>,
+					<&mem_noc MASTER_AMPSS_M0 RPM_ACTIVE_TAG
+					 &config_noc SLAVE_VENUS_CFG RPM_ACTIVE_TAG>;
+			interconnect-names = "video-mem",
+					     "cpu-cfg";
+
+			iommus = <&apps_smmu 0x780 0x0020>;
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133333333 {
+					opp-hz = /bits/ 64 <133333333>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					required-opps = <&rpmpd_opp_svs_plus>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+			};
+		};
+
 		dispcc: clock-controller@5f00000 {
 			compatible = "qcom,shikra-dispcc", "qcom,qcm2290-dispcc";
 			reg = <0x0 0x05f00000 0x0 0x20000>;

-- 
2.34.1