[PATCH 0/7] riscv: eswin: eic7700: Add support for clocks, resets, pinctrl, HSP power domain, I2C and watchdog

[PATCH 0/7] riscv: eswin: eic7700: Add support for clocks, resets, pinctrl, HSP power domain, I2C and watchdog

[Pinkesh Vaghela]

This series extends the ESWIN's EIC7700 SoC support beyond the
already upstreamed basic DTS and DTSI files. It introduces DT nodes
for reset, clock, pinctrl, HSP power domain, I2C and Watchdog.

As support for boot media is yet to be upstreamed, we have
boot-tested this series with initramfs on HiFive Premier P550 board
using Linux 7.1, U-Boot 2024.01 and OpenSBI 1.8.1.

[1]: https://lore.kernel.org/lkml/20251113014656.2605447-1-samuel.holland@sifive.com/

Pinkesh Vaghela (2):
  dt-bindings: mfd: syscon: add ESWIN EIC7700 compatible
  riscv: dts: eswin: add hsp power domain

Pritesh Patel (4):
  riscv: dts: eswin: add reset generator for EIC7700 SoC
  riscv: dts: eswin: add clock generator for EIC7700 SoC
  riscv: dts: eswin: add I2C controller support
  riscv: dts: eswin: add watchdog support

Yulin Lu (1):
  riscv: dts: eswin: eic7700: add pinctrl support

 .../devicetree/bindings/mfd/syscon.yaml       |   2 +
 .../dts/eswin/eic7700-hifive-premier-p550.dts | 182 ++++
 .../riscv/boot/dts/eswin/eic7700-pinctrl.dtsi | 888 ++++++++++++++++++
 arch/riscv/boot/dts/eswin/eic7700.dtsi        | 234 +++++
 4 files changed, 1306 insertions(+)
 create mode 100644 arch/riscv/boot/dts/eswin/eic7700-pinctrl.dtsi

-- 
2.34.1

[PATCH 1/7] riscv: dts: eswin: add reset generator for EIC7700 SoC

[Pinkesh Vaghela]

From: Pritesh Patel <pritesh.patel@einfochips.com>

Add reset generator node for EIC7700 SoC

Signed-off-by: Pritesh Patel <pritesh.patel@einfochips.com>
Signed-off-by: Pinkesh Vaghela <pinkesh.vaghela@einfochips.com>
---
 arch/riscv/boot/dts/eswin/eic7700.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/riscv/boot/dts/eswin/eic7700.dtsi b/arch/riscv/boot/dts/eswin/eic7700.dtsi
index c3ed93008bca..430a210f01e6 100644
--- a/arch/riscv/boot/dts/eswin/eic7700.dtsi
+++ b/arch/riscv/boot/dts/eswin/eic7700.dtsi
@@ -4,6 +4,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/reset/eswin,eic7700-reset.h>
 
 / {
 	#address-cells = <2>;
@@ -341,5 +342,11 @@ gpioD: gpio-port@3 {
 				#gpio-cells = <2>;
 			};
 		};
+
+		reset: reset-controller@51828300 {
+			compatible = "eswin,eic7700-reset";
+			reg = <0x0 0x51828300 0x0 0x200>;
+			#reset-cells = <1>;
+		};
 	};
 };
-- 
2.34.1

[PATCH 2/7] riscv: dts: eswin: add clock generator for EIC7700 SoC

[Pinkesh Vaghela]

From: Pritesh Patel <pritesh.patel@einfochips.com>

Add clock generator node for EIC7700 SoC.
HiFive Premier P550 boards have 24MHz crystal oscillator to provide
the input clock.

Signed-off-by: Pritesh Patel <pritesh.patel@einfochips.com>
Signed-off-by: Pinkesh Vaghela <pinkesh.vaghela@einfochips.com>
---
 .../boot/dts/eswin/eic7700-hifive-premier-p550.dts  |  5 +++++
 arch/riscv/boot/dts/eswin/eic7700.dtsi              | 13 +++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
index 131ed1fc6b2e..1fb92f0e7c55 100644
--- a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
+++ b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
@@ -20,6 +20,11 @@ chosen {
 	};
 };
 
+&xtal {
+	clock-frequency = <24000000>;
+	clock-output-names = "xtal24m";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/eswin/eic7700.dtsi b/arch/riscv/boot/dts/eswin/eic7700.dtsi
index 430a210f01e6..a7ebb1115958 100644
--- a/arch/riscv/boot/dts/eswin/eic7700.dtsi
+++ b/arch/riscv/boot/dts/eswin/eic7700.dtsi
@@ -4,6 +4,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/clock/eswin,eic7700-clock.h>
 #include <dt-bindings/reset/eswin,eic7700-reset.h>
 
 / {
@@ -203,6 +204,11 @@ pmu {
 				<0x00000000 0x0000000f 0xfffffffc 0x000000ff 0x00000078>;
 	};
 
+	xtal: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		ranges;
@@ -343,6 +349,13 @@ gpioD: gpio-port@3 {
 			};
 		};
 
+		clk: clock-controller@51828000 {
+			compatible = "eswin,eic7700-clock";
+			reg = <0x0 0x51828000 0x0 0x300>;
+			clocks = <&xtal>;
+			#clock-cells = <1>;
+		};
+
 		reset: reset-controller@51828300 {
 			compatible = "eswin,eic7700-reset";
 			reg = <0x0 0x51828300 0x0 0x200>;
-- 
2.34.1

[PATCH 3/7] riscv: dts: eswin: eic7700: add pinctrl support

[Pinkesh Vaghela]

From: Yulin Lu <luyulin@eswincomputing.com>

Add pinctrl node and related pin configuration for EIC7700 SoC

Co-developed-by: Pritesh Patel <pritesh.patel@einfochips.com>
Signed-off-by: Pritesh Patel <pritesh.patel@einfochips.com>
Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
Signed-off-by: Pinkesh Vaghela <pinkesh.vaghela@einfochips.com>
---
 .../dts/eswin/eic7700-hifive-premier-p550.dts | 109 +++
 .../riscv/boot/dts/eswin/eic7700-pinctrl.dtsi | 888 ++++++++++++++++++
 arch/riscv/boot/dts/eswin/eic7700.dtsi        |   5 +
 3 files changed, 1002 insertions(+)
 create mode 100644 arch/riscv/boot/dts/eswin/eic7700-pinctrl.dtsi

diff --git a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
index 1fb92f0e7c55..e7bb96e14958 100644
--- a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
+++ b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "eic7700.dtsi"
+#include "eic7700-pinctrl.dtsi"
 
 / {
 	compatible = "sifive,hifive-premier-p550", "eswin,eic7700";
@@ -18,6 +19,15 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	vcc_1v8: vcc1v8 {
+		 compatible = "regulator-fixed";
+		 regulator-name = "vcc1v8";
+		 regulator-always-on;
+		 regulator-boot-on;
+		 regulator-min-microvolt = <1800000>;
+		 regulator-max-microvolt = <1800000>;
+	 };
 };
 
 &xtal {
@@ -25,6 +35,105 @@ &xtal {
 	clock-output-names = "xtal24m";
 };
 
+&gpio0_pins {
+	bias-disable;
+	input-enable;
+};
+
+&gpio5_pins {
+	bias-disable;
+	input-enable;
+};
+
+&gpio11_pins {
+	bias-disable;
+	input-enable;
+};
+
+&gpio14_pins {
+	bias-pull-up;
+	input-disable;
+};
+
+&gpio15_pins {
+	bias-disable;
+	input-enable;
+};
+
+&gpio28_pins {
+	bias-disable;
+	input-enable;
+};
+
+&gpio43_pins {
+	bias-disable;
+	input-disable;
+};
+
+&gpio71_pins {
+	bias-pull-up;
+	input-disable;
+};
+
+&gpio74_pins {
+	bias-pull-up;
+	input-disable;
+};
+
+&gpio76_pins {
+	bias-disable;
+	input-disable;
+};
+
+&gpio77_pins {
+	bias-pull-up;
+	input-disable;
+};
+
+&gpio79_pins {
+	bias-disable;
+	input-disable;
+};
+
+&gpio80_pins {
+	bias-pull-up;
+	input-disable;
+};
+
+&gpio82_pins {
+	bias-pull-up;
+	input-disable;
+};
+
+&gpio84_pins {
+	bias-disable;
+	input-disable;
+};
+
+&gpio85_pins {
+	bias-pull-up;
+	input-disable;
+};
+
+&gpio94_pins {
+	bias-disable;
+	input-disable;
+};
+
+&gpio106_pins {
+	bias-disable;
+	input-disable;
+};
+
+&gpio111_pins {
+	bias-disable;
+	input-disable;
+};
+
+&pinctrl {
+	vrgmii-supply = <&vcc_1v8>;
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/eswin/eic7700-pinctrl.dtsi b/arch/riscv/boot/dts/eswin/eic7700-pinctrl.dtsi
new file mode 100644
index 000000000000..7293df146aa7
--- /dev/null
+++ b/arch/riscv/boot/dts/eswin/eic7700-pinctrl.dtsi
@@ -0,0 +1,888 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2025 Beijing ESWIN Computing Technology Co., Ltd.
+ *
+ * ESWIN's EIC7700 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ *
+ * Authors: Yulin Lu <luyulin@eswincomputing.com>
+ */
+
+&pinctrl{
+	default-pins-grp {
+		sata_act_led_pins: sata-act-led-pins{
+			pins = "gpio27";
+			function = "sata";
+		};
+
+		emmc_led_ctrl_pins: emmc-led-ctrl-pins {
+			pins = "gpio29";
+			function = "emmc";
+		};
+
+		sd0_led_ctrl_pins: sd0-led-ctrl-pins {
+			pins = "gpio34";
+			function = "sdio";
+		};
+
+		sd1_led_ctrl_pins: sd1-led-ctrl-pins {
+			pins = "spi1_d2";
+			function = "sdio";
+		};
+
+		i2c6_pins: i2c6-pins {
+			pins = "uart1_cts", "uart1_rts";
+			function = "i2c";
+		};
+
+		i2c7_pins: i2c7-pins {
+			pins = "uart2_tx", "uart2_rx";
+			function = "i2c";
+		};
+
+		i2c9_pins: i2c9-pins {
+			pins = "spi1_d0", "spi1_d1";
+			function = "i2c";
+		};
+
+		pwm1_pins: pwm1-pins {
+			pins = "spi1_d3";
+			function = "pwm";
+		};
+
+		pwm2_pins: pwm2-pins {
+			pins = "spi1_cs1_n";
+			function = "pwm";
+		};
+
+		mipi_csi_xtrig0_pins: mipi-csi-xtrig0-pins {
+			pins = "gpio92";
+			function = "mipi_csi";
+		};
+
+		mipi_csi_xtrig1_pins: mipi-csi-xtrig1-pins {
+			pins = "gpio93";
+			function = "mipi_csi";
+		};
+
+		dual_spi2_pins: dual-spi2-pins {
+			pins = "spi2_cs0_n", "jtag0_tck", "jtag0_tms", "jtag0_tdi";
+			function = "spi";
+		};
+
+		quad_spi2_pins: quad-spi2-pins {
+			pins = "spi2_cs0_n", "spi2_cs1_n", "jtag0_tck", "jtag0_tms",
+			       "jtag0_tdi", "jtag0_tdo", "gpio5";
+			function = "spi";
+		};
+
+		gpio1_pins: gpio1-pins {
+			pins = "jtag0_tck";
+			function = "gpio";
+		};
+
+		gpio2_pins: gpio2-pins {
+			pins = "jtag0_tms";
+			function = "gpio";
+		};
+
+		gpio3_pins: gpio3-pins {
+			pins = "jtag0_tdi";
+			function = "gpio";
+		};
+
+		gpio4_pins: gpio4-pins {
+			pins = "jtag0_tdo";
+			function = "gpio";
+		};
+
+		gpio6_pins: gpio6-pins {
+			pins = "spi2_cs0_n";
+			function = "gpio";
+		};
+
+		gpio7_pins: gpio7-pins {
+			pins = "jtag1_tck";
+			function = "gpio";
+		};
+
+		gpio8_pins: gpio8-pins {
+			pins = "jtag1_tms";
+			function = "gpio";
+		};
+
+		gpio9_pins: gpio9-pins {
+			pins = "jtag1_tdi";
+			function = "gpio";
+		};
+
+		gpio10_pins: gpio10-pins {
+			pins = "jtag1_tdo";
+			function = "gpio";
+		};
+
+		gpio12_pins: gpio12-pins {
+			pins = "spi2_cs1_n";
+			function = "gpio";
+		};
+
+		gpio13_pins: gpio13-pins {
+			pins = "mode_set0";
+			function = "gpio";
+		};
+
+		gpio14_pins: gpio14-pins {
+			pins = "mode_set1";
+			function = "gpio";
+		};
+
+		gpio15_pins: gpio15-pins {
+			pins = "mode_set2";
+			function = "gpio";
+		};
+
+		gpio16_pins: gpio16-pins {
+			pins = "mode_set3";
+			function = "gpio";
+		};
+
+		gpio17_pins: gpio17-pins {
+			pins = "jtag2_trst";
+			function = "gpio";
+		};
+
+		gpio18_pins: gpio18-pins {
+			pins = "i2s0_bclk";
+			function = "gpio";
+		};
+
+		gpio19_pins: gpio19-pins {
+			pins = "i2s0_wclk";
+			function = "gpio";
+		};
+
+		gpio20_pins: gpio20-pins {
+			pins = "i2s0_sdi";
+			function = "gpio";
+		};
+
+		gpio21_pins: gpio21-pins {
+			pins = "i2s0_sdo";
+			function = "gpio";
+		};
+
+		gpio22_pins: gpio22-pins {
+			pins = "i2s_mclk";
+			function = "gpio";
+		};
+
+		gpio23_pins: gpio23-pins {
+			pins = "i2s2_bclk";
+			function = "gpio";
+		};
+
+		gpio24_pins: gpio24-pins {
+			pins = "i2s2_wclk";
+			function = "gpio";
+		};
+
+		gpio25_pins: gpio25-pins {
+			pins = "i2s2_sdi";
+			function = "gpio";
+		};
+
+		gpio26_pins: gpio26-pins {
+			pins = "i2s2_sdo";
+			function = "gpio";
+		};
+
+		gpio29_pins: gpio29-pins {
+			pins = "gpio29";
+			function = "gpio";
+		};
+
+		gpio30_pins: gpio30-pins {
+			pins = "i2s1_bclk";
+			function = "gpio";
+		};
+
+		gpio31_pins: gpio31-pins {
+			pins = "i2s1_wclk";
+			function = "gpio";
+		};
+
+		gpio32_pins: gpio32-pins {
+			pins = "i2s1_sdi";
+			function = "gpio";
+		};
+
+		gpio33_pins: gpio33-pins {
+			pins = "i2s1_sdo";
+			function = "gpio";
+		};
+
+		gpio34_pins: gpio34-pins {
+			pins = "gpio34";
+			function = "gpio";
+		};
+
+		gpio35_pins: gpio35-pins {
+			pins = "spi1_cs0_n";
+			function = "gpio";
+		};
+
+		gpio36_pins: gpio36-pins {
+			pins = "spi1_clk";
+			function = "gpio";
+		};
+
+		gpio37_pins: gpio37-pins {
+			pins = "spi1_d0";
+			function = "gpio";
+		};
+
+		gpio38_pins: gpio38-pins {
+			pins = "spi1_d1";
+			function = "gpio";
+		};
+
+		gpio39_pins: gpio39-pins {
+			pins = "spi1_d2";
+			function = "gpio";
+		};
+
+		gpio40_pins: gpio40-pins {
+			pins = "spi1_d3";
+			function = "gpio";
+		};
+
+		gpio41_pins: gpio41-pins {
+			pins = "spi1_cs1_n";
+			function = "gpio";
+		};
+
+		gpio42_pins: gpio42-pins {
+			pins = "usb0_pwren";
+			function = "gpio";
+		};
+
+		gpio43_pins: gpio43-pins {
+			pins = "usb1_pwren";
+			function = "gpio";
+		};
+
+		gpio44_pins: gpio44-pins {
+			pins = "i2c0_scl";
+			function = "gpio";
+		};
+
+		gpio45_pins: gpio45-pins {
+			pins = "i2c0_sda";
+			function = "gpio";
+		};
+
+		gpio46_pins: gpio46-pins {
+			pins = "i2c1_scl";
+			function = "gpio";
+		};
+
+		gpio47_pins: gpio47-pins {
+			pins = "i2c1_sda";
+			function = "gpio";
+		};
+
+		gpio48_pins: gpio48-pins {
+			pins = "i2c2_scl";
+			function = "gpio";
+		};
+
+		gpio49_pins: gpio49-pins {
+			pins = "i2c2_sda";
+			function = "gpio";
+		};
+
+		gpio50_pins: gpio50-pins {
+			pins = "i2c3_scl";
+			function = "gpio";
+		};
+
+		gpio51_pins: gpio51-pins {
+			pins = "i2c3_sda";
+			function = "gpio";
+		};
+
+		gpio52_pins: gpio52-pins {
+			pins = "i2c4_scl";
+			function = "gpio";
+		};
+
+		gpio53_pins: gpio53-pins {
+			pins = "i2c4_sda";
+			function = "gpio";
+		};
+
+		gpio54_pins: gpio54-pins {
+			pins = "i2c5_scl";
+			function = "gpio";
+		};
+
+		gpio55_pins: gpio55-pins {
+			pins = "i2c5_sda";
+			function = "gpio";
+		};
+
+		gpio56_pins: gpio56-pins {
+			pins = "uart0_tx";
+			function = "gpio";
+		};
+
+		gpio57_pins: gpio57-pins {
+			pins = "uart0_rx";
+			function = "gpio";
+		};
+
+		gpio58_pins: gpio58-pins {
+			pins = "uart1_tx";
+			function = "gpio";
+		};
+
+		gpio59_pins: gpio59-pins {
+			pins = "uart1_rx";
+			function = "gpio";
+		};
+
+		gpio60_pins: gpio60-pins {
+			pins = "uart1_cts";
+			function = "gpio";
+		};
+
+		gpio61_pins: gpio61-pins {
+			pins = "uart1_rts";
+			function = "gpio";
+		};
+
+		gpio62_pins: gpio62-pins {
+			pins = "uart2_tx";
+			function = "gpio";
+		};
+
+		gpio63_pins: gpio63-pins {
+			pins = "uart2_rx";
+			function = "gpio";
+		};
+
+		gpio64_pins: gpio64-pins {
+			pins = "jtag2_tck";
+			function = "gpio";
+		};
+
+		gpio65_pins: gpio65-pins {
+			pins = "jtag2_tms";
+			function = "gpio";
+		};
+
+		gpio66_pins: gpio66-pins {
+			pins = "jtag2_tdi";
+			function = "gpio";
+		};
+
+		gpio67_pins: gpio67-pins {
+			pins = "jtag2_tdo";
+			function = "gpio";
+		};
+
+		gpio68_pins: gpio68-pins {
+			pins = "fan_pwm";
+			function = "gpio";
+		};
+
+		gpio69_pins: gpio69-pins {
+			pins = "fan_tach";
+			function = "gpio";
+		};
+
+		gpio70_pins: gpio70-pins {
+			pins = "mipi_csi0_xvs";
+			function = "gpio";
+		};
+
+		gpio71_pins: gpio71-pins {
+			pins = "mipi_csi0_xhs";
+			function = "gpio";
+		};
+
+		gpio72_pins: gpio72-pins {
+			pins = "mipi_csi0_mclk";
+			function = "gpio";
+		};
+
+		gpio73_pins: gpio73-pins {
+			pins = "mipi_csi1_xvs";
+			function = "gpio";
+		};
+
+		gpio74_pins: gpio74-pins {
+			pins = "mipi_csi1_xhs";
+			function = "gpio";
+		};
+
+		gpio75_pins: gpio75-pins {
+			pins = "mipi_csi1_mclk";
+			function = "gpio";
+		};
+
+		gpio76_pins: gpio76-pins {
+			pins = "mipi_csi2_xvs";
+			function = "gpio";
+		};
+
+		gpio77_pins: gpio77-pins {
+			pins = "mipi_csi2_xhs";
+			function = "gpio";
+		};
+
+		gpio78_pins: gpio78-pins {
+			pins = "mipi_csi2_mclk";
+			function = "gpio";
+		};
+
+		gpio79_pins: gpio79-pins {
+			pins = "mipi_csi3_xvs";
+			function = "gpio";
+		};
+
+		gpio80_pins: gpio80-pins {
+			pins = "mipi_csi3_xhs";
+			function = "gpio";
+		};
+
+		gpio81_pins: gpio81-pins {
+			pins = "mipi_csi3_mclk";
+			function = "gpio";
+		};
+
+		gpio82_pins: gpio82-pins {
+			pins = "mipi_csi4_xvs";
+			function = "gpio";
+		};
+
+		gpio83_pins: gpio83-pins {
+			pins = "mipi_csi4_xhs";
+			function = "gpio";
+		};
+
+		gpio84_pins: gpio84-pins {
+			pins = "mipi_csi4_mclk";
+			function = "gpio";
+		};
+
+		gpio85_pins: gpio85-pins {
+			pins = "mipi_csi5_xvs";
+			function = "gpio";
+		};
+
+		gpio86_pins: gpio86-pins {
+			pins = "mipi_csi5_xhs";
+			function = "gpio";
+		};
+
+		gpio87_pins: gpio87-pins {
+			pins = "mipi_csi5_mclk";
+			function = "gpio";
+		};
+
+		gpio88_pins: gpio88-pins {
+			pins = "spi3_cs_n";
+			function = "gpio";
+		};
+
+		gpio89_pins: gpio89-pins {
+			pins = "spi3_clk";
+			function = "gpio";
+		};
+
+		gpio90_pins: gpio90-pins {
+			pins = "spi3_di";
+			function = "gpio";
+		};
+
+		gpio91_pins: gpio91-pins {
+			pins = "spi3_do";
+			function = "gpio";
+		};
+
+		gpio92_pins: gpio92-pins {
+			pins = "gpio92";
+			function = "gpio";
+		};
+
+		gpio93_pins: gpio93-pins {
+			pins = "gpio93";
+			function = "gpio";
+		};
+
+		gpio94_pins: gpio94-pins {
+			pins = "s_mode";
+			function = "gpio";
+		};
+
+		gpio95_pins: gpio95-pins {
+			pins = "gpio95";
+			function = "gpio";
+		};
+
+		gpio96_pins: gpio96-pins {
+			pins = "spi0_cs_n";
+			function = "gpio";
+		};
+
+		gpio97_pins: gpio97-pins {
+			pins = "spi0_clk";
+			function = "gpio";
+		};
+
+		gpio98_pins: gpio98-pins {
+			pins = "spi0_d0";
+			function = "gpio";
+		};
+
+		gpio99_pins: gpio99-pins {
+			pins = "spi0_d1";
+			function = "gpio";
+		};
+
+		gpio100_pins: gpio100-pins {
+			pins = "spi0_d2";
+			function = "gpio";
+		};
+
+		gpio101_pins: gpio101-pins {
+			pins = "spi0_d3";
+			function = "gpio";
+		};
+
+		gpio102_pins: gpio102-pins {
+			pins = "i2c10_scl";
+			function = "gpio";
+		};
+
+		gpio103_pins: gpio103-pins {
+			pins = "i2c10_sda";
+			function = "gpio";
+		};
+
+		gpio104_pins: gpio104-pins {
+			pins = "i2c11_scl";
+			function = "gpio";
+		};
+
+		gpio105_pins: gpio105-pins {
+			pins = "i2c11_sda";
+			function = "gpio";
+		};
+
+		gpio107_pins: gpio107-pins {
+			pins = "boot_sel0";
+			function = "gpio";
+		};
+
+		gpio108_pins: gpio108-pins {
+			pins = "boot_sel1";
+			function = "gpio";
+		};
+
+		gpio109_pins: gpio109-pins {
+			pins = "boot_sel2";
+			function = "gpio";
+		};
+
+		gpio110_pins: gpio110-pins {
+			pins = "boot_sel3";
+			function = "gpio";
+		};
+
+		uart3_pins: uart3-pins {
+			pins = "gpio92", "gpio93";
+			function = "uart";
+		};
+
+		uart4_pins: uart4-pins {
+			pins = "spi1_d0", "spi1_d1";
+			function = "uart";
+		};
+
+		gpio0_pins: gpio0-pins {
+			pins = "gpio0";
+			function = "gpio";
+		};
+
+		gpio5_pins: gpio5-pins {
+			pins = "gpio5";
+			function = "gpio";
+		};
+
+		gpio11_pins: gpio11-pins {
+			pins = "gpio11";
+			function = "gpio";
+		};
+
+		gpio27_pins: gpio27-pins {
+			pins = "gpio27";
+			function = "gpio";
+		};
+
+		gpio28_pins: gpio28-pins {
+			pins = "gpio28";
+			function = "gpio";
+		};
+
+		gpio106_pins: gpio106-pins {
+			pins = "gpio106";
+			function = "gpio";
+		};
+
+		gpio111_pins: gpio111-pins {
+			pins = "gpio111";
+			function = "gpio";
+		};
+
+		chip_mode_pins: chip-mode-pins {
+			pins = "chip_mode";
+			function = "chip_mode";
+		};
+
+		sdio0_pins: sdio0-pins {
+			pins = "mode_set0", "mode_set1";
+			function = "sdio";
+		};
+
+		sdio1_pins: sdio1-pins {
+			pins = "mode_set2", "mode_set3";
+			function = "sdio";
+		};
+
+		jtag0_pins: jtag0-pins {
+			pins = "jtag0_tck", "jtag0_tms", "jtag0_tdi", "jtag0_tdo";
+			function = "jtag";
+		};
+
+		jtag1_pins: jtag1-pins {
+			pins = "jtag1_tck", "jtag1_tms", "jtag1_tdi", "jtag1_tdo";
+			function = "jtag";
+		};
+
+		jtag2_pins: jtag2-pins {
+			pins = "jtag2_trst", "jtag2_tck", "jtag2_tms", "jtag2_tdi",
+			       "jtag2_tdo";
+			function = "jtag";
+		};
+
+		pcie_pins: pcie-pins {
+			pins = "pcie_clkreq_n", "pcie_wake_n", "pcie_perst_n";
+			function = "pcie";
+		};
+
+		hdmi_pins: hdmi-pins {
+			pins = "hdmi_scl", "hdmi_sda", "hdmi_cec";
+			function = "hdmi";
+		};
+
+		rgmii0_pins: rgmii0-pins {
+			pins = "rgmii0_clk_125", "rgmii0_txen", "rgmii0_txclk", "rgmii0_txd0",
+			       "rgmii0_txd1", "rgmii0_txd2", "rgmii0_txd3", "rgmii0_rxclk",
+			       "rgmii0_rxdv", "rgmii0_rxd0", "rgmii0_rxd1", "rgmii0_rxd2",
+			       "rgmii0_rxd3", "rgmii0_mdc", "rgmii0_mdio", "rgmii0_intb";
+			function = "hdmi";
+		};
+
+		rgmii1_pins: rgmii1-pins {
+			pins = "rgmii1_clk_125", "rgmii1_txen", "rgmii1_txclk", "rgmii1_txd0",
+			       "rgmii1_txd1", "rgmii1_txd2", "rgmii1_txd3", "rgmii1_rxclk",
+			       "rgmii1_rxdv", "rgmii1_rxd0", "rgmii1_rxd1", "rgmii1_rxd2",
+			       "rgmii1_rxd3", "rgmii1_mdc", "rgmii1_mdio", "rgmii1_intb";
+			function = "hdmi";
+		};
+
+		i2s0_pins: i2s0-pins {
+			pins = "i2s0_bclk", "i2s0_wclk", "i2s0_sdi", "i2s0_sdo", "i2s_mclk";
+			function = "hdmi";
+		};
+
+		i2s1_pins: i2s1-pins {
+			pins = "i2s1_bclk", "i2s1_wclk", "i2s1_sdi", "i2s1_sdo", "i2s_mclk";
+			function = "hdmi";
+		};
+
+		i2s2_pins: i2s2-pins {
+			pins = "i2s2_bclk", "i2s2_wclk", "i2s2_sdi", "i2s2_sdo", "i2s_mclk";
+			function = "hdmi";
+		};
+
+		usb0_pwren_pins: usb0-pwren-pins {
+			pins = "usb0_pwren";
+			function = "usb";
+		};
+
+		usb1_pwren_pins: usb1-pwren-pins {
+			pins = "usb1_pwren";
+			function = "usb";
+		};
+
+		i2c0_pins: i2c0-pins {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c";
+		};
+
+		i2c1_pins: i2c1-pins {
+			pins = "i2c1_scl", "i2c1_sda";
+			function = "i2c";
+		};
+
+		i2c2_pins: i2c2-pins {
+			pins = "i2c2_scl", "i2c2_sda";
+			function = "i2c";
+		};
+
+		i2c3_pins: i2c3-pins {
+			pins = "i2c3_scl", "i2c3_sda";
+			function = "i2c";
+		};
+
+		i2c4_pins: i2c4-pins {
+			pins = "i2c4_scl", "i2c4_sda";
+			function = "i2c";
+		};
+
+		i2c5_pins: i2c5-pins {
+			pins = "i2c5_scl", "i2c5_sda";
+			function = "i2c";
+		};
+
+		i2c8_pins: i2c8-pins {
+			pins = "gpio92", "gpio93";
+			function = "i2c";
+		};
+
+		i2c10_pins: i2c10-pins {
+			pins = "i2c10_scl", "i2c10_sda";
+			function = "i2c";
+		};
+
+		i2c11_pins: i2c11-pins {
+			pins = "i2c11_scl", "i2c11_sda";
+			function = "i2c";
+		};
+
+		uart0_pins: uart0-pins {
+			pins = "uart0_tx", "uart0_rx";
+			function = "uart";
+		};
+
+		uart1_pins: uart1-pins {
+			pins = "uart1_tx", "uart1_rx", "uart1_cts", "uart1_rts";
+			function = "uart";
+		};
+
+		uart2_pins: uart2-pins {
+			pins = "uart2_tx", "uart2_rx";
+			function = "uart";
+		};
+
+		fan_pwm_pins: fan-pwm-pins {
+			pins = "fan_pwm";
+			function = "pwm";
+		};
+
+		fan_tach_pins: fan-tach-pins {
+			pins = "fan_tach";
+			function = "fan_tach";
+		};
+
+		mipi_csi0_pins: mipi-csi0-pins {
+			pins = "mipi_csi0_xvs", "mipi_csi0_xhs", "mipi_csi0_mclk";
+			function = "mipi_csi";
+		};
+
+		mipi_csi1_pins: mipi-csi1-pins {
+			pins = "mipi_csi1_xvs", "mipi_csi1_xhs", "mipi_csi1_mclk";
+			function = "mipi_csi";
+		};
+
+		mipi_csi2_pins: mipi-csi2-pins {
+			pins = "mipi_csi2_xvs", "mipi_csi2_xhs", "mipi_csi2_mclk";
+			function = "mipi_csi";
+		};
+
+		mipi_csi3_pins: mipi-csi3-pins {
+			pins = "mipi_csi3_xvs", "mipi_csi3_xhs", "mipi_csi3_mclk";
+			function = "mipi_csi";
+		};
+
+		mipi_csi4_pins: mipi-csi4-pins {
+			pins = "mipi_csi4_xvs", "mipi_csi4_xhs", "mipi_csi4_mclk";
+			function = "mipi_csi";
+		};
+
+		mipi_csi5_pins: mipi-csi5-pins {
+			pins = "mipi_csi5_xvs", "mipi_csi5_xhs", "mipi_csi5_mclk";
+			function = "mipi_csi";
+		};
+
+		s_mode_pins: s-mode-pins {
+			pins = "s_mode";
+			function = "s_mode";
+		};
+
+		boot_sel0_pins: boot-sel0-pins {
+			pins = "boot_sel0";
+			function = "boot_sel";
+		};
+
+		boot_sel1_pins: boot-sel1-pins {
+			pins = "boot_sel1";
+			function = "boot_sel";
+		};
+
+		boot_sel2_pins: boot-sel2-pins {
+			pins = "boot_sel2";
+			function = "boot_sel";
+		};
+
+		boot_sel3_pins: boot-sel3-pins {
+			pins = "boot_sel3";
+			function = "boot_sel";
+		};
+
+		ddr_ref_clk_sel_pins: ddr-ref-clk-sel-pins {
+			pins = "gpio95";
+			function = "ddr_ref_clk_sel";
+		};
+
+		lpddr_ref_clk_pins: lpddr-ref-clk-pins {
+			pins = "lpddr_ref_clk";
+			function = "lpddr_ref_clk";
+		};
+
+		spi0_pins: spi0-pins {
+			pins = "spi0_cs_n", "spi0_clk", "spi0_d0", "spi0_d1", "spi0_d2",
+			       "spi0_d3";
+			function = "spi";
+		};
+
+		dual_spi1_pins: dual-spi1-pins {
+			pins = "spi1_cs0_n", "spi1_clk", "spi1_d0", "spi1_d1";
+			function = "spi";
+		};
+
+		quad_spi1_pins: quad-spi1-pins {
+			pins = "spi1_cs0_n", "spi1_cs1_n", "spi1_clk", "spi1_d0", "spi1_d1",
+			       "spi1_d2", "spi1_d3";
+			function = "spi";
+		};
+
+		spi3_pins: spi3-pins {
+			pins = "spi3_cs_n", "spi3_clk", "spi3_di", "spi3_do";
+			function = "spi";
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/eswin/eic7700.dtsi b/arch/riscv/boot/dts/eswin/eic7700.dtsi
index a7ebb1115958..8798c50f7584 100644
--- a/arch/riscv/boot/dts/eswin/eic7700.dtsi
+++ b/arch/riscv/boot/dts/eswin/eic7700.dtsi
@@ -349,6 +349,11 @@ gpioD: gpio-port@3 {
 			};
 		};
 
+		pinctrl: pinctrl@51600080 {
+			compatible = "eswin,eic7700-pinctrl";
+			reg = <0x0 0x51600080 0x0 0x1fff80>;
+		};
+
 		clk: clock-controller@51828000 {
 			compatible = "eswin,eic7700-clock";
 			reg = <0x0 0x51828000 0x0 0x300>;
-- 
2.34.1

[PATCH 4/7] dt-bindings: mfd: syscon: add ESWIN EIC7700 compatible

[Pinkesh Vaghela]

Document ESWIN EIC7700 SoC compatible for syscon registers.

Signed-off-by: Pinkesh Vaghela <pinkesh.vaghela@einfochips.com>
---
 Documentation/devicetree/bindings/mfd/syscon.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index e22867088063..7d3365601249 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -62,6 +62,7 @@ select:
           - cirrus,ep7209-syscon3
           - cnxt,cx92755-uc
           - econet,en751221-chip-scu
+          - eswin,eic7700-syscfg
           - freecom,fsg-cs2-system-controller
           - fsl,imx93-aonmix-ns-syscfg
           - fsl,imx93-wakeupmix-syscfg
@@ -175,6 +176,7 @@ properties:
               - cirrus,ep7209-syscon3
               - cnxt,cx92755-uc
               - econet,en751221-chip-scu
+              - eswin,eic7700-syscfg
               - freecom,fsg-cs2-system-controller
               - fsl,imx93-aonmix-ns-syscfg
               - fsl,imx93-wakeupmix-syscfg
-- 
2.34.1

[PATCH 5/7] riscv: dts: eswin: add hsp power domain

[Pinkesh Vaghela]

HSP CSR is inside the HSP power domain. HSP CFG clock must be enabled
to access the HSP CSR registers.
Add HSP power domain node to manage hsp cfg clock

Signed-off-by: Pinkesh Vaghela <pinkesh.vaghela@einfochips.com>
---
 arch/riscv/boot/dts/eswin/eic7700.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/riscv/boot/dts/eswin/eic7700.dtsi b/arch/riscv/boot/dts/eswin/eic7700.dtsi
index 8798c50f7584..f8caf39616b2 100644
--- a/arch/riscv/boot/dts/eswin/eic7700.dtsi
+++ b/arch/riscv/boot/dts/eswin/eic7700.dtsi
@@ -252,6 +252,19 @@ plic: interrupt-controller@c000000 {
 			#interrupt-cells = <1>;
 		};
 
+		hsp_power_domain: bus@50400000 {
+			compatible = "simple-pm-bus";
+			ranges = <0x0 0x50400000 0x0 0x50400000 0x0 0xa0000>;
+			clocks = <&clk EIC7700_CLK_GATE_HSP_CFG_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+
+			hsp_sp_csr: hsp-sp-top-csr@50440000 {
+				compatible = "eswin,eic7700-syscfg", "syscon";
+				reg = <0x0 0x50440000 0x0 0x2000>;
+			};
+		};
+
 		uart0: serial@50900000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x50900000 0x0 0x10000>;
-- 
2.34.1

[PATCH 6/7] riscv: dts: eswin: add I2C controller support

[Pinkesh Vaghela]

From: Pritesh Patel <pritesh.patel@einfochips.com>

Add I2C nodes for EIC7700 SoC.
Also add nodes for corresponding slave devices in dts file and
enable them for HiFive Premier P550 board

Signed-off-by: Pritesh Patel <pritesh.patel@einfochips.com>
Signed-off-by: Pinkesh Vaghela <pinkesh.vaghela@einfochips.com>
---
 .../dts/eswin/eic7700-hifive-premier-p550.dts |  52 ++++++
 arch/riscv/boot/dts/eswin/eic7700.dtsi        | 156 ++++++++++++++++++
 2 files changed, 208 insertions(+)

diff --git a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
index e7bb96e14958..0f0c98474c62 100644
--- a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
+++ b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
@@ -130,6 +130,58 @@ &gpio111_pins {
 	input-disable;
 };
 
+&aon_i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+};
+
+&aon_i2c1 {
+	status = "okay";
+
+	pac1934@10 {
+		compatible = "microchip,pac1934";
+		reg = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <0x1>;
+			shunt-resistor-micro-ohms = <1000>;
+			label = "VDD_SOM";
+		};
+
+		channel@2 {
+			reg = <0x2>;
+			shunt-resistor-micro-ohms = <1000>;
+			label = "VDD_SOC";
+		};
+
+		channel@3 {
+			reg = <0x3>;
+			shunt-resistor-micro-ohms = <1000>;
+			label = "VDD_CPU";
+		};
+
+		channel@4 {
+			reg = <0x4>;
+			shunt-resistor-micro-ohms = <1000>;
+			label = "VDD_LPDDR";
+		};
+	};
+
+	ina226@44 {
+		compatible = "ti,ina226";
+		reg = <0x44>;
+		#io-channel-cells = <1>;
+		label = "sys_power";
+		shunt-resistor = <1000>;
+	};
+};
+
 &pinctrl {
 	vrgmii-supply = <&vcc_1v8>;
 };
diff --git a/arch/riscv/boot/dts/eswin/eic7700.dtsi b/arch/riscv/boot/dts/eswin/eic7700.dtsi
index f8caf39616b2..28706431b2c0 100644
--- a/arch/riscv/boot/dts/eswin/eic7700.dtsi
+++ b/arch/riscv/boot/dts/eswin/eic7700.dtsi
@@ -315,6 +315,162 @@ uart4: serial@50940000 {
 			status = "disabled";
 		};
 
+		i2c0: i2c@50950000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x50950000 0x0 0x8000>;
+			interrupts = <105>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C0_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@50960000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x50960000 0x0 0x8000>;
+			interrupts = <106>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C1_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@50970000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x50970000 0x0 0x8000>;
+			interrupts = <107>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C2_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@50980000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x50980000 0x0 0x8000>;
+			interrupts = <108>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C3_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@50990000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x50990000 0x0 0x8000>;
+			interrupts = <109>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C4_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@509a0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x509a0000 0x0 0x8000>;
+			interrupts = <110>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C5_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@509b0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x509b0000 0x0 0x8000>;
+			interrupts = <111>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C6_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@509c0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x509c0000 0x0 0x8000>;
+			interrupts = <112>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C7_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c8: i2c@509d0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x509d0000 0x0 0x8000>;
+			interrupts = <113>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C8_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c9: i2c@509e0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x509e0000 0x0 0x8000>;
+			interrupts = <114>;
+			clocks = <&clk EIC7700_CLK_GATE_LSP_I2C9_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_I2C9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		aon_i2c0: i2c@51830000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x51830000 0x0 0x8000>;
+			interrupts = <290>;
+			clocks = <&clk EIC7700_CLK_GATE_AON_I2C0_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_ANO0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		aon_i2c1: i2c@51838000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x51838000 0x0 0x8000>;
+			interrupts = <291>;
+			clocks = <&clk EIC7700_CLK_GATE_AON_I2C1_PCLK>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			resets = <&reset EIC7700_RESET_ANO1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		gpio@51600000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0x0 0x51600000 0x0 0x80>;
-- 
2.34.1

[PATCH 7/7] riscv: dts: eswin: add watchdog support

[Pinkesh Vaghela]

From: Pritesh Patel <pritesh.patel@einfochips.com>

Add watchdog node for ESWIN EIC7700 SoC and enable them for HiFive
Premier P550 board

Signed-off-by: Pritesh Patel <pritesh.patel@einfochips.com>
Signed-off-by: Pinkesh Vaghela <pinkesh.vaghela@einfochips.com>
---
 .../dts/eswin/eic7700-hifive-premier-p550.dts | 16 ++++++++
 arch/riscv/boot/dts/eswin/eic7700.dtsi        | 40 +++++++++++++++++++
 2 files changed, 56 insertions(+)

diff --git a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
index 0f0c98474c62..a188a5e1d526 100644
--- a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
+++ b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
@@ -193,3 +193,19 @@ &uart0 {
 &uart2 {
 	status = "okay";
 };
+
+&wdt0 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&wdt3 {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/eswin/eic7700.dtsi b/arch/riscv/boot/dts/eswin/eic7700.dtsi
index 28706431b2c0..a59a9932be0b 100644
--- a/arch/riscv/boot/dts/eswin/eic7700.dtsi
+++ b/arch/riscv/boot/dts/eswin/eic7700.dtsi
@@ -265,6 +265,46 @@ hsp_sp_csr: hsp-sp-top-csr@50440000 {
 			};
 		};
 
+		wdt0: watchdog@50800000 {
+			compatible = "snps,dw-wdt";
+			reg = <0x0 0x50800000 0x0 0x4000>;
+			interrupts = <87>;
+			clocks =<&clk EIC7700_CLK_GATE_LSP_WDT0_PCLK>;
+			clock-names = "tclk";
+			resets = <&reset EIC7700_RESET_WDT0>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@50804000 {
+			compatible = "snps,dw-wdt";
+			reg = <0x0 0x50804000 0x0 0x4000>;
+			interrupts = <88>;
+			clocks =<&clk EIC7700_CLK_GATE_LSP_WDT1_PCLK>;
+			clock-names = "tclk";
+			resets = <&reset EIC7700_RESET_WDT1>;
+			status = "disabled";
+		};
+
+		wdt2: watchdog@50808000 {
+			compatible = "snps,dw-wdt";
+			reg = <0x0 0x50808000 0x0 0x4000>;
+			interrupts = <89>;
+			clocks =<&clk EIC7700_CLK_GATE_LSP_WDT2_PCLK>;
+			clock-names = "tclk";
+			resets = <&reset EIC7700_RESET_WDT2>;
+			status = "disabled";
+		};
+
+		wdt3: watchdog@5080c000 {
+			compatible = "snps,dw-wdt";
+			reg = <0x0 0x5080c000 0x0 0x4000>;
+			interrupts = <90>;
+			clocks =<&clk EIC7700_CLK_GATE_LSP_WDT3_PCLK>;
+			clock-names = "tclk";
+			resets = <&reset EIC7700_RESET_WDT3>;
+			status = "disabled";
+		};
+
 		uart0: serial@50900000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x50900000 0x0 0x10000>;
-- 
2.34.1

Re: [PATCH 2/7] riscv: dts: eswin: add clock generator for EIC7700 SoC

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] The fixed-clock node name 'oscillator' triggers a deprecated fallback in the fixed-clock schema.
--

commit cde88bbabc7fa6624be08081caf3200c1a962c33
Author: Pritesh Patel <pritesh.patel@einfochips.com>

riscv: dts: eswin: add clock generator for EIC7700 SoC

This commit adds a clock generator node for the EIC7700 SoC. It also adds a
fixed-clock node representing the 24MHz crystal oscillator on HiFive Premier
P550 boards.

> diff --git a/arch/riscv/boot/dts/eswin/eic7700.dtsi b/arch/riscv/boot/dts/eswin/eic7700.dtsi
> index 430a210f01e66..a7ebb11159580 100644
> --- a/arch/riscv/boot/dts/eswin/eic7700.dtsi
> +++ b/arch/riscv/boot/dts/eswin/eic7700.dtsi

[ ... ]

> @@ -203,6 +204,11 @@ pmu {
>  				<0x00000000 0x0000000f 0xfffffffc 0x000000ff 0x00000078>;
>  	};
>  
> +	xtal: oscillator {

[Severity: Low]
Does this node name trigger a deprecation warning during dtbs_check?

The fixed-clock device tree binding schema dictates that the preferred node
name should match the pattern ^clock-([0-9]+|[a-z0-9-]+)$. Naming the node
oscillator falls into the deprecated fallback branch. 

Should this be named something like clock-xtal or clock-24m instead to avoid
warnings?

> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
>  	};
>

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260615122016.1110206-1-pinkesh.vaghela@einfochips.com?part=2

Re: [PATCH 5/7] riscv: dts: eswin: add hsp power domain

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 2 potential issue(s) to consider:
- [High] The HSP CFG clock will never be enabled, causing a hardware hang during register access, because `simple-pm-bus` requires children to use `pm_runtime` but `syscon` bypasses it.
- [Medium] The node is labeled and described as a 'power domain' but is modeled as a simple bus without the ability to act as a power domain provider.
--

commit 0dad730760e600f73d118515b1907e14ac735dad
Author: Pinkesh Vaghela <pinkesh.vaghela@einfochips.com>

riscv: dts: eswin: add hsp power domain

This commit adds an HSP power domain node to manage the HSP CFG clock,
which is required to access the HSP CSR registers. The CSR is defined
as a syscon child node within a simple-pm-bus.

> diff --git a/arch/riscv/boot/dts/eswin/eic7700.dtsi b/arch/riscv/boot/dts/eswin/eic7700.dtsi
> --- a/arch/riscv/boot/dts/eswin/eic7700.dtsi
> +++ b/arch/riscv/boot/dts/eswin/eic7700.dtsi
> @@ -252,6 +252,19 @@ plic: interrupt-controller@c000000 {
>  			#interrupt-cells = <1>;
>  		};
>  
> +		hsp_power_domain: bus@50400000 {
> +			compatible = "simple-pm-bus";

[Severity: Medium]
The commit message and node label describe this as a power domain, but the
node uses simple-pm-bus and lacks a #power-domain-cells property. Can
other devices actually reference this as a power domain?

simple-pm-bus acts as a transparent bus for managing clocks or resets for
its direct children, rather than a genpd provider. If this is meant to act
as a power domain that other IP blocks depend on via power-domains = <...>,
does it need a dedicated driver and the #power-domain-cells property?

If it is strictly meant to manage the syscon clock, should the wrapper be
removed entirely?

> +			ranges = <0x0 0x50400000 0x0 0x50400000 0x0 0xa0000>;
> +			clocks = <&clk EIC7700_CLK_GATE_HSP_CFG_CLK>;

[Severity: High]
Since the child node uses the generic syscon compatible, will this clock
ever be enabled?

The syscon framework in drivers/mfd/syscon.c does not register a platform
driver, does not probe a device, and does not invoke pm_runtime_get_sync().
Because the child device is never probed or runtime-resumed, the parent
simple-pm-bus will remain suspended.

Would this cause a system hang when accessing the syscon registers since
the clock would remain disabled?

Additionally, of_syscon_register() natively expects the clocks property to
be directly in the syscon node. Should the clocks property be moved to the
hsp_sp_csr node and the simple-pm-bus wrapper removed?

> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +
> +			hsp_sp_csr: hsp-sp-top-csr@50440000 {
> +				compatible = "eswin,eic7700-syscfg", "syscon";
> +				reg = <0x0 0x50440000 0x0 0x2000>;
> +			};
> +		};
> +
>  		uart0: serial@50900000 {
>  			compatible = "snps,dw-apb-uart";
>  			reg = <0x0 0x50900000 0x0 0x10000>;

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260615122016.1110206-1-pinkesh.vaghela@einfochips.com?part=5

Re: [PATCH 3/7] riscv: dts: eswin: eic7700: add pinctrl support

[sashiko-bot]

Thank you for your contribution! Sashiko AI review found 4 potential issue(s) to consider:
- [High] Dead Code / Missing Pinctrl Hogs
- [High] Invalid Pin Mux Function / Copy-Paste Error
- [High] Missing GPIO to Pinctrl Mapping
- [Low] Device Tree Standard Compliance
--

commit 7180be18ad292ee17c6b942dc71e252ce0fdbeef
Author: Yulin Lu <luyulin@eswincomputing.com>

riscv: dts: eswin: eic7700: add pinctrl support

Add pinctrl node and related pin configuration for EIC7700 SoC.

> diff --git a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
> index 1fb92f0e7c550..e7bb96e149585 100644
> --- a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
> +++ b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
> @@ -18,6 +19,15 @@ aliases {
>  	chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
> +
> +	vcc_1v8: vcc1v8 {
> +		 compatible = "regulator-fixed";

[Severity: Low]
Should this node be named using the generic regulator-* pattern (such as
regulator-1v8) to avoid dtbs_check warnings for deprecated names?

There is also an extra leading space on the properties within this node
that deviates from standard spacing.

> +		 regulator-name = "vcc1v8";
> +		 regulator-always-on;
> +		 regulator-boot-on;
> +		 regulator-min-microvolt = <1800000>;
> +		 regulator-max-microvolt = <1800000>;
> +	 };
>  };

[ ... ]

> @@ -25,6 +35,105 @@ &xtal {
>  	clock-output-names = "xtal24m";
>  };
>  
> +&gpio0_pins {
> +	bias-disable;
> +	input-enable;
> +};

[Severity: High]
Will these pin configuration overrides be silently ignored by the pinctrl
core during boot?

Since these pin definitions are not referenced by a pinctrl-0 property in
an active device node, and are not configured as pinctrl hogs in the provider,
the intended hardware states for these pins will not be programmed.

[ ... ]

> diff --git a/arch/riscv/boot/dts/eswin/eic7700-pinctrl.dtsi b/arch/riscv/boot/dts/eswin/eic7700-pinctrl.dtsi
> new file mode 100644
> index 0000000000000..7293df146aa7b
> --- /dev/null
> +++ b/arch/riscv/boot/dts/eswin/eic7700-pinctrl.dtsi
> @@ -0,0 +1,888 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)

[ ... ]

> +		hdmi_pins: hdmi-pins {
> +			pins = "hdmi_scl", "hdmi_sda", "hdmi_cec";
> +			function = "hdmi";
> +		};
> +
> +		rgmii0_pins: rgmii0-pins {
> +			pins = "rgmii0_clk_125", "rgmii0_txen", "rgmii0_txclk", "rgmii0_txd0",
> +			       "rgmii0_txd1", "rgmii0_txd2", "rgmii0_txd3", "rgmii0_rxclk",
> +			       "rgmii0_rxdv", "rgmii0_rxd0", "rgmii0_rxd1", "rgmii0_rxd2",
> +			       "rgmii0_rxd3", "rgmii0_mdc", "rgmii0_mdio", "rgmii0_intb";
> +			function = "hdmi";
> +		};

[Severity: High]
Is the hdmi function correct for this network pin group?

It appears that rgmii0, rgmii1, and the i2s pin groups that follow all use
the hdmi function. This will prevent the pin controller from routing these
pins properly, likely leading to driver probe failures when peripherals
attempt to request them.

[ ... ]

> diff --git a/arch/riscv/boot/dts/eswin/eic7700.dtsi b/arch/riscv/boot/dts/eswin/eic7700.dtsi
> index a7ebb11159580..8798c50f7584d 100644
> --- a/arch/riscv/boot/dts/eswin/eic7700.dtsi
> +++ b/arch/riscv/boot/dts/eswin/eic7700.dtsi
> @@ -349,6 +349,11 @@ gpioD: gpio-port@3 {
>  			};
>  		};
>  
> +		pinctrl: pinctrl@51600080 {
> +			compatible = "eswin,eic7700-pinctrl";
> +			reg = <0x0 0x51600080 0x0 0x1fff80>;
> +		};
> +

[Severity: High]
Should the existing gpio controller nodes (gpioA, gpioB, gpioC, and gpioD)
be updated with a gpio-ranges property mapping to this new pinctrl provider?

Without gpio-ranges, the GPIO subsystem cannot translate GPIO offsets into
pinctrl pins. The pinctrl core's .gpio_request_enable callback will not be
invoked when a software component requests a GPIO dynamically, preventing
the multiplexer from automatically switching the pin to GPIO mode.

>  		clk: clock-controller@51828000 {
>  			compatible = "eswin,eic7700-clock";

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260615122016.1110206-1-pinkesh.vaghela@einfochips.com?part=3